Industrial and floor joint sealing in Aylesham, Kent
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Aylesham. Send photographs or drawings for a fixed quote.
- A gap opening alongside old joint filler
- Open saw cuts full of debris
- Sealant pulled out along a truck route
Floor joint sealing in Aylesham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Aylesham: questions and answers
Is Aylesham Industrial Estate, near Aylesham, within your area?
Yes. Our area takes in Aylesham and its surroundings, with estates and business parks such as Aylesham Industrial Estate included. To start, just call the office on 01277 525 020 or email us with the unit, the joints involved and your access times.
Can you take on a job at a hospital such as St Martins Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Can the warehouse stay open while you work?
The work is phased. We work aisle by aisle or zone by zone so the rest of the floor stays in use around the site hours and access windows you give us.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
Is the floor joint work guaranteed?
Every job has our 12-month guarantee. It covers our workmanship, not later slab movement or damage from impacts.
Is it normal for joint filler to separate?
Separation typically comes from slab shrinkage, poor preparation or the wrong product. We look at which it is before recommending anything.
How many days will you need on site?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
How we handle floor joint sealing in Aylesham
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. If you have cracked and crumbling joint fill and trucks and loads jolting over damaged joints, we can put it right. For commercial sealant work in Aylesham, you deal with one contact from quote to sign-off, whether it’s one building or several.
Rural business units around smaller places such as Aylesham often have new slabs laid inside older buildings. Saw-cut and construction joints in those floors need the right filler or sealant for the forklifts and trolleys that use them.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Place
- Aylesham (CT3)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Maintenance after handover
To get the most from the new sealant:
- Respect the cure time before traffic returns
- Allow for topping up joints as a new slab settles
- Start with the dock areas, where joints fail soonest
- Tell us about strong cleaning chemicals before we quote
A routine walk of the busiest aisles shows how the joints are holding up. Watch for filler pulling away from an edge, fresh chipping or grit collecting and keep photographs so changes are easy to compare.
A broken joint on a main route is crossed by every truck on that route. Sorting it early looks after your equipment as well as the slab.
Common problems we fix in Aylesham
Concrete slabs shrink as they dry out, and the saw cuts are there so it cracks in straight, controlled lines. Each panel pulls back as it shrinks and the joints open up so a filler put in early may separate along one side.
Any of the following is a good reason to get the joints checked over:
- A rough ride across broken joints
- Brittle joint filler breaking up
- Joint fill separating from the concrete
- Sealant pulled out along a truck route
Another example is CT3 Business Park (0.5 miles south-west of Aylesham), where floors and yards would be done in stages around the occupiers.
Comparing quotes
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
- Will CSCS-carded applicators be on site?
- Proof of insurance
Building owners, agents and FMs in Aylesham
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Different surfaces, different methods
Construction joints
Where a day joint crosses a truck route, its edges take heavy punishment. We look at how much they are moving before choosing the treatment.
Flexible floor sealants
Where joints move more, a flexible polyurethane floor sealant is often used. They give less edge support than semi-rigid fillers, so they suit lighter traffic or movement joints.
Places near Aylesham
What else we do in Aylesham
Our process
At the end of each section, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. Work in places the size of Aylesham is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- First, the zones and order of work are agreed with you.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Getting the site ready
- Tell us your opening times and when work is allowed
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email us.
Read more
Traffic, movement and joints around Aylesham
Aylesham has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
Large sites such as St Martins Hospital (5.2 miles north-west of Aylesham) have car parks, service roads and long elevations with movement joints in brick and panels. Schools like Aylesham Primary School often have long brick elevations with movement joints that age quietly.
Aylesham is about 6 miles south-east of Canterbury, in Kent. Anywhere in CT3, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 931 places across Kent fall within our area, Aylesham among them. London is covered too, some 59 miles away.
Postcode districts covered here: CT3 for floor joints. Buildings on Market Place, Mexborough Square and Derwent Way are within our area for floor joints. We also cover Bloodden (1 mile north), Adisham (1 mile north), Womenswold (1 mile south-west), Woolage Green (2 miles south) and Out Elmstead (2 miles south-west) for floor joints. Bigger towns within reach include Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (10 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
Near you in Aylesham
There’s a railway station in Aylesham itself: Aylesham station. Nearby you’ll also find St Martins Hospital (5.2 miles north-west).
How the quote is worked out
These are the things that shape the price:
- The total length or number of joints
- The site’s rules and procedures
- How accessible the joints are
- Joint width, depth and condition
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Where the site is, with the postcode
- The asbestos register, for older buildings
- A wide shot and a close-up of the area
- What the building is and how it’s used
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.