The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Floor Joint Sealing in Hawkinge

Floor joint sealing and filling in warehouses, factories and industrial units in Hawkinge and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.

  • Flexible sealant torn out by wheels
  • Saw-cut joints left open and packed with grit
  • Broken arrises where pallet trucks cross
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS & Constructionline
£5m public liability

Floor joint sealing in Hawkinge

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Floor joint sealing in Hawkinge, done properly

Not every floor joint we treat is in a warehouse. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, and an open, grimy joint line looks poor as well as catching wheels. A flush, well-finished joint tidies the whole floor. We work on joints along racking aisles, retail and showroom floors and forklift and pallet-truck routes, and what we are called in for most is soft sealant dragged out of trafficked joints and broken arrises where pallet trucks cross. For commercial sealant work in Hawkinge, you deal with one contact from quote to sign-off, whether it’s one building or several.

In a smaller place such as Hawkinge, floor and movement joints are often in agricultural and rural business units, schools and the odd small industrial yard. Their slabs and walls still need movement joints that work.

Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.

Location
Hawkinge (CT18)
Region
Kent
Cover
12 months on our workmanship
Quote
Quoted before any work starts
Call
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

What the job involves on each surface

Loading bays and dock areas

Dock areas see tight turns, heavy loads and weather blowing in. Joints here typically fail first, so they are often the place to start.

Saw-cut induced joints

Most of the joints in a warehouse floor are saw cuts. We clear them back to clean concrete and fill them to the depth the product calls for with a flush finish.

What sets the cost

There’s no standard rate for sealant work, because every site is different. What we take into account:

  • The product specified
  • Site requirements such as inductions and permits
  • Quantities, in metres or numbers
  • Joint width, depth and condition

Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.

Details that help us quote

Whether it’s one area or a whole building, these details speed things up:

  • Asbestos survey details if the building is older
  • Approximate linear metres or a joint schedule
  • Any specification or named product
  • Whether the building will be occupied during the work

If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.

Work for main contractors and building owners

Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.

We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Hawkinge. Several sites can go on one quote, which keeps the paperwork simple.

Common problems we fix in Hawkinge

An ageing filler or sealant can go brittle and split especially under daily scrubbing and traffic. Once it has gone hard or come loose, it protects nothing.

If one of these sounds familiar, it’s time for a closer look:

  • A gap opening alongside old joint filler
  • Unfilled floor joints collecting dirt and grit
  • Grimy joint lines spoiling a showroom floor
  • Brittle joint filler breaking up

Another example is Concept Court Business Park, 1.4 miles to the south of Hawkinge, where floors and yards would be done in stages around the occupiers.

Before you book anyone

  • Their public liability cover
  • How the joint faces will be prepared and primed
  • Which product they’ll use, and why it suits the joint
  • Whether their applicators hold CSCS cards

How to choose a sealant contractor

Hawkinge: questions and answers

Do you cover business parks and estates near Hawkinge, such as West Park Farm North Retail Park?

Yes, sites like West Park Farm North Retail Park are within our area, along with the rest of Hawkinge. Send details of the unit and the work through our quote form for a quick quote.

Is a hospital such as Royal Victoria Hospital somewhere you can work?

Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.

What site paperwork can you supply?

Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.

Can you phase floor joint work around operations?

We phase it. Areas are taken out of use a section at a time around the site hours and access windows you give us.

Do you hold CHAS accreditation?

Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.

How do we get a quote for floor joints?

Approximate metres of joint, photos of typical and worst areas, and a floor plan are typically enough for a quick quote. We can visit where that helps so phone 01277 525 020 or use the quote form to set one up.

Do you have public liability insurance?

Yes. Our insurance certificate can be sent alongside the quote.

How a job runs

Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Work in places the size of Hawkinge is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.

  1. We walk the floor and mark up joint widths, edge damage and traffic routes.
  2. You receive a fixed quote showing products and phasing.
  3. Old fill and packed debris come out until both faces are sound.
  4. Dust is vacuumed out and primer applied where specified.
  5. The joint is filled to its specified depth and trimmed level.
  6. We hand each phase back when it can take traffic.

Before we start on site

  • Tell us which areas need to stay in use
  • Let building users know which areas are affected
  • Have the specification and drawings to hand

Request a quote

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or send details through our quote form with what you know.

Get a price

Advice

Why it’s worth doing now in Hawkinge

Not every joint needs stripping out completely. If old material is sound on one face and only a fine gap has opened, it may not all have to come out and the quote shows which approach suits each run. A failed joint lets water into a building whatever its size. Catching it early means a reseal rather than repairs.

No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.

What you get with us

  • Workmanship guaranteed for 12 months
  • One phone line for London, the South East and Scotland
  • A fixed quote before work starts
  • Sealing commercial buildings since 2005

Take a look at our cost guide and our accreditations.

Floor joint sealing in Hawkinge: the local picture

Hawkinge lies within about 3 miles of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. At about 60 miles from central London, Hawkinge is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds.

For a school such as The Churchill School, playground and building joints can be done in the holidays. For an estate such as Royal Victoria Hospital, 2 miles south of Hawkinge, the joints in ramps, decks and long building elevations all need attention over time.

Hawkinge is about 2 miles north of Folkestone, in Kent. If you’re looking for floor joint sealing in Hawkinge, we can help, as we do across Kent. Across Kent, 931 places are covered, including Hawkinge. Brighton is covered too, around 59 miles from Hawkinge.

Work on floor joints is covered throughout CT18, for business premises of every kind. We cover commercial and managed buildings on The Street, Spitfire Way and Waddington Drive. Close to Hawkinge, our area also takes in Densole (1 mile north), Old Hawkinge (1 mile east), Arpinge (1 mile south-west), Swingfield Minnis (2 miles north) and Selsted (3 miles north). Further afield, our area takes in Ashford (13 miles west), Canterbury (12 miles north), Dover (6 miles east), Deal (12 miles north-east), Hythe (4 miles south-west) and Tower Hamlets (6 miles east).

Near you in Hawkinge

We work on buildings around The Mayfly pub. For rail, the closest station is Folkestone West station, about 2 miles south. A little further out are Royal Victoria Hospital (2 miles south) and Elham Valley Countryside Centre And Railway Museum (2.1 miles south-west). Green spaces nearby include Cheriton Hill.

Map of Hawkinge © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.