Fire Stopping in Wainscott
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Wainscott. Send photos or drawings for a fixed quote.
- Snag lists that include open service penetrations
- Seals disturbed by maintenance and left open
- Improvised or mixed-product fire seals
Fire stopping across Wainscott
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Wainscott
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. If you have builders’ foam or ordinary silicone in compartment walls and unsealed openings around new pipes and cables, we can help, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Wainscott, preparation and product choice get the time they need.
In places the size of Wainscott, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Wainscott (ME2, ME3)
- Region
- Medway
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail, and we won’t substitute it for a specified collar.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed, and we work within it.
Diagnose, treat, sign off
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. For a job in Wainscott, the main thing is a clear picture of the work, so send photos of each area. A fixed quote follows.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
- Move anything stored against the joints
Getting a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email drawings and photos.
Read more
FAQs: Wainscott
Can work at a site such as University of Kent - Medway Campus fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Can you take on a job at a hospital such as Medway Maritime Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Do you hold third-party fire-stopping installer certification?
No, and we won’t imply otherwise. Third-party schemes aren’t a legal requirement, but many clients and main contractors ask for them. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Can you fire stop behind the services contractors?
Yes, provided a specification covers them. Openings left by new services are among the most common jobs we see, and we reseal them to the specified detail.
Is the BS 476 change in 2029 relevant to fire stopping?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
Can you quote from photographs?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
How many days will you need on site?
That varies with the scale of the job, though a typical visit normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.
What we’re called out for in Wainscott
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Common reasons buildings call us in:
- Snag lists that include open service penetrations
- Openings found when ceilings come down for a refit
- Builders’ foam or ordinary silicone in compartment walls
- Open linear gaps along the top of fire-resisting walls
Campus buildings at universities such as University of Kent - Medway Campus (1.5 miles south-east of Wainscott) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified.
What your quote should include
- What level of public liability insurance do they hold?
- Will RAMS and insurance details be available?
- How long is the guarantee, and what does it include?
- Whether old or failed sealant will be cut out, not overlaid
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Redoing a failed joint usually costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Places near Wainscott
Other services in Wainscott
What happens if it’s left?
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product. In a smaller place such as Wainscott, getting a contractor back for a second visit takes time, so we’d suggest renewing all the joints that are going, not just the worst.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Why appoint us
- Specification-led, product-correct work
- Fully insured, including public liability cover
- CSCS-carded applicators
- Constructionline member
Take a look at our cost guide and how we’re accredited.
Fire-rated sealing for Wainscott buildings
The area within 2 miles of Wainscott holds a good number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a site team at a college like MidKent College Gillingham Campus, 1.8 miles south-east of Wainscott, fire-rated sealing is best scheduled after the summer works. On a hospital site such as Medway Maritime Hospital, which lies south-east of Wainscott, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Wainscott is about 2 miles north of Rochester, in Medway. If you are looking for fire stopping in Wainscott, we can help. Across Medway, 54 places are covered, including Wainscott. Sites around London have their own page, about 27 miles away.
Business premises anywhere in ME2 and ME3 are within our area. We cover commercial and managed buildings on Hoo Road, Holly Road and Leigh Road and the roads nearby. If your building is just outside Wainscott, we cover Upper Upnor (1 mile south-east), Lower Upnor (1 mile east), Chattenden (1 mile north-east), Cooling Street (2 miles north) and Hoo St Werburgh (2 miles north-east). Bigger towns within reach include Gillingham (4 miles south-east), Chatham (4 miles south), Rainham (5 miles south-east), Luton (3 miles south), Park Wood (6 miles south-east) and Lordswood (5 miles south).
Near you in Wainscott
Locally, jobs take us to sites close to Temple School, Broomhill Park and The Hundred of Hoo Academy. Nearby too are Royal Oak pub (0.6 miles south-west) and Former Ordnance Store At Chatham Gun Wharf (1.8 miles south). Wainscott’s nearest station is Strood station, roughly 1.1 miles south-west of the centre. Other landmarks nearby include Upnor Castle (0.7 miles south-east) and Huguenot Museum (1.6 miles south). For a walk, there’s Rede Common and Gad's Hill.
After the work
Regular inspection catches problems early. Specifically:
- Agree the fire-stopping specification before services go in
- File the specified details where the next contractor can find them
- Ask which product is in place before decorating
- Flag new cables with no seal around them
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.