Industrial and floor joint sealing in Brough, Highland
Floor joint sealing and filling in warehouses, factories and industrial units throughout Brough and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Grimy joint lines spoiling a showroom floor
- Old filler gone hard, cracked or loose
- Filler that has parted from one face
Need floor joint sealing in Brough?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Common questions from Brough clients
Does a site in Brough have to shut while its joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we will plan from there.
Is Brough too small for you to travel to?
No. Small places get the same service as large ones. We work across every Scottish council area. We plan jobs in smaller places so return trips are kept to a minimum.
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can you phase floor joint work around operations?
Normally only the zone we’re working in has to close. Traffic returns to each zone once it has cured, then we move to the next.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
How long does a job like this take?
That varies with the scale of the job, but the work usually takes anything from a day for one loading bay to several days for a large floor, split into phases. For bigger or phased jobs, we’ll set out a timescale with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Floor joint sealing for commercial buildings in Brough
For sites in Brough and across Highland, the process is short: send details, get a fixed quote, we seal, and the work is guaranteed. A rough length of joint, photos of the worst areas and a site plan let us give a quick quote, or we can arrange a site visit. We work on saw-cut induced joints, construction joints and forklift and pallet-truck routes, and what we are called in for most is failing joints at loading bays and dock doors and saw-cut joints left open and packed with grit. Looking for mastic applicators who cover Brough? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Travel to smaller places like Brough is planned so the work is done in one trip where possible. Send photographs, joint widths and details of the traffic first.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Brough (KW14)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Nearby places to Brough
Also in Brough
How the job changes by surface
Saw-cut induced joints
Most of the joints in a warehouse floor are saw cuts. Each one is cleaned out and filled to the specified depth, finishing flush with the slab.
Retail and showroom floors
Retail joints see trolleys, footfall and scrubber-driers. We pick a filler or sealant to suit and the appearance is part of the brief.
Floors, slabs and movement joints in Brough
With the shore within about 1 mile, Brough counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. Being in the east of Scotland, Brough gets less rain than the west coast. Frost and de-icing salt still find their way into open external joints. Resealing before the cold months helps protect the edges.
A joint near Brough that has lost its sealant lets in water and grit, and the edges suffer next; we’ll tell you if the edges need repairing first.
Brough is about 7 miles north-east of Thurso, in Highland. We cover commercial sites throughout Brough, whether it’s a single job or part of a planned programme. Our Highland coverage takes in 256 places.
We cover the KW14 postcode districts for floor joints. Access to Brough is via the B855. Nearby places we also cover include Dunnet (2 miles south), Scarfskerry (3 miles east), Rattar (3 miles east), Castletown (4 miles south) and Murkle (5 miles south-west) for floor joints. Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Around Brough
A little further out are Westside Croft (1.6 miles south) and Castle of Mey (4.8 miles east). Not far away are Sanders Loch.
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Tell us about strong cleaning chemicals before we quote
- Expect fillers on young slabs to need a top-up
- Record damaged joints with a photo and a location
- Hold traffic back until the product has cured
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Grit in an open joint does damage every time a wheel crosses it. Filling it ends that cycle while it is still a straightforward job.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Brough is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- A fixed quote follows, listing the treatment for each area and the order of work.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Preparing the site
- Move anything stored against the joints
- Send your site hours and access windows
- Let us know about inductions and permits
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
When to call us in Brough
Floor joints collect dust, oil, curing compound and cleaning residue. Without cutting back to sound, clean concrete, the new material simply lifts out.
Look out for the following:
- Old filler gone hard, cracked or loose
- Grimy joint lines spoiling a showroom floor
- Chipped and spalling edges along forklift routes
- Dock area joints that have failed first
In and around Brough, the right filler or sealant for each joint depends on the traffic and the movement it takes.
What to look for in a quote
- How joint depth will be controlled
- The terms of the workmanship guarantee
- What site paperwork they can supply
- Which product they’ll use, and why it suits the joint
When it isn’t the sealant
Being straight saves everyone time. New sealant won’t cure:
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
- Structural cracking in the slab
- Unstable slabs moving under traffic
If you’re not sure, just call the office on 01277 525 020 or email the details over and we’ll give you a straight answer.
Surfaces we seal
- Joints along racking aisles
- Retail and showroom floors
- Loading bays
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Construction joints
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.