Industrial and floor joint sealing in Gundleton, Hampshire
Planning work on a floor joint in Gundleton? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- A gap opening alongside old joint filler
- Dock area joints that have failed first
- A rough ride across broken joints
Need floor joint sealing in Gundleton?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Gundleton
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. If you are dealing with a rough ride across broken joints and grimy joint lines spoiling a showroom floor, we can help, whatever the surface. For commercial sealant work in Gundleton, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Jobs around smaller places like Gundleton are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we’ll take it from there.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Gundleton (SO24)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Maintenance after handover
A few simple habits keep the new joints working:
- Ask drivers not to drag forks or pallets
- Make joint checks part of your floor inspections
- Mention any aggressive cleaning regime at quote stage
- Plan for a top-up on newer floors
Keep traffic off fresh joints until the time we give you and it pays to stick to it. In a busy building, barriers keep early traffic away.
Grit in an open joint does damage every time a wheel crosses it. Filling it ends that cycle before it becomes a repair.
Why it’s worth doing now in Gundleton
Duct tape or a general builders’ sealant can seem to buy some time. None of it is designed for wheel loads and traffic soon pulls it out. The right filler or sealant saves doing it twice. One visit to deal with every failing joint makes more sense than several trips to a place like Gundleton. Photos of every joint help us quote for the whole job.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What you get with us
- CHAS accredited contractor
- Work carried out by CSCS-carded applicators
- One number for every site we cover
- Workmanship guaranteed for 12 months
See our cost guide and how we’re accredited.
From enquiry to sign-off
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Smaller jobs around Gundleton can be grouped with others nearby. A fixed quote is given before anything starts.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
What we need from you
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
- Tell staff and tenants when we will be in
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email the details over with what you know.
Related advice
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
FAQs: Gundleton
Does your area include sites such as Lower Soldridge Business Park, near Gundleton?
Yes. Estates, retail parks and business parks around Gundleton, Lower Soldridge Business Park among them, are all within reach. A few photographs and the unit address let us price the work.
Must our site in Gundleton stop work while the joints are done?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Can you fill joints where the arrises have spalled?
Filling against broken edges doesn’t last. If the arrises have spalled, we’ll say they need repair before filling, so you can decide how to proceed.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is it normal for joint filler to separate?
Separation usually comes from slab shrinkage, poor preparation or the wrong product. We diagnose the cause before suggesting a fix.
Is Gundleton in your area?
Yes. We cover Gundleton. To discuss a job, give us a call on 01277 525 020 or email the details over.
Slabs, ramps and loading bays in Gundleton
Two named trading, business or retail sites lie within about 3 miles of Gundleton. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Rainfall across the South East, Gundleton included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
For a school such as Perins School, playground and building joints can be done in the holidays. Office parks like Lower Soldridge Business Park (to the north-east of Gundleton) have decks, ramps and clad elevations whose joints take movement every day. Another example is Barton Industrial Estate, which lies north of Gundleton, where floors and yards would be done in stages around the occupiers.
Gundleton is about 7 miles south-west of Alton, in Hampshire. Anywhere in SO24, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Gundleton is one of 723 places in Hampshire on our list for floor joints. Our Southampton page has more on work in that area, about 17 miles away.
Business premises anywhere in SO24 are within our area. If your site is on Goscombs Lane and Bighton Lane or close by, send details and we’ll quote for floor joints. Nearby places we also cover include Bishop's Sutton (1 mile south-west), New Alresford (2 miles west), Bramdean (3 miles south), Hinton Ampner (4 miles south) and Cheriton (4 miles south-west). Further afield, our area takes in Basingstoke (12 miles north), Winchester (9 miles west), Eastleigh (13 miles south-west), Horndean (14 miles south), Chandler's Ford (14 miles south-west) and Alton (7 miles north-east).
What’s near Gundleton
Around Gundleton, our work takes us to commercial buildings near Three Horseshoes Public House and the streets around them. A little further out are Barton Castle (2.9 miles north). Not far away are Shutts Copse and Red Hill.
How the job changes by surface
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. A later top-up usually puts that right, and we will explain it when we quote.
Isolation joints at walls and columns
Joints around columns and along walls let the slab move without cracking against the structure. A flexible product suits them better than a stiff filler.