Industrial and floor joint sealing in Egham Hythe, Surrey
Floor joint sealing and filling in warehouses, factories and industrial units in Egham Hythe and across Surrey. CHAS accredited and fully insured, with a 12-month guarantee.
- Broken arrises where pallet trucks cross
- Joint fill separating from the concrete
- Cracked and crumbling joint fill
Floor joint sealing near Egham Hythe
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Egham Hythe
A working floor can rarely be closed for days on end, so we phase the work aisle by aisle or bay by bay. Tell us your site hours and access windows and we’ll plan around them, with goods still moving in the areas we aren’t in. We work on construction joints, loading bays and forklift and pallet-truck routes, and the usual reasons a site gets in touch are sealant pulled out along a truck route and unfilled floor joints collecting dirt and grit. One point of contact handles commercial sealant work in Egham Hythe from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Around places the size of Egham Hythe, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Concrete floors and yards in these buildings move and crack like any others.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Egham Hythe (TW18, TW20, TW19)
- Wider area
- Surrey
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Regular inspection catches problems early. In particular:
- Check joint lines on busy aisles regularly
- Let us know what the floor is cleaned with
- Keep grit out of unfilled joints in the meantime
- Keep trucks off new joints until we say they’re ready
Keep traffic off fresh joints until the time we give you and it pays to stick to it. In a busy building, barriers keep early traffic away.
Regular inspection catches failing fills before the edges go. A phased plan, worst routes first, spreads the work out so nothing is left to fail.
Also near Egham Hythe
What else we do in Egham Hythe
Why it’s worth doing now in Egham Hythe
Open joints are where dirt collects, out of reach of the floor cleaner. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. A failed joint lets water into a building whatever its size. Catching it early means a reseal rather than repairs.
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why clients in Egham Hythe choose us
- 12-month guarantee on workmanship
- Work to your specification and the manufacturer’s guidance
- Our applicators hold CSCS cards
- Fixed quotes based on photographs, drawings or a visit
Egham Hythe: questions and answers
Is Egham Hythe too far out for you?
No. Places such as Egham Hythe are covered as much as the big towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Will you take on work at estates like Pine Trees Business Park, close to Egham Hythe?
Yes. Estates, retail parks and business parks around Egham Hythe, Pine Trees Business Park among them, are all within reach. Photos and a short description are enough for a first look.
What do you need from us to quote?
Approximate metres of joint, photographs of typical and worst areas, and a floor plan are typically enough for a quick quote. For larger floors, a site visit is often best so call the office on 01277 525 020 or email us to set one up.
Do you offer coloured sealant?
It depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
How many days will you need on site?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Cost factors for floor joints
Quotes vary with the job. Expect it to depend on:
- Whether old sealant has to be cut out first
- The total length or number of joints
- Whether the work must be split into stages
- The size and state of each joint
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What we need to price the job
We can often quote from photos and a few details. It helps to include:
- Whether an asbestos survey exists
- The postcode of the building
- The type of building and who uses it
- When you need the work done
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, ring 01277 525 020 or email the details over.
Surface by surface
Retail and showroom floors
Retail joints see trolleys, footfall and scrubber-driers. The product is chosen for that traffic and the appearance is part of the brief.
Flexible floor sealants
Polyurethane floor sealants are available in a range of colours so ask if the colour matters.
Common problems we fix in Egham Hythe
Concrete slabs shrink as they dry out, and the saw cuts are there so it cracks in straight, controlled lines. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
Site and facilities staff are often the first to spot these:
- Dock area joints that have failed first
- Open saw cuts full of debris
- Old filler gone hard, cracked or loose
- Trucks and loads jolting over damaged joints
At places like Thorpe Industrial Estate (0.7 miles south-west of Egham Hythe), joints are sealed a section at a time so operations carry on.
What your quote should include
- Are they CHAS accredited or on Constructionline?
- Can the work be phased to keep areas open?
- Will RAMS and insurance details be available?
- Whether their applicators hold CSCS cards
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself typically taking anything from a day for one loading bay to several days for a large floor, split into phases. If neighbouring businesses or buildings around Egham Hythe need work too, visits can be combined. Tell us your site hours and we will plan around them.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Explain the parking and delivery arrangements
- Let building users know which areas are affected
- Send your site hours and access windows
Ask for a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Related advice
Floor joint sealing in Egham Hythe: the local picture
Central London is about 19 miles from Egham Hythe. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift. Less than 3 miles from Egham Hythe there are at least three named estates and business parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Office parks like Pine Trees Business Park, 0.6 miles to the north-east of Egham Hythe, have decks, ramps and clad elevations whose joints take movement every day. For an estate such as Ashford Hospital, which lies north-east of Egham Hythe, the joints in ramps, decks and long building elevations all need attention over time.
Egham Hythe is about 1 mile east of Egham, in Surrey. We send applicators to Egham Hythe for floor joints. Egham Hythe is one of 379 places we cover in Surrey. Sites around London have their own page, about 19 miles away.
Business premises anywhere in TW18, TW20 and TW19 are within our area for floor joints. We cover commercial and managed buildings on Pond Road, Green Lane and Glebe Road and the roads nearby. You’ll find Egham Hythe on or near the A320, so getting applicators and materials to site is simple. Close to Egham Hythe, our area also takes in Staines-upon-Thames (1 mile north-east), Egham (1 mile west), Thorpe (1 mile south), Hythe End (1 mile north-west) and Penton Hook (2 miles south-east). Further afield, our area takes in Guildford (12 miles south), Woking (8 miles south), Camberley (11 miles south-west), Epsom (13 miles south-east), Ewell (13 miles south-east) and Walton-on-Thames (6 miles south-east).
What’s near Egham Hythe
We work on buildings around The Magna Carta School, The Jolly Farmer Public House and The American School In England. For rail, the closest station is Egham station, about 1 mile west. Nearby you will also find Ashford Hospital (2.7 miles north-east) and Spelthorne Museum (0.8 miles north-east). Not far away are Gracious Pond and St Ann's Hill.