Fire stopping in Shide
Fire stopping for Shide, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Hidden openings found during inspections
- Seals that don’t match their tested detail
- Fire-rated sealant that has cracked or shrunk back
Fire stopping near Shide
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Shide, done properly
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you have fire stopping installed outside its tested range and hidden openings found during inspections, we can help, whatever the surface. Whoever orders the work in Shide, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Converted and extended buildings around places like Shide can mix old and new construction, so it’s worth confirming the wall or floor type before choosing the seal. The right product depends on the wall or floor and the services passing through, and we will tell you if the detail calls for something other than sealant.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Shide (PO30)
- Region
- Isle of Wight
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Shide
What does the BS 476 change mean for fire-rated sealant in Shide?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Is hospital work, at somewhere like Laidlaw Day Hospital, something you do?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
How do we ask for a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
Do you work in Shide?
Yes. Sites across Shide are covered, and the same phone number covers every area.
Do you offer coloured sealant?
That depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Is your workmanship covered by a guarantee?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Will you come and look before quoting?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
Building owners, agents and FMs in Shide
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Service penetrations in Shide buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Several hotels sit less than 2 miles from Shide. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Wherever services are added at a hospital such as Laidlaw Day Hospital, 1.2 miles north of Shide, the compartment line has to be made good with the specified product. Colleges such as HTP Apprenticeship College (to the north of Shide) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Shide is about 1 mile south-east of Newport, in the Isle of Wight. Across the PO30 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 125 places across the Isle of Wight fall within our area, Shide among them. For work in that direction, see our Portsmouth page.
Commercial sites across PO30 are covered for service penetrations. Among the streets we cover are Pan Lane, Ash Road and Dairy Lane, and sites on any of them can send details for a fixed quote. Shide sits on or close to the A3020, which helps when planning parking and deliveries for the job. We also cover Newport (1 mile north-west), Blackwater (1 mile south), Downend (2 miles east), Merstone (3 miles south-east) and Rookley (3 miles south). A short drive away, we cover Ryde (6 miles east), Cowes (5 miles north), Sandown (6 miles south-east), Shanklin (7 miles south-east), Ventnor (8 miles south-east) and East Cowes (4 miles north). For island and remote sites, we plan travel and materials carefully, so include the location in your enquiry.
Landmarks near Shide
In Shide, that means premises near Christ The King College, The Cranbourne Arms Public House and Island Innovation VI Form Campus. Well-known places in the area include St Mary's Hospital (1.3 miles north) and Carisbrooke Castle (1 mile west). Not far away are Mill Hill and Briddlesford Nature Reserve.
After the work
Once the work is signed off, a little attention goes a long way:
- Leave fire sealant to cure fully before covering it
- Ask the designer to confirm details early on refits
- Keep product data and details in the fire safety file
- Get seals inspected before ceilings and boxing close
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
How a job runs
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. If neighbouring businesses or buildings around Shide need work too, visits can be combined. Tell us your site hours and we’ll plan around them.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Tell staff and tenants when we’ll be in
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or email the details over.
Advice
What else we do in Shide
Why act early in Shide
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Sealant hardens, cracks and loses grip with age, UV and movement. Renewing it in good time keeps the building weathertight.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Why appoint us
- Fully insured, including public liability cover
- A fixed quote before work starts
- Constructionline member for supplier checks
- Specification-led, product-correct work
Read our cost guide and our accreditations.
When to call us in Shide
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and the wrong product can split as a result. Linear joint details set a width range and movement capability, and the seal has to sit within them.
If one of these sounds familiar, it’s time for a closer look:
- Fire-rated sealant that has cracked or shrunk back
- Expanding foam used as fire stopping
- Head-of-wall gaps with no fire seal
- Hidden openings found during inspections
At a retail site such as Newport Retail Park, which lies north-east of Shide, walls between units may be fire-resisting, so services added in a refit need the specified seal.
Before you book anyone
- What the guarantee covers, and for how long
- How joint depth will be controlled
- What level of public liability insurance do they hold?
- Whether their applicators hold CSCS cards
How the quote is worked out
There’s no standard rate for sealant work, because every site is different. What we take into account:
- The total length or number of joints
- How accessible the joints are
- Which sealant the job calls for
- Site requirements such as inductions and permits
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- Your programme or deadline
- The postcode of the building
- Access details, including height
- The type of building and who uses it
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call the office on 01277 525 020 or send details through our quote form to discuss it first.