Bordon commercial sealant contractors
Sealant work for offices, shops, hotels and other commercial buildings across Bordon, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Wall and floor joints that have lost their seal
- Leaks that seem to come through a sealant line
- Messy, uneven beads from earlier work that let the building down
Need commercial sealant contractors in Bordon?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Your questions answered
Is Bordon too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you supply sealant in our brand colour for a site in Bordon?
Yes, we can normally get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.
Is it OK to apply fresh sealant over existing beads?
Removal comes first, every time. Then the joint is cleaned, primed where the maker specifies, backed to depth and resealed.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards.
What do you need from us to quote?
Photos, drawings or a schedule of the joints are usually enough to start through the quote form on this site. Where we need to see it, we will arrange a site visit, then send a fixed quote.
Do you check for asbestos before removing sealant?
On older buildings, our first request is the asbestos survey. The duty to manage asbestos sits with the dutyholder, and we don’t remove asbestos-containing materials.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Commercial sealant contractors in Bordon
A reseal stands or falls on the preparation underneath it. Silicone has no grip on cured silicone, so the failed bead is cut out completely, then both faces are cleaned back to sound, dry material with no dust or grease on them. Where the sealant maker specifies a primer for that substrate, it goes on before the new bead, and a backing rod limits the depth to give the sealant room to work. If you have damp patches where an external joint has failed and frame sealant that has cracked, shrunk or pulled away, we can help, on external facade joints, kitchen worktops and splashbacks and window and door perimeters alike. For commercial sealant work in Bordon, you deal with one contact from quote to sign-off, whether it’s one building or several.
Quotes for commercial sealant in Bordon can come from photographs and a joint schedule, or from a walk-round, and the scope is set out in writing.
Small businesses near places like Bordon frequently occupy converted farm buildings. Those conversions put new frames and partitions against old brick, stone or timber, so each joint needs a product chosen for both surfaces.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Bordon (GU35)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Places near Bordon
Also in Bordon
Quoting for work in Bordon
What shapes the price:
- Travel to remote or island sites
- Backing rod, priming and other preparation
- Phasing around occupants
- The site’s rules and procedures
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
What to include in your enquiry
Diagnosis starts before we arrive. Tell us:
- Anything awkward about access or site hours
- Approximate linear metres or a joint schedule
- When you need the work done
- The asbestos register, for older buildings
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or email us to discuss it first.
Why act early in Bordon
Some low prices are low because nothing gets cut out. Sealing over looks tidy at handover, then lifts once the joint starts moving. Our prices always include removal of the failed bead and full joint preparation, which is where the lasting value is. For buildings in places like Bordon, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why clients in Bordon choose us
- One contact handling all your sites
- Matching to RAL references, product permitting
- Fully insured
- Clear, fixed quotes
See how commercial sealant jobs are priced and our accreditations and insurance.
Site staff or a sealant specialist?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Keeping the joints sound
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- On pre-2000 buildings, share the asbestos information before work starts
- Don’t let cleaning or traffic back on before the cure time is up
- Keep washroom and kitchen extraction working
- Ask cleaners to use a soft cloth and mild cleaner on sealant
Our workmanship on each job is backed by a 12-month guarantee. Keep the handover details with your O&M or maintenance records so it’s easy to find if a joint we sealed gives trouble inside the 12 months.
A failed external joint lets water in every time it rains. It can run into cavities, insulation and internal finishes long before anyone sees a stain. Resealing early keeps the problem in the sealant and out of the building.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Working on commercial sites near Bordon
Bordon has at least three named business or industrial parks inside a 3-mile radius. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints. Bordon sits in one of the drier corners of the country, the South East. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.
Offices and shops close to stations such as Liphook station (to the south-east of Bordon) tend to be busy all day, so sealant work is planned around opening hours. On estates like Woolmer Trading Estate (under half a mile south of Bordon), the office and welfare end of each unit has its own sealant to maintain. A business with units at Woolmer Trading Estate and Bordon Enterprise Park needn’t use two contractors for its sealant.
Bordon is about 10 miles south-west of Aldershot, in Hampshire. Looking for commercial sealant contractors in Bordon? We can help, as we do across Hampshire. 723 places across Hampshire fall within our area, Bordon among them. Our Portsmouth page has more on work in that area (23 miles or so).
Anyone looking for commercial sealant contractors in GU35 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are High Street, Station Road and Cobbett Square, and sites on any of them can send details for a fixed quote. Being close to the A325 and B3002, Bordon is straightforward for us to reach. Nearby places we also cover include Pinewood Village (1 mile north), Deadwater (1 mile east), Whitehill (1 mile south), Lindford (1 mile north-east) and Hollywater (1 mile south-east). A short drive away, we cover Basingstoke (15 miles north-west), Farnborough (13 miles north), Fleet (11 miles north), Aldershot (10 miles north-east), Alton (5 miles north-west) and Petersfield (8 miles south-west).
Landmarks near Bordon
Recent enquiries here include premises near Mill Chase Academy and the streets around them. For rail, the closest station is Liphook station, roughly 4.1 miles south-east. Other landmarks nearby include The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). Open spaces near Bordon include Selborne Hill and Deadwater Valley.
How a job runs
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work usually takes part of a day on a small job and longer where several buildings or phases are involved. For a job in Bordon, the main thing is a clear picture of the work, so send photos of each area. You will then get a fixed price for the work.
- We start with the evidence: photographs, drawings or a look on site.
- A fixed quote follows, with removal and preparation included.
- Sequence, access and working times are settled before the first joint is touched.
- Each joint is stripped, cleaned back to sound faces and primed where the maker specifies.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- We hand back each area with its cure time and our 12-month guarantee.
Getting the site ready
- Tell us your opening times and when work is allowed
- Point out any areas we must not close
- Point out parking and an unloading spot
Ask for a quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.