Expansion Joint Sealing in Aylesham
Expansion and movement joint sealing in walls, decks and floors in Aylesham and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- Leaks through car park deck joints onto the level below
- New sealant over old, now failing
- Joints packed with grit and debris
Expansion joint sealing near Aylesham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How a job runs
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If neighbouring businesses or buildings around Aylesham need work too, visits can be combined. Tell us your site hours and we’ll plan around them.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Getting the site ready
- Tell us which areas need to stay in use
- Send your site hours and access windows
- Let building users know which areas are affected
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Read more
Expansion joint sealing in Aylesham
Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it, and we’ll confirm the choice in the quote. We work on blockwork control joints, car park decks and ramps and cladding panel joints, and the failures we are asked to look at most are brittle, chalky sealant on external joints and new sealant over old, now failing. Whoever orders the work in Aylesham, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around Aylesham, most floor and movement joint jobs are single buildings or yards. Getting widths, depths and traffic details up front means one visit, not two.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Aylesham (CT3)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Aylesham
Also in Aylesham
When to call us in Aylesham
When a bead pulls away from one face, it has lost adhesion. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes, and it’s common on joints sealed in a hurry.
What tends to prompt an enquiry:
- Debris jammed in movement joints
- Sealant pulling off the joint face
- Arrises breaking up along floor joints
- Damp inside where a wall movement joint has failed
Sites like St Martins Hospital (5.2 miles north-west of Aylesham) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Comparing quotes
- What the guarantee covers, and for how long
- How they handle RAMS and site documents
- Their plan for phasing and protecting the area
- Their public liability cover
Expansion joint sealing around Aylesham: points for this area
Aylesham sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. At least three named trading, business or retail sites lie within about 3 miles of Aylesham. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
For an occupier at a site such as Aylesham Industrial Estate, 0.5 miles south-west of Aylesham, the joints at loading doors and dock levellers usually see the hardest wear. Schools such as Aylesham Primary School have movement joints in their walls and floors that are easy to overlook.
Aylesham is about 6 miles south-east of Canterbury, in Kent. Anywhere in CT3, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Aylesham is one of 931 places in Kent on our list. For work in that direction, see our London page.
Work on movement joints is covered throughout CT3, for business premises of every kind. For a building on Market Place, Mexborough Square and Derwent Way or nearby, we can quote for movement joints. Just outside Aylesham, we also work in Bloodden (1 mile north), Adisham (1 mile north), Womenswold (1 mile south-west), Woolage Green (2 miles south) and Out Elmstead (2 miles south-west). Nearby towns on our patch include Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (10 miles south), Ramsgate (12 miles north-east) and Broadstairs (14 miles north-east).
What’s near Aylesham
Aylesham has its own railway station: Aylesham station. A little further out are St Martins Hospital (5.2 miles north-west).
How the quote is worked out
Before we quote, we look at:
- Induction, permit and paperwork requirements
- Backing rod, priming and other preparation
- Phasing around occupants
- The product specified
Pricing movement joints depends on how many there are, their condition and the access. Call for a quote.
Details that help us quote
To price the job accurately, we need to understand the site. Useful things to include:
- Drawings or a marked-up plan, if available
- Anything awkward about access or site hours
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or send photos by email.
What happens if it’s left?
Closing a car park for a reseal is rarely an option. Work can be planned so parts of the deck stay open, compared with a full closure. Tell us what has to stay open and we’ll plan around it. Over time, UV, weather and movement wear any sealant out. Renewing it in good time keeps the building weathertight.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we will explain how it’s made up.
What you get with us
- 12-month guarantee on workmanship
- Coloured sealants to suit the setting, where available
- Fully insured, including public liability cover
- A fixed quote before work starts
General trades versus a specialist
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Changing the joint layout or spacing of a structure
- Broken or spalled joint edges, which need repairing before any sealant goes in
If you’re not sure, just call the office on 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Joints and surfaces we work on
- Blockwork control joints
- Brickwork movement joints
- Precast concrete panel joints
- Car park decks and ramps
- Podiums and floor movement joints
- Cladding panel joints
FAQs: Aylesham
Is a hospital such as St Martins Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Aylesham too small for you to travel to?
No. Small places get the same service as large ones. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work to our specification?
Yes. Send it with your enquiry, and we’ll price the work to it, flagging anything that needs clarifying.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.