
Fire stopping in Shadoxhurst
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Shadoxhurst and the surrounding area. Send photographs or drawings for a fixed quote.
- Openings left by services added after handover
- Open linear gaps along the top of fire-resisting walls
- Seals that don’t match their tested detail
Fire stopping near Shadoxhurst
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Diagnose, treat, sign off
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Smaller jobs around Shadoxhurst can be grouped with others nearby. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- For older buildings, check the asbestos register before work
- Send your site hours and access windows
- Warn occupants and staff about the work
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Fire stopping in Shadoxhurst, done properly
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. Those on your schedule are closed with the specified product. We work on small duct penetrations where the tested detail allows, service gaps in risers and pipe penetrations, and what we are called in for most is damaged fire seals in risers and voids and hidden openings found during inspections. Whether you call it commercial sealant work, mastic application or joint sealing, in Shadoxhurst it comes down to the same thing: the right product in a properly prepared joint.
Smaller places such as Shadoxhurst still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Work we carry out in Kent comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or email a schedule or drawings and we will arrange a return visit.

- Place
- Shadoxhurst (TN26)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Also near Shadoxhurst
More services for Shadoxhurst
When something else is needed
Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:
- Fire risk assessments, a job for a competent assessor
- Approving the work on behalf of building control
- Construction that lacks the fire resistance the seal relies on
Not sure which it is? You can call 01277 525 020 or email a schedule or drawings and we’ll tell you honestly.
Where we work in Shadoxhurst
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
For managing agents and facilities managers
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Shadoxhurst can sit alongside others in a wider programme.
Shadoxhurst: questions and answers
What does the BS 476 change mean for fire-rated sealant in Shadoxhurst?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you take on a job at a hospital such as William Harvey Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
How long does a typical visit take?
It depends on the scope, but the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Can you work while the building is occupied?
Usually, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How the job changes by surface
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail.
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range, and the detail may call for board patching or another product.
Fire-rated sealing for Shadoxhurst buildings
Shadoxhurst lies roughly 48 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a unit at a site such as Ellingham Industrial Estate, 2.4 miles to the north-east of Shadoxhurst, new power or data runs between office and warehouse can breach a compartment wall. Large healthcare estates like William Harvey Hospital (4.8 miles north-east of Shadoxhurst) change their services often, so penetration seals are worth checking after M&E work. Older community buildings such as Church of St Peter and St Paul that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Shadoxhurst is about 3 miles south-west of Ashford, in Kent. Across the TN26 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. 931 places across Kent fall within our area, including Shadoxhurst. We also cover Brighton, around 45 miles from Shadoxhurst.
If you need fire stopping in TN26, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on The Street, Park Farm Close and Woodchurch Road. If your building is just outside Shadoxhurst, we cover Stubb's Cross (1 mile north-east), Chilmington Green (2 miles north), Kingsnorth (2 miles east), Fleeden (2 miles north) and Stanhope (2 miles north-east). Further afield, our area takes in Ashford (3 miles north-east), Folkestone (15 miles east), Faversham (15 miles north), Hythe (12 miles east), Davington (15 miles north) and Preston (14 miles north).
Around Shadoxhurst
Around Shadoxhurst, our work takes us to commercial buildings near Stone Wood. Shadoxhurst’s nearest station is Ham Street station, about 3.1 miles south-east of the centre. Well-known places in the area include Woodchurch Village Life Museum (2.9 miles south-west) and William Harvey Hospital (4.8 miles north-east). Green spaces nearby include Orlestone Forest.
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- The site’s rules and procedures
- Removal of failed or old sealant
- Phasing around occupants
- Distance, for remote addresses
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Details that help us quote
The more we know, the firmer the quote. Helpful details to send:
- Whether the building will be occupied during the work
- Approximate linear metres or a joint schedule
- Your programme or deadline
- A wide shot and a close-up of the area
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, give us a call on 01277 525 020 or email drawings and photos.
Why it’s worth doing now in Shadoxhurst
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Halls, stores and units around places like Shadoxhurst may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Why appoint us
- A Constructionline member, so easy to vet
- Over 20 years of commercial sealing
- Fully insured
- Work to your specification and the manufacturer’s guidance
See our cost guide and our accreditations.