Kent · England
Commercial sealant contractors in CT50
Sealant work for contractors, FMs and building owners across CT50, covering Cheriton and Sandgate, with a fixed quote before we start.
Sealant contractors for CT50
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Towns and villages in CT50
What we do in CT50
- Commercial washroom and wet-area sealing
- Expansion and movement joint sealing
- Commercial sealant contractors
- Coloured and colour-matched sealant
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- Construction and new-build mastic
- Every service
Let us know the job and your postcode and we’ll come back with a price: speak to us on 01277 525 020 or email us.
Postcodes nearby
Across Kent
Towns and villages in Kent
Areas we cover
How commercial sealant contractors works in CT50
Most commercial buildings carry hundreds of metres of sealant that nobody thinks about until it fails, and on a working site that normally surfaces as a leak, a stain or a complaint from occupiers. Mastic Doctor works as a commercial sealant contractor for facilities managers, managing agents and main contractors. Our job is to diagnose the failure, remove the old bead and seal again using a product chosen for the movement and exposure. We work on kitchen worktops and splashbacks, window and door perimeters and floor and threshold joints, and the failures we are asked to look at most are wall and floor joints that have lost their seal and water staining near frames, panels or ceilings.
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before the next one starts.
- You send photos, drawings or a list of the joints and areas involved.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- We plan around your site hours and access windows, phasing the work where areas have to stay in use.
- Failed sealant is cut out and each joint cleaned back to sound, dry faces.
- The depth is set, primer is used where the maker calls for it, and the fresh bead is applied and tooled.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
Pricing in CT50
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why clients in CT50 choose us
- Our applicators hold CSCS cards
- Fixed quotes based on photos, drawings or a visit
- CHAS accredited contractor
- Joints cleaned back to sound surfaces
Request a quote
For a fixed quote, call 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Around Cheriton
Around Cheriton, our work takes us to commercial buildings near Pent Valley Technology College, Church of All Souls and White Lion pub. Nearby too are All Soul's Church of England Primary School (under half a mile north-west), The Folkestone Academy (1.1 miles east) and Lower Leas Coastal Park (1.7 miles south-east). The closest station to Cheriton is Folkestone West station, roughly 0.6 miles south-east of the centre. Other landmarks nearby include Sandgate Castle (1 mile south) and Elham Valley Countryside Centre And Railway Museum (1.3 miles north-west). For a walk, there’s Sugar Loaf Hill.
Commercial premises across CT50
The commercial stock in CT50 mixes older town-centre buildings with newer offices and units, in places such as Cheriton and Sandgate and beyond. Surfaces decide the sealant, from masonry to powder-coated frames and shop-fit panels.
All of Greater London is inside the ULEZ, and much of the South East is within easy reach of the capital, and every job in CT50 starts with access, parking and site rules. On the coastal side of CT50, sea-facing elevations normally show failed joints first, so they’re worth inspecting more often.
Cheriton: In hotels such as The Royal Norfolk Hotel (1 mile south of Cheriton), refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes. Shops and cafés around stations like Folkestone West station, 0.6 miles south-east of Cheriton, trade from early, so work is timed around them.
Site staff or a sealant specialist?
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Different surfaces, different methods
Facade and cladding joints
Panel joints on cladding and rendered facades open and close with the temperature. The product has to suit the movement, and the depth has to be controlled with backing. We confirm the access in place before we quote.
Shop fronts and retail fit-outs
Most shops can’t close for a reseal. We plan around the access windows the store gives us.
Quoting for work in CT50
Quotes vary with the job. It mainly depends on:
- Location, for remote and island sites
- Access and working height
- The site’s rules and procedures
- Quantities, in metres or numbers
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
What we need to price the job
A few photos plus some basic facts will normally do. Please tell us:
- Access details, including height
- Your programme or deadline
- Specification clauses that apply
- Asbestos survey details if the building is older
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email us.
What we are called out for in CT50
A split down the middle of the bead tells a different story. Usually the movement was too much for the sealant chosen: a bead laid too thin, an over-stretched joint or the wrong movement class. The same product in the same joint tends to fail the same way, which is why we look at the joint design as well.
Common reasons buildings call us in:
- Mouldy silicone around WCs, urinals and vanity tops
- Leaks that seem to come through a sealant line
- Window and door perimeter joints that have cracked open
- Weathered facade sealant that no longer flexes
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Your questions answered
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Do you cover CT50?
Yes. CT50 falls within our area, and the simplest way to start is to phone 01277 525 020 or email drawings and photos.
How long does a job like this take?
That varies with the scale of the job, but the work normally takes part of a day on a small job and longer where several buildings or phases are involved. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Which site documents can you send us?
We confirm documents at quote stage: RAMS, an insurance certificate and CSCS details are the usual requests. Every applicator holds a CSCS card.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.