Industrial and floor joint sealing in Findon, Aberdeenshire
Floor joint sealing for Findon, from a contractor working since 2005. Fully insured and CHAS accredited.
- Broken arrises where pallet trucks cross
- Sealant pulled out along a truck route
- Filler that has parted from one face
Floor joint sealing across Findon
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing for commercial buildings in Findon
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. If you’re dealing with sealant pulled out along a truck route and untidy open joints in a retail unit, we can help. A specialist sealant contractor works differently from a general builder: on jobs in Findon, preparation and product choice get the time they need.
In smaller places such as Findon, the joints we are asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Location
- Findon (AB12)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
For managing agents and facilities managers
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Findon can sit alongside others in a wider programme.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Other services in Findon
Traffic, movement and joints around Findon
Findon lies within about 1 mile of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. The east of Scotland, where Findon is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
Campuses like Robert Gordon University, 3.7 miles to the north of Findon, mix old and new buildings, with movement joints wherever they meet. Warehouse floors on estates like Blackhill Industrial Estate - B Block (to the west of Findon) carry pallet trucks and forklifts over every saw-cut joint.
Findon is about 6 miles south of Aberdeen, in Aberdeenshire. Any commercial site in Findon is covered, for single jobs and planned programmes alike. We work across 179 places in Aberdeenshire, from busy centres to rural villages. There’s a separate page for Aberdeen, roughly 6 miles from Findon.
Work on floor joints is covered throughout AB12. For a building on Earnsheugh Road, Earnsheugh Terrace and Old Inn Road or nearby, we can quote for floor joints. We also cover Portlethen Village (1 mile south), Marywell (1 mile north), Portlethen (1 mile west), Badentoy Park (2 miles west) and Cammachmore (3 miles south-west). Further afield, our area takes in Westhill (9 miles north-west), Stonehaven (8 miles south-west), Banchory (14 miles west), Kintore (15 miles north-west), Newmachar (14 miles north) and Balmedie (13 miles north).
Local landmarks in Findon
Around Findon, our work takes us to commercial buildings near Portlethen Academy, among other places. For rail, the closest station is Portlethen station, roughly 1 mile south-west of the centre. Other landmarks nearby include Aberdeen Trades Hospitals (5.4 miles north) and Blairs College (4 miles north-west). For a walk, there’s Blue Hill and Portlethen Moss.
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Common problems we fix in Findon
An ageing filler or sealant can go brittle and split, particularly where cleaning machines and traffic work it daily. Once it has gone hard or come loose, it protects nothing.
Typical triggers for a call:
- Drivers complaining about joints on a route
- Brittle joint filler breaking up
- Filler that has parted from one face
- Grimy joint lines spoiling a showroom floor
Large sites such as Aberdeen Trades Hospitals (5.4 miles north of Findon) have car parks, service roads and long elevations with movement joints in brick and panels.
Before you book anyone
- How the joint faces will be prepared and primed
- How joint depth will be controlled
- What the guarantee covers, and for how long
- Which product they’ll use, and why it suits the joint
What affects the price in Findon
Your fixed quote is built from the real scope. It allows for:
- Phasing around occupants
- The product specified
- The site’s rules and procedures
- Removal of failed or old sealant
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
Details that help us quote
A few photographs plus some basic facts will normally do. Please tell us:
- Anything awkward about access or site hours
- Specification clauses that apply
- Your programme or deadline
- Rough lengths or quantities, or drawings if you have them
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or email us with what you know.
Diagnose, treat, sign off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need, and our waste is bagged and taken away as we go. Travel to smaller Scottish places like Findon is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
What we need from you
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
- Share your working hours and any access restrictions
Request a quote
To get a fixed quote, speak to us on 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
Your questions answered
Is Findon too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Is hospital work, at somewhere like Aberdeen Trades Hospitals, something you do?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Do you repair broken joint edges?
Filling against broken edges doesn’t last. We’ll tell you if the joint edges need repairing first, so you can decide how to proceed.
Why has the filler pulled away from one side?
On newer slabs, the concrete keeps shrinking after the joints are filled, so a semi-rigid filler can part from one face. It is normally dealt with by topping up.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Does weather matter for sealant work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Different surfaces, different methods
Forklift and pallet-truck routes
Open route joints are hard on equipment and drivers. A filled joint lets wheels roll across and protects the floor.
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. We place them to depth and trim them level with the slab.