Floor Joint Sealing in Lonmore
Floor joint sealing and filling in warehouses, factories and industrial units in Lonmore. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Drivers complaining about joints on a route
- Brittle joint filler breaking up
- A gap opening alongside old joint filler
Floor joint sealing for businesses in Lonmore
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle floor joint sealing in Lonmore
Most industrial slabs are divided into panels with saw cuts and day joints, and every one of those joints is an exposed edge under hard wheels. We fill or seal them with a product matched to the traffic and the movement, so the arrises are supported and grit stays out. Most enquiries involve old filler gone hard, cracked or loose and a gap opening alongside old joint filler, across forklift and pallet-truck routes, saw-cut induced joints and loading bays. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Lonmore is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller Scottish places like Lonmore, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Place
- Lonmore (IV55)
- Wider area
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
After the work
For the best life from the joints:
- Plan for a top-up on newer floors
- Sweep debris out of open joints until they can be filled
- Start with the dock areas, where joints fail soonest
- Walk the main routes and inspect joint lines on a regular cycle
Normal floor cleaning is fine once the product has cured. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
Every vehicle on a busy aisle hits a damaged joint. Sorting it early looks after your equipment as well as the slab.
Why deal with it now?
Broken joints shake trucks, stock and operators alike. Wheels and bearings wear faster and loads can shift, which nobody budgets for. A properly filled joint smooths the route. For buildings near Lonmore, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why appoint us
- Old sealant cut out, never sealed over
- One number for every site we cover
- Fully insured, including public liability cover
- A Constructionline member, so easy to vet
Lonmore: questions and answers
Is Lonmore too far out for you?
Not at all. Lonmore is within our area. We cover the whole of Scotland. Good photos up front let us bring everything on the first visit.
Must our site in Lonmore stop work while the joints are done?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Can you phase floor joint work around operations?
In most cases, just the area being treated is coned off. Traffic returns to each zone once it has cured and the next zone follows.
Why is there a gap next to the joint filler?
On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. A top-up normally puts it right.
What information helps you price floor joint sealing?
Use our quote form, or email photos and a plan, with the traffic on each area. We then send a fixed quote that shows the products and zones.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Diagnose, treat, sign off
Occupied buildings need a little choreography. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. Tell us who will meet us and how to get in at your building near Lonmore. We will confirm the plan with the fixed quote.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Have the specification and drawings to hand
- Let us know about inductions and permits
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Read more
Owners, agents and contractors
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Building owners and managing agents use us on everything from one building to a spread of sites around Lonmore. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Places near Lonmore
Other services in Lonmore
Warehouse floors and decks around Lonmore
The sea is no more than about 2 miles from Lonmore. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, which is why split joints are worth sealing before the edges deteriorate. Being in the west of Scotland, Lonmore gets more rain than eastern areas. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. External sealing is booked for dry spells, with some give in the dates.
Around Lonmore, open joints collect water and debris, and the arrises are the next to go. In and around Lonmore, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Lonmore is in Highland. Lonmore sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Across Highland, 256 places are covered, including Lonmore.
Postcode districts covered here: IV55 for floor joints. Sites close to Lonmore are covered too, including Dunvegan (1 mile north-west), Kilmuir (1 mile north-west), Colbost (3 miles west), An t-Aodann Ban (6 miles north-east) and Coillore (8 miles south-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Lonmore
A little further out are Dunvegan Castle (2 miles north-west) and Giant Angus Macaskill Museum (1 mile north-west). For a walk, there’s MacLeod's Table.
How the job changes by surface
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. That is normally dealt with by topping up later, and we’ll explain it when we quote.
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.