Fire Stopping in Tarves
Fire-rated and intumescent sealing of service penetrations and linear gaps in Tarves. CHAS accredited and fully insured, with a 12-month guarantee.
- Old intumescent sealant that has split away
- Unsealed joints where partitions meet the slab
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping near Tarves
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Tarves
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. The enquiries we see most involve openings found when ceilings come down for a refit and penetration schedules that need working through, on pipe penetrations, service gaps in risers and cable penetrations. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Tarves is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Hotels and care homes around smaller places like Tarves often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Tarves (AB41)
- Region
- Aberdeenshire
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Site staff or a sealant specialist?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Surface by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, with backing added if the detail requires it.
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes, though larger ones typically call for a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Plastic pipes whose detail calls for a collar or wrap
- Walls or floors that aren’t fire-resisting to begin with
- Signing off or certifying a building’s fire stopping
If in doubt, phone 01277 525 020 or email a schedule or drawings and we will say what we think.
What we seal
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
Why deal with it now?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme. Renewing every failing joint on one visit is the sensible approach for a place like Tarves. Photos of each area help us quote the whole job.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor in Tarves
- Failed material removed, not covered up
- A fixed quote before work starts
- Sealing commercial buildings since 2005
- Our applicators hold CSCS cards
Take a look at how commercial sealant jobs are priced and how we’re accredited.
Common problems we fix in Tarves
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped, and the repair is often skipped.
Typical triggers for a call:
- Non-fire-rated filler around services
- Unsealed penetrations discovered above suspended ceilings
- Snag lists that include open service penetrations
- Open linear gaps along the top of fire-resisting walls
In a building such as Tarves Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Before you book anyone
- Proof of insurance
- What site paperwork they can supply
- Will CSCS-carded applicators be on site?
- Which product they’ll use, and why it suits the joint
More services for Tarves
Common questions from Tarves clients
How do the Scottish rules apply to fire-rated sealing in Tarves?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Is Tarves off your patch?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Can the sealant be colour-matched?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Fire-rated sealing for Tarves buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For buildings in and around Tarves, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Tarves is about 8 miles north-east of Inverurie, in Aberdeenshire. If you’re looking for fire stopping in Tarves, we can help. Across Aberdeenshire, 179 places are covered, Tarves among them. Sites around Aberdeen have their own page, about 15 miles away.
Commercial sites across AB41 are covered. Streets here include Stuart Crescent, Duthie Road and Braiklay Avenue. Sites close to Tarves are covered too, including Pitmedden (3 miles south-east), Udny Green (3 miles south), Methlick (4 miles north), Oldmeldrum (4 miles south-west) and Hattoncrook (4 miles south). Nearby towns on our patch include Inverurie (8 miles south-west), Westhill (15 miles south), Ellon (6 miles east), Turriff (15 miles north-west), Garioch (8 miles south-west) and Kemnay (12 miles south-west).
Landmarks near Tarves
Nearby you will also find Old School Museum (less than half a mile north-east) and Tillyhilt Castle (0.8 miles north-west). Not far away are Upper Lake.
From enquiry to sign-off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. Tell us who will meet us and how to get in at your building near Tarves. We’ll confirm the plan with the fixed quote.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Point out any areas we must not close
- Move anything stored against the joints
- Explain the parking and delivery arrangements
Getting a fixed quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, call 01277 525 020 or email the details over.