Fire Stopping in Tudeley
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Tudeley and the surrounding area. Send photos or drawings for a fixed quote.
- Unsealed joints where partitions meet the slab
- Penetration schedules that need working through
- Fire seals cut back for extra cables and never reinstated
Fire stopping across Tudeley
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Maintenance after handover
To get the most from the new sealant:
- Agree the fire-stopping specification before services go in
- Get seals inspected before ceilings and boxing close
- File the specified details where the next contractor can find them
- Look above ceilings when tiles are lifted for other jobs
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open instead of being left for someone else.
Fire stopping for commercial buildings in Tudeley
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow. We work on linear gaps at wall heads, pipe penetrations and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are penetration schedules that need working through and open linear gaps along the top of fire-resisting walls. For commercial sealant work in Tudeley, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Rural conversions around Tudeley can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Every job we finish is backed by a 12-month workmanship guarantee, in Tudeley as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Tudeley (TN11)
- Region
- Kent
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter.
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Places near Tudeley
Also in Tudeley
Service penetrations in Tudeley buildings
A 2-mile radius around Tudeley takes in several hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
Hospital estates such as Tonbridge Cottage Hospital (to the west of Tudeley) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. Halls and meeting rooms at places like Church of All Saints sometimes gain new services, and any compartment wall crossed needs the specified seal. Colleges such as West Kent College (to the west of Tudeley) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Tudeley is about 2 miles south-east of Tonbridge, in Kent. We cover Tudeley, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, including Tudeley. For work in that direction, see our London page (28 miles or so).
Commercial sites across TN11 are covered. If your building is just outside Tudeley, we cover Tudeley Hale (1 mile north-east), Crockhurst Street (1 mile south-east), Capel (1 mile south-east), Five Oak Green (2 miles east) and Colt's Hill (2 miles south-east). Bigger towns within reach include Maidstone (11 miles north-east), Sevenoaks (9 miles north-west), Royal Tunbridge Wells (4 miles south-west), Kings Hill (7 miles north-east), Foley Park (11 miles north-east) and Paddock Wood (3 miles east).
What’s near Tudeley
Locally, jobs take us to sites close to Bishop Chavasse Primary School, Hillview School for Girls and The Poacher & Partridge pub, among other places. The nearest railway station is Tonbridge station, roughly 2 miles west. Other landmarks nearby include Tonbridge Castle (1.9 miles west) and The Milne Museum (2 miles north-west). The countryside around Tudeley includes Barden Lake and Tudeley Woods RSPB reserve.
Common questions from Tudeley clients
Do you cover business parks and estates near Tudeley, such as Kingstanding Business Park?
Yes. Our area takes in Tudeley and its surroundings, with estates and business parks such as Kingstanding Business Park included. Send details of the unit and the work through our quote form for a quick quote.
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Tudeley?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
How do we ask for a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Work for main contractors and building owners
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Leave it or put it right?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is usually a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Around Tudeley, it’s better to renew all the failing joints at once. Send photos of each area and we’ll quote for the lot.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why us?
- Specification-led, product-correct work
- 12 months’ guarantee on every job
- Over 20 years of commercial sealing
- Clear, fixed quotes
What we can’t put right
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Gaps in walls that were never built as compartment walls
- Fire risk assessments, a job for a competent assessor
- Openings that need collars, wraps, batts or boards rather than sealant
Not sure which it is? You can give us a call on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Where we work in Tudeley
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
From enquiry to sign-off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. For work around Tudeley, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Preparing the site
- Send any specification or drawings in advance
- Move anything stored against the joints
- Tell us your opening times and when work is allowed
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.