The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Coloured Sealant in Aylesham

Coloured and colour-matched sealant for visible joints across Aylesham, by CSCS-carded applicators. Fully insured and CHAS accredited.

  • Fit-outs with a sealant colour in the specification
  • A bead that fights the cladding or frame colour
  • Failed coloured sealant that has split or peeled
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
12-month guarantee on our workmanship.
South East, London & Scotland
Constructionline member
Fully insured: £5m PL

Coloured sealant for Aylesham sites

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Coloured sealant for commercial buildings in Aylesham

Stone, brick and cladding each bring their own colour challenge: a stone or brick facade shifts in tone from one area to the next. The aim is a sealant colour that sits comfortably against the whole surface. If you are dealing with old sealant that has yellowed, darkened or faded and smeared sealant on stone or joinery, we can help, on office fit-out finishes, cladding panels and natural stone and brick alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Aylesham, that means joint design, primers and backing rod as standard.

Small businesses near places like Aylesham frequently occupy converted farm buildings. Old masonry and timber meet new glazing and partitions in these buildings, and every junction needs a sealant that suits it.

Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.

The Mastic Doctor team beside their liveried vans in front of an office building
Location
Aylesham (CT3)
Region
Kent
Cover
A 12-month guarantee
Quotes
Quoted before any work starts
Call
01277 525 020
Page updated
3 November 2026

Common problems we fix in Aylesham

A coloured joint can fail like any other: it can crack, peel or harden with age and movement. We cut out and reseal in the agreed colour.

Most enquiries start with one or more of the following:

  • Failed coloured sealant that has split or peeled
  • Old sealant that has yellowed, darkened or faded
  • Hotel refurbishments with a set colour scheme
  • Previous reseals that don’t match the original

On estates like Aylesham Industrial Estate (0.5 miles south-west of Aylesham), the office and welfare end of each unit has its own sealant to maintain.

Questions to ask before you book

  • Is the sealant right for the movement and the substrate?
  • Are they CHAS accredited or on Constructionline?
  • Who will actually carry out the work
  • How the existing material will be dealt with

Choosing a commercial sealant contractor

Coloured sealant around Aylesham: how the place shapes the job

Aylesham lies roughly 59 miles out from central London. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings. Less than 3 miles from Aylesham there are at least three named estates and business parks. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints.

If you have premises on more than one site, say at Aylesham Industrial Estate and CT3 Business Park, one contractor and one quote can cover both. Premises within reach of Aylesham station (under half a mile east of Aylesham) often have busy frontages where joints are seen by everyone passing.

Aylesham is about 6 miles south-east of Canterbury, in Kent. Aylesham sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, including Aylesham. Sites around London have their own page, about 59 miles away.

Commercial sites across CT3 are covered for colour-matched joints. We cover commercial and managed buildings on Market Place, Mexborough Square and Derwent Way and the roads nearby. Close to Aylesham, our area also takes in Bloodden (1 mile north), Adisham (1 mile north), Womenswold (1 mile south-west), Woolage Green (2 miles south) and Out Elmstead (2 miles south-west). Nearby towns on our patch include Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (10 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).

Landmarks near Aylesham

Aylesham has its own railway station: Aylesham station. Nearby you’ll also find St Martins Hospital (5.2 miles north-west).

Map of Aylesham © OpenStreetMap contributors

Doing it in-house

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.

Aylesham: questions and answers

Can you work at a site such as Aylesham Industrial Estate, by Aylesham?

Yes. We cover Aylesham and the area around it, including industrial estates, business parks and retail parks such as Aylesham Industrial Estate. Photos and a short description are enough for a first look.

Can you supply sealant in our brand colour for a site in Aylesham?

Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.

Do you guarantee your work?

Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.

Are you fully insured?

Yes. We’re fully insured, and the certificate can go with your quote.

What do you charge?

Each job is quoted on its own details. To get one, call the office on 01277 525 020 or use the quote form with a description of the work.

Can you work while the building is occupied?

Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.

Do you take on small jobs?

We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.

Maintenance after handover

Keep the joints in good shape with a few simple steps:

  • Avoid piecemeal repairs on coloured joints
  • Ask contractors to check the colour before resealing
  • Standardise colours across a portfolio
  • Keep the area clear while the sealant cures

Colours can soften with light and weathering. That is normal for exposed sealant.

Settle the colour early in the project. When colour is left to the last minute, it is often wrong.

Our process

Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a site in Aylesham, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.

  1. We start with photographs, drawings or a visit to see the finishes.
  2. Colour options from the specified product’s range are shared with you.
  3. Tell us your site hours and access windows and we will plan around them.
  4. Joints are prepared, primed where specified and backed.
  5. We seal in the approved colour and tool it smooth.

Before we start on site

  • Make sure the joints can be reached
  • Arrange parking or a loading space
  • Tell us which areas need to stay in use

Getting a fixed quote

A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.

Get a quick quote

Read more

What sealant work can’t fix

Being straight saves everyone time. Fresh joints won’t solve:

  • Stopping sealant from ever changing colour outdoors
  • Cleaning or repairing the surrounding finishes
  • Paint over sealant on joints that move too much

If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we’ll say what we think.

Where we work in Aylesham

  • Hotel bathrooms and public areas
  • Powder-coated and anodised frames
  • Cladding panels
  • Natural stone and brick
  • Office fit-out finishes
  • Shop-fit joinery and counters

For managing agents and facilities managers

As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.

If you look after buildings for someone else, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.

Accreditations

Trusted. Accredited. Insured.