Srath Carran expansion joint sealing
Work needed on a movement joint in Srath Carran? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Torn sealant in brick or block movement joints
- Water getting into the wall through a failed joint
- Joints where the bead has lost adhesion
Expansion joint sealing across Srath Carran
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Quoting for work in Srath Carran
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Joint width, depth and condition
- The total length or number of joints
- Working within restricted access windows
- Travel to remote or island sites
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Anything awkward about access or site hours
- The type of building and who uses it
- Photos of the joints, close up and from further back
- The asbestos register, for older buildings
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
About our expansion joint sealing in Srath Carran
Mastic Doctor has sealed movement joints since 2005. Our applicators are CSCS-carded, we’re CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. If you have movement joints with split or torn sealant and damp inside where a wall movement joint has failed, we can help, whatever the surface. Whoever orders the work in Srath Carran, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
In smaller places such as Srath Carran, the joints we are asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
A 12-month guarantee applies to all our work. Should something we installed fail, call the office on 01277 525 020 or send details through our quote form and we’ll come back to it.
- Where
- Srath Carran (IV54)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Where we can, we combine work around Srath Carran with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We look at the joints, their width and how they’ve failed.
- A fixed quote follows, naming the sealant and its movement class.
- We strip out the old seal and prepare the faces.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Have the specification and drawings to hand
- Explain the parking and delivery arrangements
- Tell us which areas need to stay in use
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Advice
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Srath Carran can sit alongside others in a wider programme across Highland.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Nearby places to Srath Carran
What else we do in Srath Carran
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Leaks coming from the membrane rather than the joint seal
- Changing the joint layout or spacing of a structure
If you’re not sure, just speak to us on 01277 525 020 or email the details over and we will give you a straight answer.
What we seal
- Brickwork movement joints
- Podiums and floor movement joints
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
- Blockwork control joints
Common problems we fix in Srath Carran
When a bead pulls away from one face, it has lost adhesion. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes, and it’s common on joints sealed in a hurry.
It’s worth sending us details if you spot any of the following:
- Chipped joint edges on forklift routes
- Torn sealant in brick or block movement joints
- Debris jammed in movement joints
- Leaks through car park deck joints onto the level below
For a school such as Kirkton in Meikle Strath School, playground and building joints can be done in the holidays.
What to look for in a quote
- How the joint faces will be prepared and primed
- Are they CHAS accredited or on Constructionline?
- Their approach to joint depth and backing
- Is the sealant right for the movement and the substrate?
Where floor joints take the most wear near Srath Carran
With the shore within about 1 mile, Srath Carran counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. The west of Scotland, where Srath Carran is, gets more rain than the east. Open joints in external slabs take a lot of water. Dry spells are used for the external joints.
In and around Srath Carran, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Srath Carran (Gaelic: Strathcarron) is in Highland. Any commercial site in Srath Carran is covered, for single jobs and planned programmes alike. Srath Carran is one of 256 places we cover in Highland.
We take on movement joints across the IV54 postcode area. Just outside Srath Carran, we also work in Achintee (1 mile south), Lochcarron (2 miles south-west), Balnacra (3 miles north-east), Strome Ferry (7 miles south-west) and Torridon (9 miles north). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Near you in Srath Carran
Srath Carran has its own railway station: Strathcarron station. Open spaces near Srath Carran include Loch Dùghaill.
Srath Carran: questions and answers
Can being near the sea in Srath Carran affect the sealant we need?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Will our site in Srath Carran have to close for joint sealing?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
When can you be on site?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Does the weather affect joint sealing?
Outside work depends on conditions: rain, frost and condensation all stop sealant bonding. Internal floor joints are far less affected.
Do you reseal car park expansion joints?
Yes. These joints take wheels, salt and water, so product choice matters.
How long will the joint resealing take?
Expect a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints, with phasing where areas must stay open. We’ll confirm when each area can be used again.