Fire Stopping in Finglesham
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Finglesham and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Hidden openings found during inspections
- Builders’ foam or ordinary silicone in compartment walls
- Fire sealant pulled out of the opening
Fire stopping for businesses in Finglesham
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Finglesham
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. We work on linear gaps at wall heads, cable penetrations and small duct penetrations where the tested detail allows, and what we are called in for most is fire stopping installed outside its tested range and old intumescent sealant that has split away. A specialist sealant contractor works differently from a general builder: on jobs in Finglesham, preparation and product choice get the time they need.
For a smaller site near Finglesham, we plan to do all the penetrations in one go, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Finglesham (CT14)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Do you cover business parks and estates near Finglesham, such as Birnham Farm Business Centre?
Yes. We cover Finglesham and the area around it, including industrial estates, business parks and retail parks such as Birnham Farm Business Centre. Send details of the unit and the work through our quote form for a quick quote.
Is hospital work, at somewhere like Victoria Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
How many days will you need on site?
That varies with the scale of the job, though a typical visit typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
What will the job cost?
There isn’t a price list, as every site differs. Send photos or drawings and we will price it at a fixed figure.
Do you design or specify fire stopping?
No. The specification comes from your designer, fire engineer or building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
Surface by surface
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range and we’ll tell you what the detail says instead.
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. We reseal around them to the specified detail, and any bundle too large for sealant alone is flagged.
Places near Finglesham
More services for Finglesham
Honest limits
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Signing off or certifying a building’s fire stopping
- Fire doors, dampers or other fire safety equipment
- Walls or floors that aren’t fire-resisting to begin with
If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Where we work in Finglesham
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
Maintenance after handover
After handover, these steps help:
- Brief every trade that openings they make must be sealed
- Arrange inspection before areas are covered up
- Leave fire sealant to cure fully before covering it
- Keep product data and details in the fire safety file
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
How the quote is worked out
What shapes the price:
- The site’s rules and procedures
- Travel to remote or island sites
- The product specified
- Whether the work must be split into stages
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
What to include in your enquiry
Whether it’s one area or a whole building, these details speed things up:
- The postcode of the building
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- The product your specification calls for
To get a fixed quote, phone 01277 525 020 or send details through our quote form with the site address and an outline of the work. Our quote form is another easy route.
From enquiry to sign-off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. For work around Finglesham, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Let us know about inductions and permits
- Tell us your opening times and when work is allowed
- For older buildings, check the asbestos register before work
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
Fire stopping around Finglesham: points for this area
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Central London is about 65 miles from Finglesham. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls.
Schools such as Northbourne Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards. Office fit-outs on sites such as Birnham Farm Business Centre (2.9 miles north-west of Finglesham) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. In a building such as Church of St George, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Finglesham is about 2 miles north-west of Deal, in Kent. We send applicators to Finglesham for service penetrations, handled exactly as we handle every other area. We work across 931 places in Kent. For work in that direction, see our London page, about 65 miles away.
If you need fire stopping in CT14, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your building is just outside Finglesham, we cover Marley (1 mile south-west), Hacklinge (1 mile north-east), Ham (1 mile north-west), Northbourne (1 mile south) and Sholden Meadows (1 mile south-east). A short drive away, we cover Canterbury (12 miles west), Margate (10 miles north), Dover (7 miles south), Folkestone (13 miles south-west), Ramsgate (8 miles north) and Broadstairs (9 miles north).
Around Finglesham
Recent enquiries here include premises near Sandwich Technology School, Betteshanger Park and The Crown Inn. Finglesham’s nearest station is Sandwich station, about 2.4 miles north. Other landmarks nearby include Deal Museum (2.5 miles east) and Sandown Castle (2.4 miles east). For a walk, there’s Monk's Wall nature reserve.
Should maintenance staff do it?
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.