Industrial and floor joint sealing in Broomfield, Kent
Commercial sealant work in Broomfield for contractors, FMs and building owners: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.
- Joint edges breaking up under truck wheels
- Flexible sealant torn out by wheels
- Saw-cut joints left open and packed with grit
Floor joint sealing for businesses in Broomfield
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If others near Broomfield need work, visits can be combined. A fixed quote is given before anything starts.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
What we need from you
- Confirm the product named in the specification
- Flag any permit to work we will need
- Warn occupants and staff about the work
Request a quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or phone 01277 525 020 or send photos by email if you’d rather talk the job through.
Read more
Floor joint sealing in Broomfield, done properly
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see, so the arrises are supported and grit stays out. Site teams most often ask us about brittle joint filler breaking up and soft sealant dragged out of trafficked joints, on retail and showroom floors, saw-cut induced joints and construction joints. Most enquiries from Broomfield start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Halls, schools and small commercial buildings near places like Broomfield have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Broomfield (CT6)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Maintenance after handover
After handover, a little attention goes a long way:
- Clear packed debris from open joints regularly
- Walk the main routes and inspect joint lines on a regular cycle
- Start with the dock areas, where joints fail soonest
- Allow for topping up joints as a new slab settles
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so we choose something that tolerates them.
Joint damage starts slowly and then speeds up. Once the first piece is out, wheels drop further and hit harder so early treatment saves a lot of trouble.
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Places near Broomfield
More services for Broomfield
FAQs: Broomfield
Can you take on a job at a hospital such as Queen Victoria Memorial Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Does the sea air around Broomfield change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Do you guarantee industrial floor joints?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Can you phase floor joint work around operations?
In most cases, just the area being treated is coned off. Traffic returns to each zone once it has cured, then we move to the next.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Cost factors for floor joints
Your fixed quote is built from the real scope. It allows for:
- Removal of failed or old sealant
- Access and working height
- The total length or number of joints
- Working within restricted access windows
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
What to include in your enquiry
Diagnosis starts before we arrive. Tell us:
- Whether the building will be occupied during the work
- Clear photographs of the problem areas
- The postcode of the building
- Approximate linear metres or a joint schedule
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Honest limits
Some faults sit outside our scope, and we say so rather than covering them up:
- Spalled arrises, which need an edge repair first
- Level or flatness problems across the floor
- Structural cracking in the slab
If you are not sure, just call the office on 01277 525 020 or send details through our quote form and we’ll give you a straight answer before you book.
What we seal
- Retail and showroom floors
- Joints along racking aisles
- Loading bays
- Saw-cut induced joints
- Construction joints
- Forklift and pallet-truck routes
Joints that move: notes for Broomfield
Broomfield is within about 2 miles of the coast. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Broomfield lies roughly 55 miles out from central London. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day.
Large sites such as Queen Victoria Memorial Hospital, 0.8 miles north-west of Broomfield, have car parks, service roads and long elevations with movement joints in brick and panels. For a school such as Herne Church of England Infant School, playground and building joints can be done in the holidays. Business parks such as Eddington Business Park, 1.3 miles west of Broomfield, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Broomfield is about 1 mile south-east of Herne Bay, in Kent. Broomfield sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Broomfield is one of 931 places we cover in Kent. Our London page has more on work in that area.
Postcode districts covered here: CT6. Among the streets we cover are Barley Close, The Meadows and Ladyfields. We also cover Hunters Forstal (1 mile west), Herne (1 mile south-west), Hillborough (1 mile north-east), Millbank (1 mile south-east) and Hawthorn (1 mile east). A short drive away, we cover Canterbury (6 miles south-west), Margate (10 miles east), Ramsgate (11 miles east), Broadstairs (12 miles east), Whitstable (5 miles west) and Deal (14 miles south-east).
Around Broomfield
In Broomfield, that means premises near Curtis Wood, The Huntsman And Horn Public House and Herne Bay High School. Broomfield’s nearest station is Herne Bay station, roughly 1.5 miles west. Nearby you’ll also find Whitstable and Tankerton Hospital (4.4 miles west). For a walk, there’s West Blean and Thornden Woods.
Why it’s worth doing now in Broomfield
Holding off until the whole floor can close can take a long time. Zone by zone, the worst aisles can be dealt with now while the rest of the floor carries on. Halls, stores and units around places like Broomfield may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
What a job costs comes down to the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
Why choose Mastic Doctor in Broomfield
- Fixed quotes based on photographs, drawings or a visit
- Products installed to the manufacturer’s instructions
- Workmanship guaranteed for 12 months
- Failed material removed, not covered up