Industrial and floor joint sealing in Ealing, Greater London
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Ealing. Send photos or drawings for a fixed quote.
- A gap opening alongside old joint filler
- Unfilled floor joints collecting dirt and grit
- Dock area joints that have failed first
Floor joint sealing for Ealing sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. The ULEZ covers the whole of Greater London, and parking near a job is rarely simple. Let us know about any on-site parking or loading arrangements when you send the job details.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- A fixed quote follows, listing the treatment for each area and the order of work.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Getting the site ready
- Tell us which areas need to stay in use
- Point out parking and an unloading spot
- Let building users know which areas are affected
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or speak to us on 01277 525 020 or email the details over if you’d rather talk the job through.
Advice
Floor joint sealing for commercial buildings in Ealing
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so if the edges need repair before any filling, we’ll say so and explain how it affects the programme. We work on forklift and pallet-truck routes, construction joints and joints along racking aisles, and the usual reasons a site gets in touch are dock area joints that have failed first and saw-cut joints left open and packed with grit. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Ealing is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Distribution and trade units on London’s edges, and deck car parks across the city, hold most of its floor and slab joints. In Ealing, as everywhere in London, access, loading and the ULEZ all come into the plan.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Ealing (W5, W13, W3, NW10)
- Region
- Greater London
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Maintenance after handover
Once the work is signed off, these steps help:
- Treat loading bay joints first if they’re failing
- Ask drivers not to drag forks or pallets
- Make joint checks part of your floor inspections
- Allow for topping up joints as a new slab settles
Normal floor cleaning is fine once the product has cured. If you use strong chemicals or hot-water washing, mention it when we quote so we choose something that tolerates them.
Grit in an open joint does damage every time a wheel crosses it. Getting it filled stops the damage before it becomes a repair.
Should maintenance staff do it?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Common problems we fix in Ealing
Floor joints collect dust, oil, curing compound and cleaning residue. If the faces aren’t taken back to clean concrete first, the new material simply lifts out.
If one of these sounds familiar, it’s time for a closer look:
- Failing joints at loading bays and dock doors
- Saw-cut joints left open and packed with grit
- Grimy joint lines spoiling a showroom floor
- Sealant pulled out along a truck route
Warehouse floors on estates like Phoenix Trading Estate, 1.3 miles south of Ealing, carry pallet trucks and forklifts over every saw-cut joint.
What to look for in a quote
- Proof of insurance
- Can the work be phased to keep areas open?
- The terms of the workmanship guarantee
- Will RAMS and insurance details be available?
Why act early in Ealing
Waiting for a site-wide shutdown often means the joints keep getting worse. Phased in zones, the busiest routes can be treated first while the rest of the floor carries on. Getting scaffold, permits or access booked in Ealing takes effort, so while access is arranged it pays to renew all failing joints, not just the worst.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why us?
- Clear, fixed quotes
- Specification-led, product-correct work
- Failed material removed, not covered up
- CSCS-carded applicators
Read how commercial sealant jobs are priced or our accreditations and insurance.
FAQs: Ealing
Can you work in a London building with booked loading and goods-lift slots?
Yes. Inductions, permits and timed loading are routine for us in London. Share the building’s contractor rules and we’ll work to them. The ULEZ covers the whole of Greater London, which we allow for
Can you work on a hospital site such as Cygnet Hospital Ealing?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
What happens if the joint edges are damaged?
Filling against broken edges doesn’t last. If the arrises have spalled, we’ll say they need repair before filling and set out how that affects the job.
Will we need to close the floor?
Usually only the zone we’re working in has to close. Each zone reopens when the product can take traffic and the next zone follows.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Places near Ealing
What else we do in Ealing
What affects the price in Ealing
These are the things that shape the price:
- Distance, for remote addresses
- The product specified
- How accessible the joints are
- The size and state of each joint
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- When you need the work done
- Photos of the joints, close up and from further back
- Asbestos survey details if the building is older
- The postcode of the building
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Where floor joints take the most wear near Ealing
In London, decks, bays and service yards typically have to keep running, so we seal in sections and hand areas back as each cures. The 3 miles around Ealing take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Hospitals like Cygnet Hospital Ealing, 0.9 miles to the north-east of Ealing, have multi-storey or surface car parks whose joints carry vehicles round the clock. Across sites such as Boston Business Park (1.5 miles south-west of Ealing), floor and movement joints can be sealed in phases so units keep working.
Ealing is about 7 miles west of City of Westminster, in Greater London. Anywhere in W5, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. 764 places across Greater London fall within our area, including Ealing. London is covered too, around 9 miles from Ealing.
Commercial sites across W5, W13, W3 and NW10 are covered. Streets here include High Street, Coleridge Square and Station Road, and sites on any of them can send details for a fixed quote. You will find Ealing on or near the A40 and B452, so getting applicators and materials to site is simple. Just outside Ealing, we also work in South Ealing (1 mile south), Pitshanger (1 mile north), Brentham Garden Suburb (1 mile north), Hanwell (1 mile west) and West Ealing (1 mile west). Bigger towns within reach include London (9 miles east), City of Westminster (7 miles east), Marylebone (7 miles east), Kensington (5 miles east), St Pancras (8 miles east) and Shoreditch (10 miles east).
Local landmarks in Ealing
We work on buildings around The Red Lion pub, Christ the Saviour Church of England Primary School and Great Ealing School, among other places. You will also find Walpole Park (less than half a mile north-east) and Library for Iranian Studies (1.5 miles east). Ealing’s nearest station is Ealing Broadway station, about 0.5 miles north-east. Nearby you’ll also find London Designer Outlet (3.3 miles north) and Gunnersbury Park House - Large Mansion (1.2 miles south-east). The countryside around Ealing includes Castlebar Hill and Middle Lake.