Janetstown floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units in Janetstown and across Highland. CHAS accredited and fully insured, with a 12-month guarantee.
- Failing joints at loading bays and dock doors
- Sealant pulled out along a truck route
- Broken arrises where pallet trucks cross
Floor joint sealing near Janetstown
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Janetstown
We have been sealing commercial joints since 2005. Our CSCS-carded applicators follow your site induction and rules, and the business is CHAS accredited and a Constructionline member holding public liability insurance. Finished floor joints in Janetstown carry our 12-month guarantee. Most enquiries involve scruffy, dirty joint lines on a shop or showroom floor and flexible sealant torn out by wheels, across construction joints, loading bays and retail and showroom floors. Whether you call it commercial sealant work, mastic application or joint sealing, in Janetstown it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Travel to smaller places like Janetstown is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Janetstown (KW14)
- Region
- Highland
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Janetstown
Is Janetstown too far out for you?
No. Places such as Janetstown are covered as much as the big towns. Every Scottish council area is within our area. Good photographs up front let us bring everything on the first visit.
Is hospital work, at somewhere like Dunbar Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Can the warehouse stay open while you work?
The work is phased. Areas are taken out of use a section at a time. Tell us your site hours and access windows and we’ll plan around them.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
How soon can traffic go back on the floor?
Cure times vary with the product and the conditions. You will get a reopening time for each area before we start.
Do you guarantee industrial floor joints?
A 12-month guarantee covers the work we do. It covers our workmanship, not later slab movement or damage from impacts.
Commercial clients in Janetstown
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
How a job runs
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. For a building near Janetstown, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Getting the site ready
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
- Send any specification or drawings in advance
Ask for a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email drawings and photos.
Related advice
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Other services in Janetstown
Common problems we fix in Janetstown
Concrete slabs shrink as they dry out, and saw-cut joints give that shrinkage a planned place to crack. As the panels contract, the joints widen, and a filler placed early can part company with one face.
Any of the following is a good reason to get the joints checked over:
- Trucks and loads jolting over damaged joints
- Soft sealant dragged out of trafficked joints
- Open saw cuts full of debris
- Loading bay joints breaking down
A healthcare site such as Dunbar Hospital (1.8 miles north-east of Janetstown) depends on car parks, ramps and service yards whose joints take traffic all day.
Comparing quotes
- Are they CHAS accredited or on Constructionline?
- The named product and why it was chosen
- Whether primer will be used where the manufacturer specifies it
- Their approach to joint depth and backing
How the quote is worked out
To price the job, we consider:
- The size and state of each joint
- Whether old sealant has to be cut out first
- Travel to remote or island sites
- Specialist products, such as fire-rated or hygienic sealants
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Whether an asbestos survey exists
- The type of building and who uses it
- Where the site is, with the postcode
- A wide shot and a close-up of the area
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to ring 01277 525 020 or send photos by email.
Floor joint sealing in Janetstown: the local picture
Janetstown lies within about 3 miles of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so it pays to keep them sealed. Janetstown is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them.
In a school such as Thurso High School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Janetstown is about 3 miles south-west of Thurso, in Highland. Looking for floor joint sealing in Janetstown? We can help. 256 places across Highland fall within our area, Janetstown among them.
Business premises anywhere in KW14 are within our area for floor joints. We also cover Glengolly (1 mile east), Westfield (2 miles south-west), Thurso (3 miles north-east), Scrabster (3 miles north) and Forss (3 miles north-west). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Around Janetstown
The nearest railway station is Thurso station, about 2.4 miles north-east. Nearby you’ll also find Dunbar Hospital (1.8 miles north-east) and Thurso Heritage Museum (2.7 miles north-east). Open spaces near Janetstown include Broubster Leans RSPB Reserve and Loch Calder.
Surface by surface
Retail and showroom floors
In retail, joints take trolleys, castors and cleaning machines rather than forklifts. We pick a filler or sealant to suit and the finish matters as much as the performance.
Isolation joints at walls and columns
Where racking or plant sits near column joints, access is agreed before we start so nothing has to move unexpectedly.