Fire stopping in Speldhurst
Fire-rated and intumescent sealing of service penetrations and linear gaps across Speldhurst, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Openings left by services added after handover
- Fire sealant pulled out of the opening
- Expanding foam used as fire stopping
Fire stopping in Speldhurst
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What affects the price in Speldhurst
A fixed quote reflects the actual work. It allows for:
- Phasing around occupants
- Which sealant the job calls for
- How much existing material needs removing
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Approximate linear metres or a joint schedule
- Access details, including height
- Whether the building will be occupied during the work
- When you need the work done
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, phone 01277 525 020 or send details through our quote form.
How we handle fire stopping in Speldhurst
Facilities managers in Speldhurst often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. The enquiries we see most involve service penetrations left open after M&E works and non-fire-rated filler around services, on small duct penetrations where the tested detail allows, linear gaps at wall heads and joints between fire-resisting walls and floors. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Speldhurst is the same: the right product in a properly prepared joint.
Barn and farm-building conversions near places like Speldhurst often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Speldhurst (TN3)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Speldhurst
Will you take on work at estates like Speldhurst Business Park, close to Speldhurst?
Yes. We cover Speldhurst and the area around it, including industrial estates, business parks and retail parks such as Speldhurst Business Park. To start, just give us a call on 01277 525 020 or email us with the unit, the joints involved and your access times.
Is a smaller place like Speldhurst outside your area?
No. Places such as Speldhurst are covered as much as the big towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Will you sign off the seals for us?
No. Sign-off belongs to the designer or building control, not the installer. We’ll confirm the product and detail installed.
Are you members of a third-party fire-stopping installer scheme?
No, and we won’t imply otherwise. Third-party schemes aren’t a legal requirement, but many clients and main contractors ask for them, so check your contract first. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
What will the job cost?
We don’t publish prices, as every site differs. Send photos or drawings and we will price it at a fixed figure.
Do you seal on top of existing sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
From enquiry to sign-off
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we’re cleared to begin, we take the joints in the sequence agreed with you. Smaller jobs around Speldhurst can be grouped with others nearby. A fixed quote is given before anything starts.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
- Flag any permit to work we will need
Request a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Surface by surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed, and we work within it.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Penetration seals near Speldhurst
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Central London is about 28 miles from Speldhurst. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
For a building at a site such as Speldhurst Business Park, which lies south of Speldhurst, a check of penetration seals after each fit-out is good practice. Campus buildings at universities such as Canterbury Christ Church University - Salomons (to the east of Speldhurst) see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. For a building such as Church of St Mary the Virgin, new heating or data runs are the usual reason penetrations need sealing.
Speldhurst is about 2 miles north-west of Royal Tunbridge Wells, in Kent. If you are looking for fire stopping in Speldhurst, we can help. Our Kent coverage takes in 931 places. For work in that direction, see our Brighton page.
Anyone looking for fire stopping in TN3 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Northfields, St Mary's Lane and Penshurst Road and the roads nearby. Close to Speldhurst, our area also takes in Bullingstone (1 mile south-west), Poundsbridge (1 mile west), Stockland Green (1 mile east), Printstile (1 mile north) and Rusthall (1 mile south-east). Bigger towns within reach include Sevenoaks (9 miles north), Tonbridge (4 miles north-east), Kings Hill (12 miles north-east), Paddock Wood (8 miles east), Edenbridge (8 miles north-west) and Allington (15 miles north-east).
Near you in Speldhurst
We work on buildings around Bennett Memorial Diocesan School, The George And Dragon pub and Rose Hill School, among other places. For rail, the closest station is Tunbridge Wells station, roughly 2.5 miles south-east of the centre. Other landmarks nearby include Royal Victoria Place (2.4 miles south-east) and Kent and Sussex Hospital (2.1 miles south-east). Green spaces nearby include Barden Lake and Broadwater Warren RSPB Reserve.
After the work
After handover, these steps help:
- Check with the data sheet before painting over fire sealant
- Brief every trade that openings they make must be sealed
- Keep general-purpose fillers away from compartment walls
- Get seals inspected before ceilings and boxing close
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small.