Comp floor joint sealing
Sealant work in Comp for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.
- Chipped and spalling edges along forklift routes
- Brittle joint filler breaking up
- Joint fill separating from the concrete
Floor joint sealing near Comp
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. If others near Comp need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Getting the site ready
- For older buildings, check the asbestos register before work
- Clear stock, furniture or equipment away from the joints
- Share your working hours and any access restrictions
Get a fixed quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, ring 01277 525 020 or email drawings and photos.
Read more
Floor joint sealing in Comp, done properly
We have been sealing commercial joints since 2005. Our CSCS-carded applicators follow your site induction and rules, and we are CHAS accredited and a Constructionline member, with public liability insurance in place. Completed joints come with a 12-month guarantee on our workmanship. If you’re dealing with grimy joint lines spoiling a showroom floor and failing joints at loading bays and dock doors, we can help. A specialist sealant contractor works differently from a general builder: on jobs in Comp, preparation and product choice get the time they need.
In and around smaller places like Comp, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Comp (TN15)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Flexible floor sealants
A flexible sealant suits perimeter and movement joints away from the heaviest traffic. Backing rod limits how deep the bead goes and keeps it off the joint bottom.
Construction joints
Day joints sit where one section of slab was cast against another. They often see more movement than sawn joints, and that shapes the product choice.
Nearby places to Comp
More services for Comp
Cost factors for floor joints
To price the job, we consider:
- Specialist products, such as fire-rated or hygienic sealants
- Joint width, depth and condition
- Whether old sealant has to be cut out first
- Working within restricted access windows
A quote for floor joints depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- What the building is and how it’s used
- The postcode of the building
- Asbestos survey details if the building is older
- Clear photos of the problem areas
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Looking after the joints
To get the most from the new sealant:
- Allow for topping up joints as a new slab settles
- Start with the dock areas, where joints fail soonest
- Tell us about strong cleaning chemicals before we quote
- Hold traffic back until the product has cured
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering and keep photos so changes are easy to compare.
Regular inspection catches failing fills before the edges go. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Traffic, movement and joints around Comp
The 3 miles around Comp take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Comp is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint.
Office parks like Bourne Enterprise Centre, 1.4 miles to the north-west of Comp, have decks, ramps and clad elevations whose joints take movement every day. Phasing is what makes joint work possible on busy sites such as Invicta Business Park (1.6 miles north of Comp): one bay, aisle or car park row at a time.
Comp is about 3 miles west of Kings Hill, in Kent. Looking for floor joint sealing in Comp? We can help. Across Kent, 931 places are covered, Comp among them. There’s a separate page for London, about 24 miles away.
We cover the TN15 postcode districts for floor joints. Just outside Comp, we also work in Platt (1 mile north-west), Wrotham Heath (1 mile north-east), Crouch (1 mile south-west), Claygate Cross (1 mile south-west) and Borough Green (1 mile west). Further afield, our area takes in Maidstone (8 miles east), Dartford (12 miles north-west), Sevenoaks (7 miles west), Royal Tunbridge Wells (11 miles south), Gravesend (10 miles north) and Tonbridge (7 miles south-west).
Landmarks near Comp
In Comp, that means premises near The Blue Anchor pub and Wrotham School and the streets around them. The closest station to Comp is Borough Green & Wrotham station, about 1.5 miles west of the centre. Well-known places in the area include Ightham Court (2.3 miles west) and Beechin Wood Archery Museum (less than half a mile west).
Questions about Comp
Will you take on work at estates like Bourne Enterprise Centre, close to Comp?
Yes. Estates, retail parks and business parks around Comp, Bourne Enterprise Centre among them, are all within reach. A few photographs and the unit address let us price the work.
Is Comp off your patch?
Not at all. Comp is within our area. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
What do you need from us to quote?
Approximate metres of joint, photographs of typical and worst areas, and a floor plan let us give a quick quote. For larger floors, a site visit is often best, and you can call the office on 01277 525 020 or email a schedule or drawings to arrange it.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit typically takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we will set out a timescale with the quote.
What happens if the joint edges are damaged?
A filler needs sound edges to grip. We’ll tell you if the joint edges need repairing first and set out how that affects the job.
Is it normal for joint filler to separate?
On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. A top-up normally puts it right.
Common problems we fix in Comp
Small, hard wheels put a lot of load through a very small area. Where a joint is open, the wheel dips and strikes the far edge and those knocks chip the edge apart bit by bit.
Clients usually get in touch after noticing one or more of the following:
- Grimy joint lines spoiling a showroom floor
- Sealant pulled out along a truck route
- Failing joints at loading bays and dock doors
- Cracked and crumbling joint fill
Schools like Platt Church of England Voluntary Aided Primary School often have long brick elevations with movement joints that age quietly.
Questions to ask before you book
- How the existing material will be dealt with
- Will CSCS-carded applicators be on site?
- How long is the guarantee, and what does it include?
- The named product and why it was chosen