Fire-rated sealing and fire stopping in Templand, Dumfries and Galloway
Work needed on a service penetration in Templand? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Fire-rated sealant that has cracked or shrunk back
- Open linear gaps along the top of fire-resisting walls
- Hidden openings found during inspections
Need fire stopping in Templand?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How the job changes by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, with backing added if the detail requires it.
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range, and the detail may call for board patching or another product.
How we handle fire stopping in Templand
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. Most enquiries involve seals disturbed by maintenance and left open and head-of-wall gaps with no fire seal, across linear gaps at wall heads, service gaps in risers and pipe penetrations. A single leaking joint is often how a building in Templand first comes to us: we look at the rest while we are there and tell you what we find.
Hotels and care homes around smaller places like Templand often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Where
- Templand (DG11)
- Wider area
- Dumfries and Galloway
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Templand
Also in Templand
FAQs: Templand
Would you work within a site like Lochmaben Hospital?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Is Templand too far out for you?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Good photographs up front let us bring everything on the first visit.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How do we ask for a quote?
The quote form is the simplest route, though you can also phone 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Will fire-rated sealant work on every penetration?
No. Each fire-rated sealant is tested for particular services, gap sizes and substrates. Outside that, a different product is needed.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Doing it in-house
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
What affects the price in Templand
These are the things that shape the price:
- The total length or number of joints
- The product specified
- Joint width, depth and condition
- Phasing around occupants
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What we need to price the job
However big the job, the same details help:
- The site address and postcode
- The product your specification calls for
- Anything awkward about access or site hours
- Approximate linear metres or a joint schedule
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
What happens if it’s left?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Templand, a repair visit takes planning, so it’s better to act early.
A quote for service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
Why appoint us
- Work to your specification and the manufacturer’s guidance
- 12-month guarantee on workmanship
- Old sealant cut out, never sealed over
- CHAS accredited
Take a look at how commercial sealant jobs are priced or how we’re accredited.
Aftercare for building managers
Once the work is signed off, these steps help:
- Arrange inspection before areas are covered up
- Settle who seals which penetrations at the start of a project
- Record which product was used where
- Treat an open penetration as a priority repair
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
On site: what to expect
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed before the next one starts. For a building near Templand, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Send your site hours and access windows
- Tell us which areas need to stay in use
- Explain the parking and delivery arrangements
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call 01277 525 020 or email drawings and photos with what you know.
Related advice
Penetration seals near Templand
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
For a hospital such as Lochmaben Hospital, 2.4 miles to the south of Templand, penetration sealing is typically phased ward by ward, with infection-control rules agreed first. Buildings near Templand get the fire-rated product that’s specified, installed to its tested detail.
Templand is about 9 miles north-east of Dumfries, in Dumfries and Galloway. Businesses, contractors and managing agents in Templand use us for work on service penetrations. Templand is one of 139 places we cover in Dumfries and Galloway. Sites around Edinburgh have their own page, roughly 55 miles from Templand.
Business premises anywhere in DG11 are within our area for service penetrations. Buildings on Main Road, Redhall Road and Shaw Road are within our area for service penetrations. Close to Templand, our area also takes in Lochmaben (2 miles south), Nethermill (3 miles west), Halleaths (3 miles south), Johnstonebridge (4 miles north) and Parkgate (4 miles west). Further afield, our area takes in Dumfries (9 miles south-west), Annan (14 miles south-east), Moffat (12 miles north), Heathhall (7 miles south-west), Newbridge Drive (9 miles south-west) and Troqueer (10 miles south-west).
Landmarks near Templand
The nearest railway station is Lockerbie station, roughly 4.3 miles south-east of the centre. Well-known places in the area include Old Lochmaben Castle (2.5 miles south) and Lochmaben Hospital (2.4 miles south). Green spaces nearby include Broomhillbank Hill and Mill Loch.