Floor Joint Sealing contractors in Balls Cross
Floor joint sealing and filling in warehouses, factories and industrial units in Balls Cross. CHAS accredited and fully insured, with a 12-month guarantee.
- Open saw cuts full of debris
- Old filler gone hard, cracked or loose
- Untidy open joints in a retail unit
Floor joint sealing for businesses in Balls Cross
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing in Balls Cross
Forklifts and pallet trucks are hard on open joints. Each crossing knocks the unsupported edge, and over time a neat cut turns into a ragged channel. A properly filled joint carries the wheel over and protects both arrises, which is kinder to trucks, loads and operators. We work on retail and showroom floors, forklift and pallet-truck routes and joints along racking aisles, and what we’re called in for most is unfilled floor joints collecting dirt and grit and cracked and crumbling joint fill. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Balls Cross is the same: the right product in a properly prepared joint.
Smaller community and commercial buildings around Balls Cross have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Balls Cross (GU28)
- Region
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions we’re asked in Balls Cross
Can you work at a site such as Colhook Industrial Park., by Balls Cross?
Yes. Our area takes in Balls Cross and its surroundings, with estates and business parks such as Colhook Industrial Park. Included. A few photographs and the unit address let us price the work.
Is Balls Cross off your patch?
Not at all. Balls Cross is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
What information helps you price floor joint sealing?
Use our quote form, or email photographs and a plan, with the traffic on each area. We then send a fixed quote with the product and phasing set out.
Do you guarantee industrial floor joints?
Our workmanship carries a 12-month guarantee, and we hold public liability insurance.
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
- Wide or random cracking that suggests a structural issue
- A floor that is out of level for the racking or trucks
If in doubt, call 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
What we seal
- Joints along racking aisles
- Retail and showroom floors
- Forklift and pallet-truck routes
- Loading bays
- Saw-cut induced joints
- Construction joints
Places near Balls Cross
Also in Balls Cross
Surface by surface
Construction joints
Day joints on busy routes are prone to edge damage. We look at how much they are moving before choosing the treatment.
Semi-rigid joint fillers
Semi-rigid fillers are designed to support joint edges under hard wheels. They tolerate little movement so timing matters on newer slabs.
Traffic, movement and joints around Balls Cross
Balls Cross sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in. At about 39 miles from central London, Balls Cross is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift.
Across sites such as Hampers Common Industrial Estate (2.5 miles south of Balls Cross), floor and movement joints can be sealed in phases so units keep working.
Balls Cross is about 12 miles west of Horsham, in West Sussex. Balls Cross sits inside our coverage and the rest of West Sussex, with the same fixed quotes and 12-month guarantee as everywhere else. Balls Cross is one of 373 places in West Sussex on our list. Brighton is covered too, around 24 miles from Balls Cross.
We cover the GU28 postcode districts for floor joints. Close to Balls Cross, our area also takes in Kirdford (2 miles east), Mackerel's Common (2 miles north-east), Plaistow (3 miles north-east), Ifold (4 miles north-east) and Wisborough Green (4 miles east). Bigger towns within reach include Horsham (12 miles east), Chichester (15 miles south-west), Littlehampton (15 miles south), Rustington (15 miles south), Storrington (10 miles south-east) and Billingshurst (6 miles east).
Local landmarks in Balls Cross
A little further out are Lodsworth Castle (4.7 miles south-west). The countryside around Balls Cross includes The Mens and Shillinglee Lake.
Do you need floor joint sealing in Balls Cross?
Left open, joints fill with grit, wrap and wood fragments. That debris is hard and levers at the edges as wheels pass, speeding up the damage.
Clients typically get in touch after noticing something like this:
- Scruffy, dirty joint lines on a shop or showroom floor
- Saw-cut joints left open and packed with grit
- Chipped and spalling edges along forklift routes
- Joint fill separating from the concrete
Estates like Colhook Industrial Park. (to the west of Balls Cross) combine warehouse slabs, yards and loading bays, all with joints under wheels.
Comparing quotes
- How long is the guarantee, and what does it include?
- Will RAMS and insurance details be available?
- Proof of insurance
- Will failed sealant be removed rather than covered?
Cost factors for floor joints
Before we quote, we look at:
- Backing rod, priming and other preparation
- How much existing material needs removing
- The total length or number of joints
- Working within restricted access windows
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- Approximate linear metres or a joint schedule
- The site address and postcode
- The type of building and who uses it
- Anything awkward about access or site hours
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or email the details over.
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Balls Cross are normally planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- We tell you when each zone can carry trucks again and move on to the next.
Preparing the site
- Tell us which areas need to stay in use
- Send your site hours and access windows
- Move anything stored against the joints
Request a quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.