Fire-rated sealing and fire stopping in Throwley, Kent
Looking for fire stopping in Throwley? It’s simple: send details, get a quote, we seal, guaranteed.
- Non-fire-rated filler around services
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
Fire stopping near Throwley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Throwley
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. We work on cable penetrations, service gaps in risers and linear gaps at wall heads, and the failures we are asked to look at most are openings left by services added after handover and fire-stopping items raised at inspection or handover. Most enquiries from Throwley start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Barn and farm-building conversions near places like Throwley often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Place
- Throwley (ME13)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. It won’t fix:
- Plastic pipes whose detail calls for a collar or wrap
- Fire risk assessments, a job for a competent assessor
- Issuing fire ratings or certificates for seals
If you are not sure, just phone 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
What we seal
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
Diagnose, treat, sign off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Jobs in and around smaller places like Throwley are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Confirm the product named in the specification
- Send asbestos survey details if the building is pre-2000
- Tell staff and tenants when we will be in
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or send details through our quote form.
Advice
How the job changes by surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically.
Service penetrations in Throwley buildings
Throwley lies roughly 44 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
Halls and meeting rooms at places like Church of St Michael and All Angels sometimes gain new services, and any compartment wall crossed needs the specified seal. Buildings near Throwley get the fire-rated product that’s specified, installed to its tested detail.
Throwley is about 4 miles south of Faversham, in Kent. Businesses, contractors and managing agents in Throwley can call on us for service penetrations, as part of our coverage of Kent. Across Kent, 931 places are covered, including Throwley. For work in that direction, see our London page, about 44 miles away.
Business premises anywhere in ME13 are within our area. We also cover Throwley Forstal (1 mile south), Sheldwich (1 mile north-east), Badlesmere (1 mile east), Sheldwich Lees (1 mile east) and Eastling (2 miles north-west) for service penetrations. Bigger towns within reach include Maidstone (14 miles west), Ashford (9 miles south), Canterbury (10 miles east), Sittingbourne (7 miles north-west), Whitstable (10 miles north-east) and Faversham (4 miles north).
What’s near Throwley
The nearest railway station is Faversham station, roughly 3.6 miles north-east. Well-known places in the area include Newnham Castle (2.7 miles north-west).
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Throwley can sit alongside others in a wider programme across Kent.
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first.
Questions we’re asked in Throwley
Do you decide the fire-stopping details for buildings in Throwley?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Is Throwley too far out for you?
No. Places such as Throwley are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we’ll confirm the curing time on the day.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Places near Throwley
What else we do in Throwley
Why deal with it now?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Around Throwley, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
What you get with us
- 12 months’ guarantee on every job
- Over 20 years of commercial sealing
- Fully insured, including public liability cover
- One number for every site we cover
Take a look at what affects the cost or how we’re accredited.
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Include service cupboards in routine inspections
- Keep general-purpose fillers away from compartment walls
- Have penetrations checked while they can still be seen
- Make fire stopping part of every scope that crosses a fire-resisting wall
Don’t patch a fire-rated seal with anything outside its tested detail. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.