Industrial and floor joint sealing in Craigellachie, Moray
Floor joint sealing in Craigellachie, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Old filler gone hard, cracked or loose
- Chipped and spalling edges along forklift routes
- Unfilled floor joints collecting dirt and grit
Floor joint sealing for Craigellachie sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Check joint lines on busy aisles regularly
- Tell us about strong cleaning chemicals before we quote
- Treat loading bay joints first if they’re failing
- Clear packed debris from open joints regularly
Keep traffic off fresh joints until the time we give you, and it’s worth enforcing. In a busy building, barriers keep early traffic away.
Edges tend to break slowly at first, then quickly. Once the first piece is out, wheels drop further and hit harder, so it pays to act at the first signs.
Floor joint sealing for commercial buildings in Craigellachie
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. We work on forklift and pallet-truck routes, joints along racking aisles and saw-cut induced joints, and what we are called in for most is saw-cut joints left open and packed with grit and chipped and spalling edges along forklift routes. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Craigellachie, that means joint design, primers and backing rod as standard.
Around smaller Scottish places like Craigellachie, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Slabs and yards take vehicles, rain and frost.
Our workmanship is guaranteed for 12 months, in Craigellachie as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Craigellachie (AB38)
- Region
- Moray
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Craigellachie
Must our site in Craigellachie stop work while the joints are done?
Normally not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
Is Craigellachie off your patch?
No. Places such as Craigellachie are covered as much as the big towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
How long does a job like this take?
That varies with the scale of the job, but the work typically takes a day for smaller units, with bigger warehouse floors programmed over several visits. For bigger or phased jobs, we will set out a timescale with the quote.
Should floor joints be filled or sealed?
It depends on the traffic and the movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
Towns and villages near Craigellachie
Other services in Craigellachie
Our process
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Craigellachie. We will confirm the plan with the fixed quote.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Preparing the site
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
- Flag any permit to work we will need
Request a quote
For a fixed quote, call the office on 01277 525 020 or email us, telling us the site location and the nature of the job. Our quote form is another easy route.
Read more
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Traffic, movement and joints around Craigellachie
Craigellachie is in the east of Scotland, which is drier than the west. Frost and de-icing salt still find their way into open external joints. Sealing them in drier months limits winter damage.
In and around Craigellachie, the right filler or sealant for each joint depends on the traffic and the movement it takes. Sites like Fleming Hospital (to the south-west of Craigellachie) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Craigellachie is about 12 miles south-east of Elgin, in Moray. Any commercial site in Craigellachie is covered. Craigellachie is one of 59 places we cover in Moray for floor joints. Aberdeen is covered too, some 46 miles away.
Business premises anywhere in AB38 are within our area for floor joints. Streets here include Lawrence Road, John Street and Spey Road. Sites close to Craigellachie are covered too, including Aberlour (2 miles south-west), Charlestown of Aberlour (2 miles south-west), Rothes (3 miles north), Dufftown (4 miles south-east) and Drummuir (6 miles east). Further afield, our area takes in Elgin (12 miles north-west), Buckie (15 miles north-east), Keith (9 miles north-east), Ashgrove (11 miles north), Fochabers (9 miles north) and Lhanbryde (10 miles north). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Local landmarks in Craigellachie
Recent enquiries here include premises near Fiddichside Inn. Other landmarks nearby include Fleming Cottage Hospital (2 miles south-west) and Ladycroft Agricultural Museum (2.7 miles west). Open spaces near Craigellachie include Loch Park and Ben Aigan.
When it isn’t the sealant
Honesty saves time and money. Fresh joints won’t solve:
- Unstable slabs moving under traffic
- A failing floor coating, which is a flooring contractor’s job
- Uneven floors that need grinding or levelling
Not sure which it is? You can ring 01277 525 020 or email the details over and we will tell you honestly before you book.
Joints and surfaces we work on
- Joints along racking aisles
- Forklift and pallet-truck routes
- Retail and showroom floors
- Loading bays
- Saw-cut induced joints
- Construction joints
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- The product specified
- Induction, permit and paperwork requirements
- The size and state of each joint
- Travel to remote or island sites
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Before you send an enquiry
Whether it’s one area or a whole building, the same details help:
- The product your specification calls for
- Rough lengths or quantities, or drawings if you have them
- Whether an asbestos survey exists
- Access details, including height
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email a schedule or drawings to discuss it first.
How the job changes by surface
Loading bays and dock areas
We normally work through dock areas a few bays at a time so deliveries keep moving. Tell us your site hours and access windows and we’ll plan around them.
Semi-rigid joint fillers
A semi-rigid fill can separate along one side while a slab is still shrinking. A later top-up usually puts that right, and we will explain it when we quote.