
Commercial washroom and wet-area sealing in Throwley, Kent
Work needed on a washroom in Throwley? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Sealant laid over old silicone and now peeling
- Complaints from staff, guests or users about tired washrooms
- Open joints along basins and vanity units
Need washroom sealing in Throwley?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Washroom sealing in Throwley, done properly
From one staff toilet in Throwley to washrooms across a whole estate, we work the same way: send details, get a fixed quote, we seal, guaranteed. A few photos and a count of fittings are enough for a quick quote, or we can arrange a visit. If you are dealing with shower tray joints that have opened up and gaps where vanity tops meet the wall, we can put it right, whatever the surface. A single leaking joint is often how a building in Throwley first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Community buildings around smaller places like Throwley have kitchens and toilets used by many people. Fresh anti-mould sanitary silicone at sinks, worktops and toilets keeps them cleanable.
A 12-month guarantee applies to all our work in Kent. If an installation problem shows up, call the office on 01277 525 020 or send photos by email and we’ll arrange a return visit.
- Location
- Throwley (ME13)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026

Sanitary sealant for Throwley buildings
Central London is about 44 miles from Throwley, within the office belt around the capital. Office toilets in the commuter belt are in use from first arrivals to last departures, and resealing in phases keeps facilities available.
Around Throwley, washroom joints are resealed by removing the old silicone completely and laying anti-mould sanitary silicone on dry surfaces. Church halls and community buildings, such as those at Church of St Michael and All Angels, have kitchens and toilets used by many groups, and their sanitary sealant works hard.
Throwley is about 4 miles south of Faversham, in Kent. Our applicators travel to Throwley for work on washrooms and wet areas. We work across 931 places in Kent, from busy centres to rural villages. We also cover London, some 44 miles away.
Postcode districts covered here: ME13. Close to Throwley, our area also takes in Throwley Forstal (1 mile south), Sheldwich (1 mile north-east), Badlesmere (1 mile east), Sheldwich Lees (1 mile east) and Eastling (2 miles north-west). A short drive away, we cover Maidstone (14 miles west), Ashford (9 miles south), Canterbury (10 miles east), Sittingbourne (7 miles north-west), Whitstable (10 miles north-east) and Faversham (4 miles north).
Around Throwley
For rail, the closest station is Faversham station, about 3.6 miles north-east of the centre. A little further out are Newnham Castle (2.7 miles north-west).
Why act early in Throwley
Waiting for a holiday closure can leave failing joints in place for a long time. With phasing, the work can go ahead while most facilities stay open. Older rural buildings around Throwley move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why us?
- A range of standard colours, depending on the product
- One phone line for London, the South East and Scotland
- Colour agreed before work starts
- A Constructionline member, so easy to vet
See how commercial sealant jobs are priced or how we’re accredited.
How the job changes by surface
Kitchens and tea points
Worktop, sink and splashback joints in tea points take water and food. Sealed joints leave no gaps for food and dirt.
Wet-room floors and floor-to-wall joints
We seal the visible joints; we don’t install or repair waterproofing below and point it out if water appears to rise from below.
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For work around Throwley, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- First, the phasing is agreed so facilities stay open.
- Leaks, loose panels or damp are pointed out first.
- Failed sealant and residue are stripped out.
- We reseal with the grade suited to each area.
- We confirm reopening times for each washroom.
Preparing the site
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
To get a fixed quote, speak to us on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Tell us about infection-control or permit rules before we quote
- Brief cleaning staff to treat joints gently
- Don’t leave an open joint at a basin or tray
- Inspect washroom sealant regularly
Include sealant joints in your planned maintenance checks. Look for black spotting, cracks, peeling edges and gaps at the busiest fittings and log what you find.
Water getting behind IPS panels and vanity units can swell the boards. Once that happens, a reseal won’t fix them.
For managing agents and facilities managers
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Throwley can form part of a wider programme across Kent.
Other services in Throwley
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- Access and working height
- Backing rod, priming and other preparation
- Location, for remote and island sites
- The total length or number of joints
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Access details, including height
- Your programme or deadline
- The type of building and who uses it
- The asbestos register, for older buildings
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, phone 01277 525 020 or send details through our quote form.
FAQs: Throwley
Will the toilets in our Throwley building be out of use?
Rarely all at once: work is phased so some facilities are always available. Each area is handed back once the sealant has cured enough to use.
Is Throwley off your patch?
No. Small places get the same service as large ones. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you do washroom sealing in healthcare settings?
Yes, healthcare and care settings are part of our work. Any records you need are confirmed with the quote before we start.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Do you phase washroom resealing?
Only the area we’re working in is closed. Rooms go back into use once the sealant has cured, then we move on.
Is old silicone taken out first?
We always remove it. Fresh silicone can’t key to an old bead, so sealing over it soon peels.