Industrial and floor joint sealing in Corry, Highland
Floor joint sealing and filling in warehouses, factories and industrial units across Corry, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Broken arrises where pallet trucks cross
- Trucks and loads jolting over damaged joints
- Old filler gone hard, cracked or loose
Floor joint sealing across Corry
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Where we can, we combine work around Corry with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Tell us your opening times and when work is allowed
- Send asbestos survey details if the building is pre-2000
- Warn occupants and staff about the work
Getting a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
About our floor joint sealing in Corry
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. Site teams most often ask us about sealant pulled out along a truck route and loading bay joints breaking down, on retail and showroom floors, loading bays and construction joints. Facilities teams, main contractors and managing agents in Corry tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Weather windows decide external joint work around a place like Corry: dry faces and the right temperature are essential. Internal floors can be done whenever suits the site.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Corry (IV49)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Corry: questions and answers
Is a smaller place like Corry outside your area?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. We plan jobs in smaller places so return trips are kept to a minimum.
Can being near the sea in Corry affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Why is there a gap next to the joint filler?
Young concrete carries on shrinking for a long time, so a semi-rigid filler can part from one face. It is usually dealt with by topping up.
Can you phase floor joint work around operations?
We phase it. Areas are taken out of use a section at a time. Tell us your site hours and access windows and we’ll plan around them.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
What guarantee do you give on joint filling?
A 12-month guarantee covers the work we do. It covers our workmanship, not later slab movement or damage from impacts.
How long does a typical visit take?
We plan the time on site around your programme and access. You’ll have an expected duration with the quote.
Leave it or put it right?
Holding off until the whole floor can close can take a long time. Zone by zone, the worst aisles can be dealt with now while the rest of the floor carries on. Renewing every failing joint on one visit is the sensible approach for a place like Corry. Send photographs and we will quote for everything together.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why clients in Corry choose us
- Sealing commercial buildings since 2005
- Products installed to the manufacturer’s instructions
- Fully insured
- CHAS accredited
Commercial clients in Corry
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Corry can sit alongside others in a wider programme across Highland.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Common problems we fix in Corry
Older fills harden, shrink and crack with age especially under daily scrubbing and traffic. Once it has gone hard or come loose, it protects nothing.
Clients typically get in touch after noticing something like this:
- Broken arrises where pallet trucks cross
- Dock area joints that have failed first
- Untidy open joints in a retail unit
- Filler that has parted from one face
Around Corry, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Comparing quotes
- Their plan for phasing and protecting the area
- What level of public liability insurance do they hold?
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
Different surfaces, different methods
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. A later top-up usually puts that right, and we will explain it when we quote.
Saw-cut induced joints
Induced joints are sawn into a new slab to control where it cracks. They are narrow but open up as the panels shrink so trafficked runs need a filler that holds the arrises.
Nearby places to Corry
What else we do in Corry
Traffic, movement and joints around Corry
Corry is within about 1 mile of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Corry is on Scotland’s wetter western side. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. External sealing is booked for dry spells, with some give in the dates.
Hospital campuses such as Broadford Hospital, less than half a mile north-east of Corry, grow in stages, leaving movement joints wherever new blocks meet old.
Corry is in Highland. Our applicators travel to Corry for work on floor joints. Across Highland, 256 places are covered, Corry among them.
Work on floor joints is covered throughout IV49. If your site is on Ford Road, Riverbank and Liveras Park or close by, send details and we’ll quote for floor joints. Just outside Corry, we also work in An t-Àth Leathann (1 mile south), Blackpark (1 mile south-east), Harrapul (1 mile south-east), Kyleakin (7 miles east) and Kyle of Lochalsh (8 miles east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call the office on 01277 525 020 or email us.
Near you in Corry
A little further out are Mackinnon Memorial Hospital (less than half a mile north). Green spaces nearby include Bheinn Shuardail and Lochan Cruinn.
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is any of the following:
- Uneven floors that need grinding or levelling
- Wide or random cracking that suggests a structural issue
- Broken concrete either side of the joint
If you’re not sure, just ring 01277 525 020 or send photos by email and we’ll give you a straight answer.
Where we work in Corry
- Joints along racking aisles
- Forklift and pallet-truck routes
- Loading bays
- Construction joints
- Retail and showroom floors
- Saw-cut induced joints