Fire-rated sealing and fire stopping in Wormley, Surrey
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Wormley and the surrounding area. Send details for a fixed quote.
- Fire-stopping items raised at inspection or handover
- Open linear gaps along the top of fire-resisting walls
- Fire sealant pulled out of the opening
Fire stopping in Wormley
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Wormley
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. If you’re dealing with fire seals cut back for extra cables and never reinstated and non-fire-rated filler around services, we can help, whatever the surface. Looking for mastic applicators who cover Wormley? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Barn and farm-building conversions near places like Wormley often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Wormley (GU8)
- Region
- Surrey
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Surface by surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest against the detail’s limits.
Metal pipes
Heat travels along metal pipework. If the detail needs something beyond sealant, we tell you.
Our process
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. If others near Wormley need work, visits can be combined. A fixed quote is given before anything starts.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Getting the site ready
- Send any specification or drawings in advance
- Send your site hours and access windows
- Point out parking and an unloading spot
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email the details over.
Advice
Should maintenance staff do it?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
When something else is needed
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Reviewing a building’s overall fire safety
- Signing off or certifying a building’s fire stopping
- Writing the fire-stopping specification
If in doubt, call 01277 525 020 or send details through our quote form and we’ll say what we think.
Where we work in Wormley
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Pipe penetrations
Towns and villages near Wormley
Also in Wormley
Fire stopping around Wormley: points for this area
Fire stopping of openings and penetrations in England falls under Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Wormley is about 35 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal.
In a hotel such as The White Hart Hotel (0.9 miles north of Wormley), new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. In a building such as Church of All Saints, any service penetration through a fire-resisting wall should be sealed to the specified detail. Schools such as King Edward's School Witley often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Wormley is about 8 miles south of Guildford, in Surrey. We cover Wormley, with the same fixed quotes and 12-month guarantee as everywhere else. Our Surrey coverage takes in 379 places, large and small. For work in that direction, see our Reading page, about 26 miles away.
Work on service penetrations is covered throughout GU8, for business premises of every kind. For a building on Petworth Road, Robin Way and Brook Road or nearby, send details and we’ll quote for service penetrations. Close to Wormley, our area also takes in Sandhills (1 mile west), Hambledon (1 mile east), Brook (1 mile west), Witley (1 mile north) and Chiddingfold (2 miles south). A short drive away, we cover Guildford (8 miles north), Woking (13 miles north), Camberley (14 miles north), Farnham (8 miles north-west), Dorking (15 miles north-east) and Frimley (13 miles north).
Local landmarks in Wormley
Recent enquiries here include premises near Rodborough and Witley CofE Controlled Infant School, among other places. Wormley has its own railway station: Witley station. A little further out are Godalming Museum (3.7 miles north) and Milford Hospital (2.3 miles north). The countryside around Wormley includes Hydon's Ball and Farncombe Wood.
Cost factors for service penetrations
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- Distance, for remote addresses
- How accessible the joints are
- The total length or number of joints
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
To price the job accurately, we need to understand the site. Send us:
- What the building is and how it’s used
- The postcode of the building
- When you need the work done
- How the joints are reached, and at what height
For a fixed quote, phone 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
FAQs: Wormley
Can you take on a job at a hospital such as Milford Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Wormley too small for you to travel to?
No. Places such as Wormley are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Can the sealant be colour-matched?
That depends on the product. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
How much does the work cost?
Each job is quoted on its own details. To get one, speak to us on 01277 525 020 or use the quote form.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How do I request a quote?
The quote form is the simplest route, though you can also phone 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- Look above ceilings when tiles are lifted for other jobs
- Leave fire sealant to cure fully before covering it
- Settle who seals which penetrations at the start of a project
- Brief every trade that openings they make must be sealed
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.