Kintore floor joint sealing
Floor joint sealing for Kintore, from a contractor working since 2005. Fully insured and CHAS accredited.
- Unfilled floor joints collecting dirt and grit
- Chipped and spalling edges along forklift routes
- A rough ride across broken joints
Need floor joint sealing in Kintore?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Kintore, done properly
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and we are CHAS accredited and a Constructionline member holding public liability insurance. Completed joints come with a 12-month guarantee on our workmanship. We work on retail and showroom floors, loading bays and joints along racking aisles, and the failures we are asked to look at most are filler that has parted from one face and joint edges breaking up under truck wheels. Most enquiries from Kintore start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Kintore is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Where
- Kintore (AB51)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Traffic, movement and joints around Kintore
Less than 3 miles from Kintore there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Kintore is in the east of Scotland, which is drier than the west. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them before winter limits the damage.
For an estate such as Inverurie Hospital, which lies north of Kintore, the joints in ramps, decks and long building elevations all need attention over time. Phasing is what makes joint work possible on busy sites such as Kintore Business Park (1.2 miles north of Kintore): one bay, aisle or car park row at a time. Parks like Midmill Business Park, 0.9 miles south-east of Kintore, combine paved areas, car parks and building elevations, each with joints that move.
Kintore is about 4 miles south of Inverurie, in Aberdeenshire. We send applicators to Kintore for floor joints. Kintore is one of 179 places we cover in Aberdeenshire. Aberdeen is covered too, some 10 miles away.
If you need floor joint sealing in AB51, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Henderson Park, Mcfadden Park and Castlepark Grove. Being close to the A96 and B977, Kintore is easy to get to with materials and equipment. Nearby places we also cover include Cottown (1 mile west), Kinellar (2 miles south-east), Port Elphinstone (3 miles north), Kinmuck (3 miles north-east) and Garioch (4 miles north). Further afield, our area takes in Westhill (6 miles south), Ellon (14 miles north-east), Banchory (13 miles south-west), Portlethen (14 miles south-east), Kemnay (4 miles west) and Oldmeldrum (7 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you ring 01277 525 020 or email us.
Local landmarks in Kintore
Kintore’s nearest station is Kintore station, about 0.7 miles north. Other landmarks nearby include Hallforest Castle (0.8 miles south-west) and Little Treasures: Toy Museum & Shop (2.5 miles west). Open spaces near Kintore include Tuach Hill.
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Building owners, agents and FMs in Kintore
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites around Kintore. Several sites can go on one quote, which keeps the paperwork simple.
Leave it or put it right?
While the arrises are intact, filling a joint is straightforward. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled, with longer closures to match. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Kintore before they leak.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why choose Mastic Doctor in Kintore
- Fixed quotes based on photos, drawings or a visit
- Fully insured, including public liability cover
- Health and safety: CHAS accredited
- A Constructionline member, so easy to vet
See our cost guide and our accreditations.
On site: what to expect
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Where we can, we combine work around Kintore with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
Before we start on site
- For older buildings, check the asbestos register before work
- Move anything stored against the joints
- Send your site hours and access windows
Request a quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to ring 01277 525 020 or email drawings and photos.
Related advice
Also in Kintore
Common questions from Kintore clients
Is a smaller place like Kintore outside your area?
No. Places such as Kintore are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Good photographs up front let us bring everything on the first visit.
Can you take on a job at a hospital such as Inverurie Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
How do we get a quote for floor joints?
Send details through our quote form or by email, with the traffic on each area. A fixed quote follows that shows the products and zones.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member.
When can forklifts run over new joint filler?
The wait is set by the product’s cure time and cooler floors take longer. Phasing is planned with that in mind.
Is the floor joint work guaranteed?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
What happens if the joint edges are damaged?
Edge condition is recorded when we look at the floor. Where they have broken away, we’ll tell you before quoting the filling so the filling isn’t wasted.
After the work
To get the most from the new sealant:
- Photograph any joint that starts to chip
- Start with the dock areas, where joints fail soonest
- Let us know what the floor is cleaned with
- Make joint checks part of your floor inspections
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. It is a known trait of new floors and a later top-up deals with it in the majority of cases.
Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it, with more downtime and more disruption.
What the job involves on each surface
Flexible floor sealants
Where joints move more, a flexible polyurethane floor sealant is often used. They don’t hold the arrises up as firmly as a semi-rigid fill, so they suit lighter traffic or movement joints.
Isolation joints at walls and columns
Perimeter and column joints get forgotten and fill up with dirt. We record them with the rest of the floor joints.