Fire-rated sealing and fire stopping in Sandy Balls, Hampshire
Fire stopping in Sandy Balls, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Penetration schedules that need working through
- Old intumescent sealant that has split away
- Seals disturbed by maintenance and left open
Fire stopping for businesses in Sandy Balls
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Sandy Balls, done properly
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate, and we won’t pretend otherwise. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you have fire-rated sealant that has cracked or shrunk back and open linear gaps along the top of fire-resisting walls, we can put it right, whatever the surface. Searching for sealant specialists in Sandy Balls? We’ve been sealing commercial buildings since 2005.
Around smaller places like Sandy Balls, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Sandy Balls (SP6)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Larger or fire-rated ductwork typically needs a different solution set by the designer, and we’ll say if that applies.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- How much there is to seal
- Backing rod, priming and other preparation
- Location, for remote and island sites
- How accessible the joints are
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Tell us:
- Any specification or named product
- The site address and postcode
- Any dates the work must fit around
- Approximate linear metres or a joint schedule
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or send details through our quote form.
Also in Sandy Balls
Why it’s worth doing now in Sandy Balls
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. Around Sandy Balls, it’s better to renew all the failing joints at once, rather than one at a time. Send photos of each area and we’ll quote for the lot.
Pricing service penetrations depends on how many there are, their condition and the access, plus any specification you’re working to. Ask us for a fixed quote.
What you get with us
- CSCS-carded applicators
- Clear, fixed quotes
- Public liability insurance in place
- 12-month guarantee on workmanship
Take a look at what affects the cost and our accreditations.
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
On site: what to expect
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence, and we clear our waste as we work. For a building around Sandy Balls, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Arrange parking or a loading space
- Share your working hours and any access restrictions
- Send any specification or drawings in advance
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Related advice
Do you need fire stopping in Sandy Balls?
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access typically bring them to light.
These are often picked up first by site or facilities staff:
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
- Builders’ foam or ordinary silicone in compartment walls
- Open linear gaps along the top of fire-resisting walls
For a school such as The Burgate School and Sixth Form, penetration sealing fits best at the end of the summer works.
Before you book anyone
- Whether old or failed sealant will be cut out, not overlaid
- How the joint faces will be prepared and primed
- What site paperwork they can supply
- Can the work be phased to keep areas open?
Service penetrations in Sandy Balls buildings
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Where a unit on an estate such as Arch Farm Industrial Estate, which lies west of Sandy Balls, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. In a building such as St Giles, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Sandy Balls is in Hampshire. We send applicators to Sandy Balls for service penetrations. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Our Southampton page has more on work in that area (16 miles or so).
Work on service penetrations is covered throughout SP6. Buildings on The Pines, River Road and Larch Row are within our area for service penetrations. Sites close to Sandy Balls are covered too, including Godshill (1 mile north-east), Criddlestyle (1 mile south-west), Blissford (1 mile south), Stuckton (1 mile south-west) and Frogham (1 mile south). Nearby towns on our patch include Totton (11 miles east), Lymington (15 miles south-east), Romsey (13 miles east), New Milton (13 miles south), Ringwood (6 miles south) and Barton on Sea (14 miles south).
Local landmarks in Sandy Balls
Locally, jobs take us to sites close to The Fighting Cocks pub. Other landmarks nearby include Fordingbridge Doll Museum (1.3 miles west) and Godshill Castle Hill (0.9 miles north). Not far away are Linbrook Lake and Blashford Lakes.
Questions about Sandy Balls
Is a smaller place like Sandy Balls outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
How does the move away from BS 476 affect penetration seals in Sandy Balls?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
How long do sealant joints last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it, flagging anything that needs clarifying.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.