The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Industrial and floor joint sealing in Cheriton, Kent

Floor joint sealing and filling in warehouses, factories and industrial units across Cheriton, carried out by CSCS-carded applicators. CHAS accredited and fully insured.

  • Grimy joint lines spoiling a showroom floor
  • Cracked and crumbling joint fill
  • Unfilled floor joints collecting dirt and grit
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
CHAS accredited
Fully insured: £5m PL

Floor joint sealing for businesses in Cheriton

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

How we handle floor joint sealing in Cheriton

Open joints take a beating from forklift and pallet-truck wheels. Each crossing knocks the unsupported edge, and over time a neat cut turns into a ragged channel. Filling the joint properly gives the edges back their support. It also smooths the route for drivers and stock. Most enquiries involve saw-cut joints left open and packed with grit and old filler gone hard, cracked or loose, on saw-cut induced joints, retail and showroom floors and construction joints. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Cheriton is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.

Rural business units around smaller places such as Cheriton often have new slabs laid inside older buildings. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.

Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.

Where
Cheriton (CT19, CT20, CT50)
Wider area
Kent
Guarantee
12 months on our workmanship
Quote
A fixed quote before we start
Call
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Common problems we fix in Cheriton

Floor joints collect dust, oil, curing compound and cleaning residue. Without cutting back to sound, clean concrete, the new material simply lifts out.

Typical triggers for a call:

  • Scruffy, dirty joint lines on a shop or showroom floor
  • Joint edges breaking up under truck wheels
  • Unfilled floor joints collecting dirt and grit
  • Trucks and loads jolting over damaged joints

In a school such as All Soul's Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.

Questions to ask before you book

  • Their plan for phasing and protecting the area
  • Will CSCS-carded applicators be on site?
  • Is the sealant right for the movement and the substrate?
  • Whether old or failed sealant will be cut out, not overlaid

Choosing a commercial sealant contractor

Cheriton: questions and answers

Can you work at a site such as Golden Valley Shopping Centre, by Cheriton?

Yes, sites like Golden Valley Shopping Centre are within our area, along with the rest of Cheriton. To start, just give us a call on 01277 525 020 or email the details over with the unit, the joints involved and your access times.

Do you take on work at healthcare sites like Royal Victoria Hospital?

Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.

Are you CHAS accredited?

Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.

How soon can traffic go back on the floor?

Cure times vary with the product and how cold the slab is. You will get a reopening time for each area before we start.

Will you just go over the old sealant?

No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.

Can you follow the specification on our project?

Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.

Can weather delay the job?

For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.

What happens if it’s left?

Waiting for a site-wide shutdown often means the joints keep getting worse. Zone by zone, the worst aisles can be dealt with now and the remainder follows on a plan that suits you. In a smaller place such as Cheriton, getting a contractor back for a second visit takes time, so we’d suggest renewing all the joints that are going, not just the worst.

Pricing floor joints depends on how many there are, their condition and the access. Call for a quote.

Why choose Mastic Doctor in Cheriton

  • Failed material removed, not covered up
  • Commercial sealant work since 2005
  • Work to your specification and the manufacturer’s guidance
  • Public liability insurance in place

Read what affects the cost or our accreditations.

Work for main contractors and building owners

Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.

Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Cheriton can sit alongside others in a wider programme.

When it isn’t the sealant

Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:

  • Uneven floors that need grinding or levelling
  • Cracks across panels caused by settlement or overload
  • Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)

If in doubt, call 01277 525 020 or use the quote form and we’ll say what we think.

Where we work in Cheriton

  • Construction joints
  • Retail and showroom floors
  • Forklift and pallet-truck routes
  • Loading bays
  • Saw-cut induced joints
  • Joints along racking aisles

On site: what to expect

At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Several jobs near Cheriton can be grouped on one trip. Mention the building’s opening times and we’ll work within them.

  1. We look at joint widths, edge condition and the traffic on each route.
  2. The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
  3. Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
  4. Dust is extracted from the joint and primer applied where the manufacturer specifies it.
  5. Filler or sealant goes in to the right depth and is finished flush with the slab.
  6. Each phase reopens when the product is ready for wheels, then we start the next.

Before we start on site

  • Agree which areas must stay open
  • Share the asbestos register for older buildings
  • Share your working hours and any access restrictions

Getting a fixed quote

The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.

Ask for a quote

Related advice

Cost factors for floor joints

Each job is priced on its own details. The main factors are:

  • Backing rod, priming and other preparation
  • Whether old sealant has to be cut out first
  • Whether the work must be split into stages
  • The site’s rules and procedures

There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.

Details that help us quote

We can often quote from photos and a few details. It helps to include:

  • The asbestos register, for older buildings
  • A wide shot and a close-up of the area
  • What the building is and how it’s used
  • Any dates the work must fit around

Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, phone 01277 525 020 or email a schedule or drawings.

Joints that move: notes for Cheriton

Cheriton sits close to the coast, within about 1 mile. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, and edges left open tend to break up faster. Rainfall across the South East, Cheriton included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.

At a retail site such as Golden Valley Shopping Centre (under half a mile south of Cheriton), joints in car parks, service yards and sales floors carry cars, cages and trolleys every day. At places like Shorncliffe Industrial Estate, 0.5 miles to the south of Cheriton, joints are sealed a section at a time so operations carry on.

Cheriton is about 1 mile west of Folkestone, in Kent. Our applicators travel to Cheriton for work on floor joints, handled exactly as we handle every other area. Cheriton is one of 931 places in Kent on our list for floor joints. Sites around Brighton have their own page, about 58 miles away.

Anyone looking for floor joint sealing in CT19, CT20 and CT50 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Oaks Road, Firs Lane and Star Lane, and sites on any of them can send details for a fixed quote. Main routes into Cheriton include the M20, which helps when planning parking and deliveries for the job. Nearby places we also cover include Sandgate (1 mile south), Folkestone (1 mile east), Peene (1 mile north-west), Newington (1 mile west) and Arpinge (1 mile north) for floor joints. A short drive away, we cover Ashford (12 miles west), Canterbury (13 miles north), Dover (8 miles north-east), Deal (14 miles north-east), Hythe (3 miles south-west) and Tower Hamlets (7 miles east).

Around Cheriton

Locally, jobs take us to sites close to The Folkestone Academy, Lower Leas Coastal Park and White Lion pub. The closest station to Cheriton is Folkestone West station, about 0.6 miles south-east of the centre. Other landmarks nearby include Sandgate Castle (1 mile south) and Elham Valley Countryside Centre And Railway Museum (1.3 miles north-west). Green spaces nearby include Sugar Loaf Hill.

Map of Cheriton © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.