Srath Carran fire stopping
Sealant work in Srath Carran for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Penetration schedules that need working through
- Unsealed openings around new pipes and cables
- Openings found when ceilings come down for a refit
Fire stopping near Srath Carran
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our fire stopping in Srath Carran
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal. We work on small duct penetrations where the tested detail allows, linear gaps at wall heads and pipe penetrations, and what we’re called in for most is fire sealant pulled out of the opening and service penetrations left open after M&E works. Whether you call it commercial sealant work, mastic application or joint sealing, in Srath Carran it comes down to the same thing: the right product in a properly prepared joint.
Travel to smaller places like Srath Carran is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Srath Carran (IV54)
- Region
- Highland
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for service penetrations
To price the job, we consider:
- Access and working height
- The product specified
- Whether old sealant has to be cut out first
- Induction, permit and paperwork requirements
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- The type of building and who uses it
- A wide shot and a close-up of the area
- Any dates the work must fit around
- The asbestos register, for older buildings
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or email a schedule or drawings.
Questions we are asked in Srath Carran
Which Scottish guidance covers penetration seals in Srath Carran?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Is Srath Carran off your patch?
Not at all. Srath Carran is within our area. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
Can you quote from photographs?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. We will give you an estimate of time on site when we quote.
Can the building stay open while you work?
Usually, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. Travel to smaller Scottish places like Srath Carran is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Before we start on site
- For older buildings, check the asbestos register before work
- Warn occupants and staff about the work
- Tell us your opening times and when work is allowed
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or send photos by email to discuss it first.
Advice
Compartment walls and floors in Srath Carran
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
In a hotel such as Strathcarron Hotel, under half a mile to the south-west of Srath Carran, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Srath Carran (Gaelic: Strathcarron) is in Highland. Across the IV54 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 256 places across Highland fall within our area, including Srath Carran.
We take on service penetrations across the IV54 postcode area, for business premises of every kind. We also cover Achintee (1 mile south), Lochcarron (2 miles south-west), Balnacra (3 miles north-east), Strome Ferry (7 miles south-west) and Torridon (9 miles north) for service penetrations. For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Near you in Srath Carran
Srath Carran has its own railway station: Strathcarron station. Open spaces near Srath Carran include Loch Dùghaill.
Nearby places to Srath Carran
What else we do in Srath Carran
Leave it or put it right?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Renewing every failing joint on one visit is the sensible approach for a place like Srath Carran. Photos of each area help us quote the whole job.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
Why appoint us
- Over 20 years of commercial sealing
- Clear, fixed quotes
- Health and safety: CHAS accredited
- Old sealant cut out, never sealed over
Take a look at our cost guide and our accreditations.
What the job involves on each surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest against the detail’s limits, and any that don’t are flagged.
Drylining partitions
Plasterboard partitions are tested as a specific construction. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
What we are called out for in Srath Carran
When a seal departs from its tested detail, the evidence no longer covers it. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Common reasons buildings call us in:
- Fire seals cut back for extra cables and never reinstated
- Unsealed joints where partitions meet the slab
- Old intumescent sealant that has split away
- Seals that don’t match their tested detail
In a school such as Kirkton in Meikle Strath School, fire-rated sealant goes in around service penetrations where it is specified.
What your quote should include
- How joint depth will be controlled
- The terms of the workmanship guarantee
- Which product they’ll use, and why it suits the joint
- Their plan for phasing and protecting the area
Site staff or a sealant specialist?
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.