Craigellachie facade sealing
We carry out facade joint and window perimeter sealing on commercial buildings in Craigellachie. Send details for a fixed quote.
- Air leaks through failed facade joints
- Weathered joints at frame-to-structure perimeters
- Water coming in around window frames
Need facade sealing in Craigellachie?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
How we handle facade sealing in Craigellachie
Managing agents and owners in Craigellachie ask us to, we reseal perimeters across whole elevations or a handful of problem windows. Either way, the method is the same: old sealant out, faces cleaned, depth set and a new bead tooled in. Each job carries our 12-month guarantee. If you’re dealing with hard, chalky sealant that no longer flexes and facade joints cracked through the middle, we can put it right, on shopfront frames, coping and flashing joints and stone and brick facade joints alike. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Craigellachie is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site around Craigellachie, we plan the mastic in as few trips as the programme allows. Send drawings, photos and the programme so everything needed arrives on the first day.
A 12-month guarantee applies to all our work in Moray. If an installation problem shows up, give us a call on 01277 525 020 or email the details over and we’ll arrange a return visit.
- Location
- Craigellachie (AB38)
- Wider area
- Moray
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Other services in Craigellachie
Work for main contractors and building owners
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
When something else is needed
Before quoting, we check that sealant is the right answer. It won’t put right:
- Damp caused by condensation inside the building
- Installing or repairing glazing systems
- Specialist high-level access methods
If in doubt, speak to us on 01277 525 020 or send photos by email and we will say what we think before you book.
Where we work in Craigellachie
- Shopfront frames
- Stone and brick facade joints
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Cladding panel joints
- Window and door perimeters
Leave it or put it right?
Leaving failed perimeter sealant also makes the eventual job bigger: edges get wet, render and timber deteriorate and frames can move. Early action keeps it simple. Around smaller places like Craigellachie, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
Why appoint us
- Colours confirmed for the specified product
- 12 months’ guarantee on every job
- Public liability insurance in place
- Over 20 years of commercial sealing
Craigellachie: questions and answers
Can you work to our programme on a site in or near Craigellachie?
Yes. The mastic is planned around your key stages. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Is a smaller place like Craigellachie outside your area?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
What type of sealant goes on window perimeters?
It depends on the joint, the substrate and any specification. BS EN 15651 Parts 1 and 2 cover facade and glazing sealants, and specifications often name them and we follow the specified product.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Looking after the joints
Problems stay small when the joints are checked regularly. In particular:
- Brief window cleaners about newly sealed joints
- Never let anyone seal over old sealant
- Check that rainwater leaves the facade the way it was designed to
- Confirm the survey covers external sealants in older buildings
After heavy weather, check vulnerable elevations for signs of water inside. An early report usually means a small reseal rather than a bigger repair.
Coordinate facade sealing with other external works. One set-up for several trades saves money and limits disruption.
Facade sealing around Craigellachie: how the place shapes the job
Craigellachie is on Scotland’s drier eastern side. Frosty spells still affect external mastic dates. External dates keep a little give. Several hotels sit less than 2 miles from Craigellachie. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up.
On a healthcare site such as Fleming Hospital, 2 miles south-west of Craigellachie, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully. Work at a hotel such as Craigellachie Hotel, less than half a mile west of Craigellachie, tends to be programmed around bookings, mastic included.
Craigellachie is about 12 miles south-east of Elgin, in Moray. Craigellachie sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Craigellachie is one of 59 places we cover in Moray for facade joints. There’s a separate page for Aberdeen, roughly 46 miles from Craigellachie.
Postcode districts covered here: AB38 for facade joints. If your site is on Lawrence Road, John Street and Spey Road or close by, send details and we will quote for facade joints. Just outside Craigellachie, we also work in Aberlour (2 miles south-west), Charlestown of Aberlour (2 miles south-west), Rothes (3 miles north), Dufftown (4 miles south-east) and Drummuir (6 miles east). Further afield, our area takes in Elgin (12 miles north-west), Buckie (15 miles north-east), Keith (9 miles north-east), Ashgrove (11 miles north), Fochabers (9 miles north) and Lhanbryde (10 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Craigellachie
Locally, jobs take us to sites close to Fiddichside Inn, among other places. Nearby you’ll also find Fleming Cottage Hospital (2 miles south-west) and Ladycroft Agricultural Museum (2.7 miles west). Open spaces near Craigellachie include Loch Park and Ben Aigan.
From enquiry to sign-off
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Craigellachie are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- We start with photographs, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full and both faces cleaned back.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
What we need from you
- Arrange parking or a loading space
- Flag any permit to work we will need
- Tell us which areas need to stay in use
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or send photos by email to discuss it first.