Fire stopping in Woll
Commercial sealant work in Woll for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Hidden openings found during inspections
- Seals disturbed by maintenance and left open
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for Woll sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Quoting for work in Woll
Each job is priced on its own details. The things that drive the figure:
- Induction, permit and paperwork requirements
- Joint width, depth and condition
- Specialist products, such as fire-rated or hygienic sealants
- Location, for remote and island sites
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What to include in your enquiry
We can often quote from photos and a few details. Please tell us:
- Any specification or named product
- Asbestos survey details if the building is older
- Where the site is, with the postcode
- Anything awkward about access or site hours
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, ring 01277 525 020 or email a schedule or drawings.
Fire stopping in Woll
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you have seals disturbed by maintenance and left open and openings left by services added after handover, we can put it right, on service gaps in risers, cable penetrations and linear gaps at wall heads alike. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Woll is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a building near Woll, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photographs of the openings, with sizes if you have them.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Woll (TD7)
- Region
- Scottish Borders
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Leave it or put it right?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Woll, a repair visit takes planning, so it’s better to act early.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why clients in Woll choose us
- Failed material removed, not covered up
- Clear, fixed quotes
- Commercial sealant work since 2005
- CHAS accredited contractor
Do you need fire stopping in Woll?
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Common reasons buildings call us in:
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
- Seals disturbed by maintenance and left open
- Non-fire-rated filler around services
Older community buildings such as Ashkirk Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
What to look for in a quote
- Their approach to joint depth and backing
- How the existing material will be dealt with
- Their plan for phasing and protecting the area
- How they handle RAMS and site documents
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. For work around Woll, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Warn occupants and staff about the work
- Confirm the product named in the specification
- Tell us what induction or permit system the site runs
Request a quote
For a fixed quote, call 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
Also near Woll
What else we do in Woll
Woll: questions and answers
Is Woll off your patch?
Not at all: smaller places are covered as well as towns. Our area covers all of Scotland, cities, towns and islands alike. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
How do the Scottish rules apply to fire-rated sealing in Woll?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Owners, agents and contractors
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
Fire stopping around Woll: points for this area
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
For a hotel such as Woll Golf Course & Restaurant Hotel (less than half a mile south of Woll), penetration seals are worth checking after any refit or services upgrade. Wherever services are added at a hospital such as Hawick Community Hospital, 5 miles south-east of Woll, the compartment line has to be made good with the specified product.
Woll is about 4 miles south of Selkirk, in the Scottish Borders. We cover Woll, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 91 places in the Scottish Borders, from busy centres to rural villages. We also cover Edinburgh, around 34 miles from Woll.
Commercial sites across TD7 are covered for service penetrations. We also cover Ashkirk (1 mile north-east), Selkirk (4 miles north), Stirches (4 miles south-east), Lilliesleaf (4 miles north-east) and Burnfoot (5 miles south-east) for service penetrations. Bigger towns within reach include Galashiels (9 miles north), Hawick (5 miles south-east), Jedburgh (12 miles east), Wilton (5 miles south-east), Innerleithen (12 miles north-west) and Melrose (9 miles north-east).
Landmarks near Woll
Other landmarks nearby include Peel Hill (3.7 miles north) and Hawick Community Hospital (5 miles south-east). Green spaces nearby include Headshaw Loch and Hare and Dunhog Mosses.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Walls or floors that aren’t fire-resisting to begin with
- Deciding what a wall or floor needs, which belongs to the designer
- Signing off or certifying a building’s fire stopping
If you are not sure, just phone 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Where we work in Woll
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers