Longside floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units in Longside. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Brittle joint filler breaking up
- Scruffy, dirty joint lines on a shop or showroom floor
- A rough ride across broken joints
Need floor joint sealing in Longside?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing around Longside: how the place shapes the job
Being in the east of Scotland, Longside gets less rain than the west coast. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
On industrial estates such as Thunderton Industrial Estate, which lies east of Longside, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Longside is about 5 miles west of Peterhead, in Aberdeenshire. Across the AB42 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Longside is one of 179 places we cover in Aberdeenshire. Our Aberdeen page has more on work in that area (26 miles or so).
Postcode districts covered here: AB42 for floor joints. We cover commercial and managed buildings on Market Hill, Main Street and Station Road and the roads nearby. Close to Longside, our area also takes in Mintlaw (2 miles west), Rora (3 miles north-east), Downiehills (3 miles east), Old Deer (4 miles west) and Fetterangus (4 miles north-west). Bigger towns within reach include Peterhead (5 miles east), Fraserburgh (12 miles north), Ellon (11 miles south-west), Roanheads (6 miles east), Clerkhill (5 miles east) and Port Henry (6 miles east).
Local landmarks in Longside
Well-known places in the area include Inverugie Castle (4.2 miles east) and Carnegie Inverurie Museum (1.9 miles south-west). Open spaces near Longside include Hill of Aldie and Pitfour Lake.
Floor joint sealing in Longside
Open joints take a beating from forklift and pallet-truck wheels. Each crossing knocks the unsupported edge, and over time a neat cut turns into a ragged channel. A properly filled joint carries the wheel over and protects both arrises. It also smooths the route for drivers and stock. The enquiries we see most involve failing joints at loading bays and dock doors and filler that has parted from one face, across loading bays, saw-cut induced joints and joints along racking aisles. For commercial sealant work in Longside, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Travel to smaller places like Longside is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- Longside (AB42)
- Wider area
- Aberdeenshire
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Signs you need floor joint sealing in Longside
Small, hard wheels put a lot of load through a very small area. Crossing an open joint, the wheel drops and knocks the opposite arris and those knocks chip the edge apart bit by bit.
Typical triggers for a call:
- Trucks and loads jolting over damaged joints
- Failing joints at loading bays and dock doors
- Flexible sealant torn out by wheels
- Old filler gone hard, cracked or loose
A healthcare site such as Ugie Hospital, 5.6 miles to the east of Longside, depends on car parks, ramps and service yards whose joints take traffic all day.
What to look for in a quote
- Will RAMS and insurance details be available?
- What level of public liability insurance do they hold?
- Is the sealant right for the movement and the substrate?
- Can the work be phased to keep areas open?
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. Travel to smaller Scottish places like Longside is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Before we start on site
- Agree which areas must stay open
- Let building users know which areas are affected
- Point out parking and an unloading spot
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Advice
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Quoting for work in Longside
A fixed quote reflects the actual work. It takes account of:
- Quantities, in metres or numbers
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
- The site’s rules and procedures
Pricing floor joints depends on how many there are, their condition and the access. Call for a quote.
Sending details for a quote
To price the job accurately, we need to understand the site. Send us:
- The product your specification calls for
- Clear photographs of the problem areas
- How the joints are reached, and at what height
- Any dates the work must fit around
For a fixed quote, call the office on 01277 525 020 or email the details over. Our quote form is another easy route.
When to bring in a specialist
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Places near Longside
More services for Longside
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Worn screed or surface finishes
- Slab panels that rock or move under load
- Cracks across panels caused by settlement or overload
Not sure which it is? You can give us a call on 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Joints and surfaces we work on
- Retail and showroom floors
- Forklift and pallet-truck routes
- Joints along racking aisles
- Loading bays
- Construction joints
- Saw-cut induced joints
FAQs: Longside
Does your area include sites such as Thunderton Industrial Estate, near Longside?
Yes. Our area takes in Longside and its surroundings, with estates and business parks such as Thunderton Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
Do you take on work at healthcare sites like Ugie Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Is it normal for joint filler to separate?
On newer slabs, the concrete keeps shrinking after the joints are filled, so a semi-rigid filler can part from one face. A top-up normally puts it right.
When can forklifts run over new joint filler?
Cure times vary with the product and how cold the slab is. We will give you a time for each zone when we agree the phasing.
Can the warehouse stay open while you work?
We phase it. Areas are taken out of use a section at a time around the site hours and access windows you give us.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.