Fire Stopping in Pitmedden
Fire-rated and intumescent sealing of service penetrations and linear gaps in Pitmedden. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Fire-stopping items raised at inspection or handover
- Expanding foam used as fire stopping
- Seals disturbed by maintenance and left open
Need fire stopping in Pitmedden?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Pitmedden
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. Most enquiries involve fire-stopping items raised at inspection or handover and expanding foam used as fire stopping, across service gaps in risers, cable penetrations and small duct penetrations where the tested detail allows. A specialist sealant contractor works differently from a general builder: on jobs in Pitmedden, preparation and product choice get the time they need.
Hotels and care homes around smaller places like Pitmedden often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or use the quote form and we’ll arrange a return visit.
- Location
- Pitmedden (AB41)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Pitmedden: questions and answers
Is a smaller place like Pitmedden outside your area?
Not at all. Pitmedden is within our area. Every Scottish council area is within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is hospital work, at somewhere like Kingseat Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Can you fire stop behind the services contractors?
Yes. Send the schedule or marked-up drawings and the specified product details for a fixed quote. Work can run area by area behind the M&E trades.
Is the BS 476 change in 2029 relevant to fire stopping?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029, subject to the Government’s transitional arrangements. After that, the European classification under BS EN 13501-2 is the route. Your designer will choose products with the right evidence.
Will you sign off the seals for us?
No. Approval sits with the designer, principal designer or building control. We will confirm the product and detail installed and agree any further records when we quote.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Why deal with it now?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first. For buildings near Pitmedden, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
We don’t publish prices, since every building and every scope is different. Call for a quote.
What you get with us
- One contact handling all your sites
- Constructionline member for supplier checks
- Products installed to the manufacturer’s instructions
- CHAS accredited contractor
See how commercial sealant jobs are priced and our accreditations.
Towns and villages near Pitmedden
More services for Pitmedden
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Travel to smaller Scottish places like Pitmedden is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. Outside work also needs a suitable weather window.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Preparing the site
- Tell us what induction or permit system the site runs
- Make sure the joints can be reached
- Tell us which areas need to stay in use
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Related advice
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Compartment walls and floors in Pitmedden
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Wherever services are added at a hospital such as Kingseat Hospital, 5.3 miles south of Pitmedden, the compartment line has to be made good with the specified product. For buildings in and around Pitmedden, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Pitmedden is about 8 miles north-east of Inverurie, in Aberdeenshire. We cover Pitmedden, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Aberdeenshire, 179 places are covered, Pitmedden among them. For work in that direction, see our Aberdeen page.
We take on service penetrations across the AB41 postcode area. Streets here include Bronie Crescent, Oldmeldrum Road and Bronieside, and sites on any of them can send details for a fixed quote. If your building is just outside Pitmedden, we cover Udny Green (1 mile south-west), Udny Station (2 miles south-east), Tarves (3 miles north-west), Cultercullen (3 miles south-east) and Hattoncrook (3 miles south-west). Nearby towns on our patch include Inverurie (8 miles south-west), Westhill (13 miles south), Garioch (8 miles south-west), Kemnay (12 miles south-west), Kintore (10 miles south-west) and Oldmeldrum (5 miles west).
Near you in Pitmedden
A little further out are Kingseat Hospital (5.3 miles south) and Tolquhon Castle (1.4 miles north-west). For a walk, there’s Upper Lake.
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Share these points with them:
- Report damaged or disturbed seals as soon as they’re spotted
- Get seals inspected before ceilings and boxing close
- Check with the data sheet before painting over fire sealant
- Agree the fire-stopping specification before services go in
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way unless the designer specifies otherwise.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate.
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Writing the fire-stopping specification
- Gaps in walls that were never built as compartment walls
- Issuing fire ratings or certificates for seals
Not sure which it is? You can call the office on 01277 525 020 or send photos by email and we will tell you honestly.
Surfaces we seal
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations