Industrial and floor joint sealing in Compton, Surrey
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Compton and the surrounding area. Send details for a fixed quote.
- Chipped and spalling edges along forklift routes
- Saw-cut joints left open and packed with grit
- A gap opening alongside old joint filler
Floor joint sealing for businesses in Compton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Compton, done properly
Forklifts and pallet trucks are hard on open joints. Each crossing knocks the unsupported edge until a crisp saw cut becomes a wide, broken groove. Filling the joint properly gives the edges back their support. It also smooths the route for drivers and stock. If you have joint fill separating from the concrete and dock area joints that have failed first, we can put it right, on forklift and pallet-truck routes, construction joints and retail and showroom floors alike. A specialist sealant contractor works differently from a general builder: in Compton, that means joint design, primers and backing rod as standard.
Halls, schools and small commercial buildings near places like Compton have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Compton (GU10, GU9)
- Wider area
- Surrey
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Do you need floor joint sealing in Compton?
Oil, laitance, dust and old cleaning chemicals build up inside joints. Without cutting back to sound, clean concrete, the new material simply lifts out.
These are often picked up first by site or facilities staff:
- Unfilled floor joints collecting dirt and grit
- Joint fill separating from the concrete
- Brittle joint filler breaking up
- Loading bay joints breaking down
Another example is Farnham Trading Estate, 0.9 miles to the north-west of Compton, where floors and yards would be done in stages around the occupiers.
Before you book anyone
- Their pre-qualification and accreditations
- Whether old or failed sealant will be cut out, not overlaid
- How they handle RAMS and site documents
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Places near Compton
Other services in Compton
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- Respect the cure time before traffic returns
- Make joint checks part of your floor inspections
- Photograph any joint that starts to chip
- Ask drivers not to drag forks or pallets
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering and keep photographs so changes are easy to compare.
A broken joint on a main route is crossed by every truck on that route. Sorting it early looks after your equipment as well as the slab.
How the quote is worked out
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Site requirements such as inductions and permits
- The size and state of each joint
- Access and working height
- Distance, for remote addresses
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Details that help us quote
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Clear photographs of the problem areas
- The product your specification calls for
- Where the site is, with the postcode
- Approximate linear metres or a joint schedule
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or email us.
Your questions answered
Is Compton too far out for you?
No. Places such as Compton are covered as much as the big towns. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Is The Sands Business Centre, near Compton, within your area?
Yes. Our area takes in Compton and its surroundings, with estates and business parks such as The Sands Business Centre included. A few photos and the unit address let us price the work.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Where floor joints take the most wear near Compton
The 3 miles around Compton take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Compton lies roughly 35 miles out from central London. The roads out of London are lined with trade parks and distribution sheds.
Parks like The Sands Business Centre, 0.8 miles to the east of Compton, combine paved areas, car parks and building elevations, each with joints that move. For estates staff at a university like University for the Creative Arts, 1.9 miles west of Compton, building and paving joints are part of the planned maintenance list.
Compton is about 1 mile east of Farnham, in Surrey. We cover Compton, with the same fixed quotes and 12-month guarantee as everywhere else. Compton is one of 379 places in Surrey on our list for floor joints. We also cover Reading, some 19 miles away.
Anyone looking for floor joint sealing in GU10 and GU9 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Moor Park Lane, Compton Way and Moor Park Way or nearby, send details and we’ll quote for floor joints. Sites close to Compton are covered too, including Runfold (1 mile east), The Sands (1 mile east), Badshot Lea (1 mile north), Farnham (1 mile west) and Sandy Cross (1 mile north-east). Nearby towns on our patch include Guildford (9 miles east), Woking (11 miles north-east), Camberley (9 miles north), Frimley (7 miles north), Haslemere (9 miles south) and Cranleigh (13 miles east).
Around Compton
We work on buildings around Moor Park and Shepherd & Flock pub. For rail, the closest station is Farnham station, roughly 1.3 miles west. Nearby you will also find Museum of Farnham (1.8 miles west) and Farnham Castle (1.8 miles west). Not far away are Runfold Wood and Culverswell Hill.
On site: what to expect
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Compton, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Tell us what induction or permit system the site runs
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, speak to us on 01277 525 020 or use the quote form.
Advice
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Damaged or worn floor coatings and screeds
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
- Uneven floors that need grinding or levelling
Not sure which it is? You can ring 01277 525 020 or email the details over and we will tell you honestly.
Surfaces we seal
- Saw-cut induced joints
- Loading bays
- Construction joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Retail and showroom floors
What the job involves on each surface
Retail and showroom floors
We plan shop-floor work so trading can continue. Tell us your site hours and access windows and we will plan around them.
Saw-cut induced joints
Most of the joints in a warehouse floor are saw cuts. We clear them back to clean concrete and fill them to the depth the product calls for, finishing flush with the slab.