Floor Joint Sealing in Mytchett
Work needed on a floor joint in Mytchett? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Dock area joints that have failed first
- Chipped and spalling edges along forklift routes
- Flexible sealant torn out by wheels
Floor joint sealing across Mytchett
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
What sealant work can’t fix
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Level or flatness problems across the floor
- Worn screed or surface finishes
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
Not sure which it is? You can ring 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Where we work in Mytchett
- Loading bays
- Saw-cut induced joints
- Joints along racking aisles
- Construction joints
- Retail and showroom floors
- Forklift and pallet-truck routes
Floor joint sealing for commercial buildings in Mytchett
Most industrial slabs are divided into panels by saw-cut joints and construction joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see, so the arrises are supported and grit stays out. We work on joints along racking aisles, saw-cut induced joints and loading bays, and what we are called in for most is scruffy, dirty joint lines on a shop or showroom floor and failing joints at loading bays and dock doors. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Mytchett is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Work in a smaller place like Mytchett is typically one building at a time, so we gather photos and measurements first. That way the right materials come on the day and the job is done in one visit where possible.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Mytchett (GU16)
- Region
- Surrey
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Also near Mytchett
More services for Mytchett
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Stop forks and pallets being dragged across joints
- Hold traffic back until the product has cured
- Allow for topping up joints as a new slab settles
- Keep photographs of joints that look like they’re failing
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Every vehicle on a busy aisle hits a damaged joint. Early treatment protects wheels, loads and drivers as much as the floor.
Should maintenance staff do it?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need, and our waste is bagged and taken away as we go. If neighbouring businesses or buildings around Mytchett need work too, visits can be combined. Mention the building’s opening times and we will work within them.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Share your working hours and any access restrictions
- For older buildings, check the asbestos register before work
- Point out parking and an unloading spot
Getting a fixed quote
For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. Our quote form is another easy route.
Related advice
What happens if it’s left?
Holding off until the whole floor can close can take a long time. Phased in zones, the busiest routes can be treated first and the remainder follows on a plan that suits you. In a smaller place such as Mytchett, getting a contractor back for a second visit takes time, so it’s worth dealing with every failing joint at once.
The specified product makes a difference, and so does the preparation. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in Mytchett
- Over 20 years of commercial sealing
- Work carried out by CSCS-carded applicators
- One number for every site we cover
- Public liability insurance in place
Read how commercial sealant jobs are priced or how we’re accredited.
FAQs: Mytchett
Is a smaller place like Mytchett outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is a hospital such as Frimley Park Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Why is there a gap next to the joint filler?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. A top-up normally puts it right.
Different surfaces, different methods
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. A later top-up normally puts that right, and we will explain it when we quote.
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They often see more movement than sawn joints, and that shapes the product choice.
Warehouse floors and decks around Mytchett
At about 31 miles from central London, Mytchett is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift. Rainfall across the South East, Mytchett included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open.
For a school such as Mytchett Primary School, playground and building joints can be done in the holidays. On a site such as Farnborough Business Park, 1.6 miles west of Mytchett, the movement joints are in car park slabs, paving and building elevations. At places like Invincible Road Industrial Estate, 1.6 miles west of Mytchett, joints are sealed a section at a time so operations carry on.
Mytchett is about 2 miles south of Frimley, in Surrey. Commercial clients in Mytchett can call on us for floor joints, as part of our coverage of Surrey. Mytchett is one of 379 places in Surrey on our list. For work in that direction, see our Reading page (15 miles or so).
We take on floor joints across the GU16 postcode area, for business premises of every kind. We cover commercial and managed buildings on Wynfields, Coleford Close and Burgess Close. Main routes into Mytchett include the B3411. Close to Mytchett, our area also takes in North Camp (1 mile south-west), Ash Vale (2 miles south), Farnborough (2 miles west), Cove (3 miles west) and Southwood (3 miles west). A short drive away, we cover Guildford (7 miles south-east), Woking (7 miles east), Camberley (3 miles north), Farnham (6 miles south-west), Egham (12 miles north-east) and Walton-on-Thames (15 miles north-east).
Near you in Mytchett
Around Mytchett, our work takes us to commercial buildings near Henry Tyndale School, Prince of Wales pub and Sixth Form College, among other places. Also close by are Frimley Lodge Park (0.6 miles north) and National Aerospace Library (1.4 miles west). The nearest railway station is Farnborough North station, roughly 1.1 miles north-west of the centre. Other landmarks nearby include Frimley Park Hospital (2 miles north) and Royal Army Dental Corps Historical Museum (1.8 miles south-west). Not far away are Danger Hill and Aunt's Pool.