Uig fire stopping
Sealant work in Uig for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire seals cut back for extra cables and never reinstated
- Improvised or mixed-product fire seals
- Hidden openings found during inspections
Fire stopping for businesses in Uig
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Compartment walls and floors in Uig
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Older community buildings such as Church of Scotland that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hotels like Uig Hotel, 0.5 miles to the south-east of Uig, are refurbished in phases, and each phase can open up compartment walls.
Uig is in Highland. Commercial clients in Uig use us for work on service penetrations. 256 places across Highland fall within our area, Uig among them.
Commercial sites across IV51 are covered. Buildings on Park Terrace, Rha Bank and Corbett Terrace are within our area for service penetrations. Just outside Uig, we also work in Staffin (6 miles east), Clachamish (7 miles south), Kilmaluag (7 miles north-east), An t-Aodann Ban (9 miles south) and Kilmuir (13 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you phone 01277 525 020 or email a schedule or drawings.
Local landmarks in Uig
The countryside around Uig includes Beinn Mheadhonach and Loch Mòr.
How we handle fire stopping in Uig
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. If you’re dealing with unsealed joints where partitions meet the slab and openings left by services added after handover, we can help, on cable penetrations, linear gaps at wall heads and service gaps in risers alike. Whether you call it commercial sealant work, mastic application or joint sealing, in Uig it comes down to the same thing: the right product in a properly prepared joint.
For a building near Uig, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Uig (IV51)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Common questions from Uig clients
What do Scotland’s building standards say about service penetrations in Uig?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Is Uig too far out for you?
No. Places such as Uig are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Good photos up front let us bring everything on the first visit.
What about RAMS and site documents?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we will confirm them with the quote.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Can you work while the building is occupied?
In the majority of cases, yes. We phase the work so most of the building stays in use.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building near Uig, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Share your working hours and any access restrictions
- Agree which areas must stay open
- Tell us what induction or permit system the site runs
Ask for a quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, give us a call on 01277 525 020 or send photos by email.
Related advice
Places near Uig
What else we do in Uig
Surface by surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range, and any outside it are raised with you.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough.
What affects the price in Uig
What shapes the price:
- Removal of failed or old sealant
- Quantities, in metres or numbers
- Specialist products, such as fire-rated or hygienic sealants
- Phasing around occupants
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Details that help us quote
We can often quote from photos and a few details. It helps to include:
- Approximate linear metres or a joint schedule
- A wide shot and a close-up of the area
- Anything awkward about access or site hours
- The product your specification calls for
For a fixed quote, speak to us on 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. You can also send details through our quote form.
When to call us in Uig
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe and the opening isn’t always resealed.
Things that normally lead to an enquiry:
- Fire-rated sealant that has cracked or shrunk back
- Builders’ foam or ordinary silicone in compartment walls
- Damaged fire seals in risers and voids
- Improvised or mixed-product fire seals
Schools such as Uig Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- Proof of insurance
- Will failed sealant be removed rather than covered?
- The named product and why it was chosen
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Why it’s worth doing now in Uig
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Uig before they leak.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Why choose Mastic Doctor in Uig
- A Constructionline member, so easy to vet
- One phone line for London, the South East and Scotland
- A fixed quote before work starts
- CSCS-carded applicators
Take a look at what affects the cost or how we’re accredited.