Chilmington Green fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Chilmington Green and the surrounding area. Send details for a fixed quote.
- Snag lists that include open service penetrations
- Head-of-wall gaps with no fire seal
- Openings left by services added after handover
Fire stopping across Chilmington Green
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Chilmington Green
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. Most enquiries involve seals that don’t match their tested detail and snag lists that include open service penetrations, on cable penetrations, linear gaps at wall heads and pipe penetrations. One point of contact handles commercial sealant work in Chilmington Green from the first photographs to the final walk-round, whether it’s one building or several.
A job near Chilmington Green is typically planned around one visit, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Our workmanship is guaranteed for 12 months, in Chilmington Green as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Chilmington Green (TN23)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Smaller jobs around Chilmington Green can be grouped with others nearby. You’ll have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Point out any areas we must not close
- Let building users know which areas are affected
- Have the specification and drawings to hand
Getting a fixed quote
To get a fixed quote, ring 01277 525 020 or send details through our quote form with the site address and an outline of the work. You can also send details through our quote form.
Advice
Towns and villages near Chilmington Green
Other services in Chilmington Green
What affects the price in Chilmington Green
To price the job, we consider:
- Quantities, in metres or numbers
- How accessible the joints are
- Distance, for remote addresses
- Site requirements such as inductions and permits
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
Before you send an enquiry
We can often quote from photos and a few details. Please tell us:
- The asbestos register, for older buildings
- When you need the work done
- The site address and postcode
- What the building is and how it’s used
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or send photos by email with what you know.
Fire-rated sealing for Chilmington Green buildings
Central London is about 47 miles from Chilmington Green. Office refits around the commuter belt bring new cabling through fire-resisting walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Wherever services are added at a hospital such as William Harvey Hospital, 3.9 miles to the east of Chilmington Green, the compartment line has to be made good with the specified product. Shop fits in centres such as Gallagher Retail Park, 2 miles east of Chilmington Green, can bring new services through fire-resisting walls between units, which then need the specified seal.
Chilmington Green is about 2 miles west of Ashford, in Kent. Businesses, contractors and managing agents in Chilmington Green use us for work on service penetrations. 931 places across Kent fall within our area, Chilmington Green among them. Brighton is covered too, some 46 miles away.
Commercial sites across TN23 are covered for service penetrations. Buildings on Mock Lane, Oakwood Mews and Hays Mews are within our area for service penetrations. We also cover Great Chart (1 mile north-east), Fleeden (1 mile west), Daniel's Water (1 mile north-west), Stanhope (1 mile east) and Stubb's Cross (2 miles south-east). Further afield, our area takes in Canterbury (15 miles north-east), Sittingbourne (15 miles north), Folkestone (15 miles east), Faversham (13 miles north), Hythe (12 miles east) and Davington (13 miles north).
Around Chilmington Green
Locally, jobs take us to sites close to John Wallis Academy, Ashford Community Woodland and The Little Black Dog pub and the streets around them. For rail, the closest station is Ashford International station, about 2.3 miles east. Other landmarks nearby include County Square (2.3 miles north-east) and William Harvey Hospital (3.9 miles east). Not far away are Orlestone Forest.
Commercial clients in Chilmington Green
We work for building owners and managing agents on everything from one building to a spread of sites around Chilmington Green. Several sites can go on one quote, which keeps the paperwork simple.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Chilmington Green can form part of a wider programme.
Do you need fire stopping in Chilmington Green?
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint. The tested detail for a linear joint states the width and movement it covers.
Any of the following is a good reason to get the joints checked over:
- Fire sealant pulled out of the opening
- Fire seals cut back for extra cables and never reinstated
- Openings left by services added after handover
- Unsealed joints where partitions meet the slab
At a college such as Ashford College, which lies north-east of Chilmington Green, checking penetration seals after summer M&E works is good practice.
Comparing quotes
- The terms of the workmanship guarantee
- Their plan for phasing and protecting the area
- How joint depth will be controlled
- Will CSCS-carded applicators be on site?
Questions we’re asked in Chilmington Green
Can you work around term dates at a campus such as Ashford College?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is Ellingham Industrial Estate, near Chilmington Green, within your area?
Yes. We cover Chilmington Green and the area around it, including industrial estates, business parks and retail parks such as Ellingham Industrial Estate. A few photographs and the unit address let us price the work.
Will you sign off the seals for us?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. We work to the specification and the manufacturer’s installation guidance, and any records you need can be confirmed with the quote.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Is Chilmington Green in your area?
Yes. We cover Chilmington Green, and the simplest way to start is to call the office on 01277 525 020 or email us.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How do I request a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
When to bring in a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
How the job changes by surface
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed.