Fire stopping in Tudeley Hale
Fire stopping for Tudeley Hale, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Open linear gaps along the top of fire-resisting walls
- Fire sealant pulled out of the opening
- Service penetrations left open after M&E works
Fire stopping in Tudeley Hale
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself typically taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Rural sites near Tudeley Hale may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Share the asbestos register for older buildings
- Tell us which areas need to stay in use
- Point out parking and an unloading spot
Get a fixed quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, phone 01277 525 020 or use the quote form.
Related advice
Fire stopping in Tudeley Hale, done properly
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, phone 01277 525 020 or email us with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. The enquiries we see most involve service penetrations left open after M&E works and openings found when ceilings come down for a refit, across service gaps in risers, pipe penetrations and cable penetrations. Looking for mastic applicators who cover Tudeley Hale? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
For a smaller site near Tudeley Hale, we plan to do all the penetrations in one go, so send the specification and photos first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Tudeley Hale (TN11)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance, including keys, permits and any isolations.
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail, and we won’t substitute it for a specified collar.
Questions we’re asked in Tudeley Hale
Can you seal penetrations in a hotel in Tudeley Hale after a refit?
Yes. We install fire-rated and intumescent sealant where it is specified. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
Does your area include sites such as Kingstanding Business Park, near Tudeley Hale?
Yes. We cover Tudeley Hale and the area around it, including industrial estates, business parks and retail parks such as Kingstanding Business Park. Send details of the unit and the work through our quote form for a quick quote.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Which sealant will you use?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Is your workmanship covered by a guarantee?
Yes. Workmanship is guaranteed for 12 months on every job.
Cost factors for service penetrations
Each job is priced on its own details. The main factors are:
- The size and state of each joint
- Distance, for remote addresses
- Which sealant the job calls for
- How much there is to seal
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
Good information means a firmer quote. When you get in touch, include:
- Any dates the work must fit around
- Approximate linear metres or a joint schedule
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Places near Tudeley Hale
Other services in Tudeley Hale
Doing it in-house
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Service penetrations in Tudeley Hale buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. There are a number of hotels within about 2 miles of Tudeley Hale. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Workshops and IT rooms at colleges like Hadlow College, 2.3 miles north of Tudeley Hale, are re-serviced often, leaving penetrations to seal. Wherever services are added at a hospital such as Tonbridge Cottage Hospital, 2 miles to the south-west of Tudeley Hale, the compartment line has to be made good with the specified product.
Tudeley Hale is about 2 miles east of Tonbridge, in Kent. Any commercial site in Tudeley Hale is covered. Across Kent, 931 places are covered, including Tudeley Hale. There’s a separate page for London, about 28 miles away.
We cover the TN11 postcode districts. Just outside Tudeley Hale, we also work in Tudeley (1 mile south-west), Crockhurst Street (1 mile south), Capel (2 miles south-east), Five Oak Green (2 miles east) and Colt's Hill (2 miles south-east). Further afield, our area takes in Maidstone (10 miles north-east), Sevenoaks (8 miles north-west), Royal Tunbridge Wells (4 miles south-west), Kings Hill (7 miles north-east), Foley Park (11 miles north-east) and Paddock Wood (3 miles east).
Near you in Tudeley Hale
In Tudeley Hale, that means premises near Hillview School for Girls and The Poacher & Partridge pub and the streets around them. The nearest railway station is Tonbridge station, roughly 2.2 miles west. Well-known places in the area include The Milne Museum (2.1 miles west) and Tonbridge Castle (2 miles west). For a walk, there’s Barden Lake and Tudeley Woods RSPB reserve.
When it isn’t the sealant
We check first that sealant really is the fix. It isn’t the answer for:
- Approving the work on behalf of building control
- Large openings beyond what any sealant detail covers
- Gaps in walls that were never built as compartment walls
If you are not sure, just phone 01277 525 020 or send photos by email and we’ll give you a straight answer.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
Common problems we fix in Tudeley Hale
Some seals fail because the wrong product went in: builders’ foam or ordinary silicone used to fill a hole. It may look closed, but it has no tested fire performance in that position, so it has to come out.
It’s worth sending us details if you spot any of the following:
- Fire seals cut back for extra cables and never reinstated
- Openings left by services added after handover
- Expanding foam used as fire stopping
- Fire sealant pulled out of the opening
Office fit-outs on sites such as Kingstanding Business Park, 2.4 miles to the south-west of Tudeley Hale, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Questions to ask before you book
- What the guarantee covers, and for how long
- Health and safety accreditation such as CHAS
- How they handle RAMS and site documents
- How joint depth will be controlled