Sholden fire stopping
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Sholden and the surrounding area. Send photographs or drawings for a fixed quote.
- Non-fire-rated filler around services
- Snag lists that include open service penetrations
- Damaged fire seals in risers and voids
Fire stopping near Sholden
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Keep product data and details in the fire safety file
- Agree the fire-stopping specification before services go in
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Check with the data sheet before painting over fire sealant
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate.
About our fire stopping in Sholden
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Sholden. Site teams most often ask us about expanding foam used as fire stopping and openings found when ceilings come down for a refit, across joints between fire-resisting walls and floors, pipe penetrations and linear gaps at wall heads. One point of contact handles commercial sealant work in Sholden from the first photos to the final walk-round, for single jobs and planned programmes alike.
A job near Sholden is normally planned around one visit, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Sholden (CT14)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Different surfaces, different methods
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness first.
Metal pipes
Heat travels along metal pipework, and some details add wrapping or a set length of insulation. We follow whatever the detail requires and flag anything we can’t match.
For managing agents and facilities managers
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Places near Sholden
Also in Sholden
How a job runs
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. For work around Sholden, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Let building users know which areas are affected
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, call 01277 525 020 or send photos by email.
Advice
Where services cross fire walls in Sholden
Sholden lies roughly 66 miles out from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal. There are plenty of hotels within about 2 miles of Sholden. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product.
Older community buildings such as Church of St Nicholas that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hotels like The Rose Hotel, 1.3 miles to the east of Sholden, are refurbished in phases, and each phase can open up compartment walls. For a hospital such as Victoria Hospital (0.8 miles south-east of Sholden), penetration sealing is typically phased ward by ward, with infection-control rules agreed first.
Sholden is about 1 mile north-west of Deal, in Kent. Our applicators travel to Sholden for work on service penetrations. Sholden is one of 931 places we cover in Kent. Sites around London have their own page, about 66 miles away.
We take on service penetrations across the CT14 postcode area, whatever the building. If your site is on The Street, London Road and Colmanton Grove or close by, send details and we’ll quote for service penetrations. Just outside Sholden, we also work in Sholden Meadows (1 mile west), Mill Hill (1 mile south), Great Mongeham (1 mile south-west), Deal (1 mile south-east) and Finglesham (1 mile north-west). A short drive away, we cover Canterbury (13 miles west), Margate (11 miles north), Dover (7 miles south-west), Folkestone (13 miles south-west), Ramsgate (8 miles north) and Broadstairs (10 miles north).
Near you in Sholden
We work on buildings around Betteshanger Park, Castle Community College and The Magnet pub and the streets around them. The closest station to Sholden is Deal station, roughly 1.1 miles east. Other landmarks nearby include Deal Castle (1.4 miles east) and Kent Museum of the Moving Image (1.2 miles east). The countryside around Sholden includes Monk's Wall nature reserve.
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
When something else is needed
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Openings that need collars, wraps, batts or boards rather than sealant
- Signing off or certifying a building’s fire stopping
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can call the office on 01277 525 020 or send photos by email and we’ll tell you honestly.
Joints and surfaces we work on
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
Sholden: questions and answers
Do you work on fire-rated sealing in hotels in Sholden?
Yes. We install fire-rated and intumescent sealant where it is specified. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
How does the move away from BS 476 affect penetration seals in Sholden?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
When can you be on site?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Do you offer coloured sealant?
That depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Is the work guaranteed?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.