Arisaig floor joint sealing
Work needed on a floor joint in Arisaig? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Old filler gone hard, cracked or loose
- Flexible sealant torn out by wheels
- Unfilled floor joints collecting dirt and grit
Need floor joint sealing in Arisaig?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle floor joint sealing in Arisaig
We diagnose the floor first rather than guessing at a product: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. From that we choose between a semi-rigid filler and a more flexible sealant and the answer can differ from one zone to the next. If you are dealing with scruffy, dirty joint lines on a shop or showroom floor and failing joints at loading bays and dock doors, we can put it right. Searching for sealant specialists in Arisaig? We’ve been sealing commercial buildings since 2005.
For outside joints near Arisaig, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Inside slabs aren’t affected and can be scheduled around the occupier.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Arisaig (PH39)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Surface by surface
Flexible floor sealants
Polyurethane sealants suit floor joints with larger movement. They give less edge support than semi-rigid fillers, so they suit lighter traffic or movement joints.
Semi-rigid joint fillers
If a joint is still opening, a semi-rigid filler may part from one face. That is normally dealt with by topping up later, and we will explain it when we quote.
More services for Arisaig
Why act early in Arisaig
Every jolt over a broken joint passes into the truck, the load and the driver. That means extra wear on wheels and a rougher ride for staff, which nobody budgets for. A filled joint takes most of that out. Around smaller places like Arisaig, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote when you’re ready.
Why us?
- One contact handling all your sites
- 12-month guarantee on workmanship
- Clear, fixed quotes
- Work to your specification and the manufacturer’s guidance
Read what affects the cost and our accreditations.
Floors, slabs and movement joints in Arisaig
Arisaig lies within about 1 mile of the sea. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so a failed joint lets more in and the edges break up sooner. Being in the west of Scotland, Arisaig gets more rain than eastern areas. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. External sealing is booked for dry spells, with some give in the dates.
Once a joint near Arisaig opens up, grit and water get in and the edges start to break. In and around Arisaig, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Arisaig (Gaelic: Àrasaig) is in Highland. Businesses, contractors and managing agents in Arisaig use us for work on floor joints, as part of our coverage of Highland. Our Highland coverage takes in 256 places, from busy centres to rural villages.
Work on floor joints is covered throughout PH39, for business premises of every kind. Streets here include Station Road, Creag Mhor Gardens and Canon Gillies, and sites on any of them can send details for a fixed quote. We also cover Glenancross (3 miles north), Morar (4 miles north), Mallaig (7 miles north), Ardvasar (10 miles north) and Armadale (11 miles north). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Near you in Arisaig
There’s a railway station in Arisaig itself: Arisaig station. Other landmarks nearby include Land (less than half a mile south). Open spaces near Arisaig include Loch nan Eala.
Looking after the joints
A few simple habits keep the new joints working:
- Treat loading bay joints first if they’re failing
- Respect the cure time before traffic returns
- Make joint checks part of your floor inspections
- Sweep debris out of open joints until they can be filled
Normal floor cleaning is fine once the product has cured. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it and that takes longer and closes areas for longer.
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Questions we are asked in Arisaig
Is Arisaig too far out for you?
Not at all. Arisaig is within our area. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Will our site in Arisaig have to close for joint sealing?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Do you use semi-rigid filler or flexible sealant on floor joints?
We decide joint by joint. Hard wheels need edge support, which points to a semi-rigid filler, and movement joints or perimeters need something flexible. You’ll see the choice for each area in the quote.
Do you repair broken joint edges?
A filler needs sound edges to grip. We’ll tell you if the joint edges need repairing first, so you can decide how to proceed.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We will confirm the colours available for the specified product.
Why has the filler pulled away from one side?
On newer slabs, the concrete keeps shrinking after the joints are filled, so a semi-rigid filler can part from one face. It is typically dealt with by topping up.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Travel to smaller Scottish places like Arisaig is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Flag any permit to work we’ll need
- Point out parking and an unloading spot
- Confirm the product named in the specification
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or call 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Related advice
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Which sealant the job calls for
- Distance, for remote addresses
- How much there is to seal
- How much existing material needs removing
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- What the building is and how it’s used
- Rough lengths or quantities, or drawings if you have them
- Where the site is, with the postcode
- The asbestos register, for older buildings
To get a fixed quote, ring 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.