Allington fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps across Allington, by CSCS-carded applicators. CHAS accredited and fully insured.
- Openings found when ceilings come down for a refit
- Seals that don’t match their tested detail
- Non-fire-rated filler around services
Fire stopping near Allington
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What the job involves on each surface
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range.
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Fire stopping for commercial buildings in Allington
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. We work on linear gaps at wall heads, service gaps in risers and pipe penetrations, and the usual reasons a site gets in touch are fire-stopping items raised at inspection or handover and expanding foam used as fire stopping. Whoever orders the work in Allington, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Converted and extended buildings around places like Allington can mix old and new construction, so the wall or floor a service passes through isn’t always what the drawings assume. The right product depends on the wall or floor and the services passing through, and we’ll tell you if the detail calls for something other than sealant.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Place
- Allington (ME16, ME20, ME14)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Why deal with it now?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme. Over time, UV, weather and movement wear any sealant out. Renewing it in good time keeps the building weathertight.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Why us?
- A Constructionline member, so easy to vet
- CHAS accredited
- A fixed quote before work starts
- Specification-led, product-correct work
See what affects the cost and our accreditations.
Also near Allington
More services for Allington
Questions about Allington
Can work in a care setting near Allington go ahead while residents are there?
Yes, with the manager deciding the order and timing of rooms. We follow the home’s own procedures throughout.
Can you work on a hospital site such as The Somerfield Hospital?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long does a typical visit take?
That varies with the scale of the job, but the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can you quote from photographs?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
Diagnose, treat, sign off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a site in Allington, we plan so the whole job is done in one go where possible. Clear photographs and measurements help us bring the right products.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Have the specification and drawings to hand
- Tell staff and tenants when we will be in
Get a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, give us a call on 01277 525 020 or email drawings and photos.
Advice
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
Aftercare for building managers
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Check risers and ceiling voids after each round of works
- Brief every trade that openings they make must be sealed
- Agree the fire-stopping specification before services go in
- Flag new cables with no seal around them
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted, and the data sheet says which.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Quoting for work in Allington
The price varies from site to site. Expect it to depend on:
- Site requirements such as inductions and permits
- Phasing around occupants
- How much there is to seal
- Location, for remote and island sites
Pricing service penetrations depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
Sending details for a quote
Good information means a firmer quote. When you get in touch, include:
- The asbestos register, for older buildings
- What the building is and how it’s used
- When you need the work done
- Any specification or named product
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Service penetrations in Allington buildings
Two care or nursing homes sit less than 2 miles from Allington. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. At about 29 miles from central London, Allington is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal.
On a hospital site such as The Somerfield Hospital, 0.8 miles south-east of Allington, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. At a college such as MidKent College Maidstone Campus, which lies south of Allington, checking penetration seals after summer M&E works is good practice. Shop fits on retail sites such as Mid Kent Shopping Centre, less than half a mile to the south-east of Allington, can bring new services through fire-resisting walls between units, to be sealed with the specified product.
Allington is about 2 miles north-west of Maidstone, in Kent. Businesses, contractors and managing agents in Allington can call on us for service penetrations, as part of our coverage of Kent. Allington is one of 931 places we cover in Kent for service penetrations. For work in that direction, see our London page (29 miles or so).
Anyone looking for fire stopping in ME16, ME20 and ME14 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Wyatt Road, Beaver Road and Godwin Road. Nearby places we also cover include Aylesford (1 mile north-west), Fant (1 mile south), Ditton (2 miles west), East Farleigh (2 miles south) and Kettle Corner (2 miles south-west). Bigger towns within reach include Sittingbourne (11 miles east), Sevenoaks (13 miles west), Royal Tunbridge Wells (14 miles south-west), Gravesend (11 miles north-west), Tonbridge (11 miles south-west) and Northfleet (12 miles north-west).
Around Allington
We work on buildings around St. Simon Stock Catholic School, Whatman Park and Malta Inn and the streets around them. The closest station to Allington is Barming station, roughly 0.8 miles west of the centre. Well-known places in the area include Queen's Own Royal West Kent Regiment Museum (1.3 miles south-east) and Fremlin Walk (1.3 miles south-east). Green spaces nearby include Burham Down and Boxley Hills.