Expansion Joint Sealing in Bordon
Need expansion joint sealing in Bordon? It’s simple: send details, get a quote, we seal, guaranteed.
- Previous reseals laid over old sealant
- Joints where the bead has lost adhesion
- Movement joints with split or torn sealant
Expansion joint sealing across Bordon
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our expansion joint sealing in Bordon
The seal is what lets a movement joint do its job. Once it fails, water, grit and debris get in; the joint jams, its edges take the load and the arrises spall. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. If you have hardened, cracked sealant on exposed facades and expansion joints split through the centre of the bead, we can help, whatever the surface. Facilities teams, main contractors and managing agents in Bordon tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
In a smaller place such as Bordon, floor and movement joints are often in agricultural and rural business units, schools and the odd small industrial yard. Concrete floors and yards in these buildings move and crack like any others.
Work we carry out in Hampshire comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email a schedule or drawings and we will come back to it.
- Place
- Bordon (GU35)
- Region
- Hampshire
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Several jobs near Bordon can be grouped on one trip. Mention the building’s opening times and we’ll work within them.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Arrange parking or a loading space
- Agree which areas must stay open
- For older buildings, check the asbestos register before work
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Advice
When it isn’t the sealant
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Cracking or settlement that calls for an engineer’s assessment
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
If in doubt, give us a call on 01277 525 020 or email drawings and photos and we will say what we think before you book.
Surfaces we seal
- Cladding panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Precast concrete panel joints
- Blockwork control joints
- Brickwork movement joints
How the quote is worked out
What shapes the price:
- How accessible the joints are
- Joint width, depth and condition
- How much there is to seal
- Location, for remote and island sites
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What to include in your enquiry
It doesn’t need to be a full survey. These details are enough to start:
- The site address and postcode
- When you need the work done
- How the joints are reached, and at what height
- Drawings or a marked-up plan, if available
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, speak to us on 01277 525 020 or email the details over.
Looking after the joints
A few simple habits keep the new joints working:
- Avoid parking heavy plant or pallets on joint lines
- Reopen bays and walkways only after the stated cure time
- Raise snow-clearing blades over deck joints where possible
- Treat a small split as a warning, not a cosmetic issue
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file so future maintenance isn’t guesswork.
Floor joints with failed fillers break up quickly under wheels. Damaged edges make the floor rough and wear wheels faster. Sealing early protects the edges.
Do you need expansion joint sealing in Bordon?
Sometimes the sealant holds but the substrate breaks away. If the edge of the joint is friable, the bond fails with it so edge repair has to come before resealing.
If one of these sounds familiar, it’s time for a closer look:
- Joints where the bead has lost adhesion
- Rain penetration at brick or block movement joints
- Chipped joint edges on forklift routes
- Car park joints leaking onto vehicles below
Sites like Chase Hospital, 0.5 miles south of Bordon, carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Before you book anyone
- Will CSCS-carded applicators be on site?
- What the guarantee covers, and for how long
- Can the work be phased to keep areas open?
- Is the sealant right for the movement and the substrate?
Floors, slabs and movement joints in Bordon
At about 43 miles from central London, Bordon is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift. At least three named trading, business or retail sites lie within about 3 miles of Bordon. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
In a school such as Bordon Infant School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Phasing is what makes joint work possible on busy sites such as Bordon Enterprise Park (0.5 miles west of Bordon): one bay, aisle or car park row at a time.
Bordon is about 10 miles south-west of Aldershot, in Hampshire. Businesses, contractors and managing agents in Bordon use us for work on movement joints. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Sites around Portsmouth have their own page, about 23 miles away.
Business premises anywhere in GU35 are within our area for movement joints. Streets here include High Street, Station Road and Cobbett Square, and sites on any of them can send details for a fixed quote. Main routes into Bordon include the A325 and B3002, which helps when planning parking and deliveries for the job. Close to Bordon, our area also takes in Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). Bigger towns within reach include Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles north-west) and Petersfield (8 miles south-west).
Around Bordon
Recent enquiries here include premises near Mill Chase Academy and the streets around them. The nearest railway station is Liphook station, roughly 4.1 miles south-east of the centre. A little further out are The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). Green spaces nearby include Selborne Hill and Deadwater Valley.
Questions we’re asked in Bordon
Can you take on a job at a hospital such as Chase Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Bordon too far out for you?
Not at all. Bordon is within our area. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Which product is best for expansion joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote, so you know what’s going in.
What do you charge?
Each job is quoted on its own details. For yours, speak to us on 01277 525 020 or use the quote form with a description of the work.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Why do our movement joints keep failing?
The way it has failed usually tells us why: tearing down the centre means too much movement, and lifting off one side means poor adhesion. Broken edges are a third possibility.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.