Fire stopping in Stuckton
Fire stopping for Stuckton, from a contractor working since 2005. Fully insured and CHAS accredited.
- Unsealed penetrations discovered above suspended ceilings
- Fire sealant pulled out of the opening
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for Stuckton sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What sets the cost
These are the things that shape the price:
- Which sealant the job calls for
- How much there is to seal
- Distance, for remote addresses
- Joint width, depth and condition
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
Whether it’s one area or a whole building, these details speed things up:
- Photos of the joints, close up and from further back
- Any specification or named product
- Access details, including height
- When you need the work done
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
How we handle fire stopping in Stuckton
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. If you have unsealed joints where partitions meet the slab and fire seals cut back for extra cables and never reinstated, we can help, on cable penetrations, pipe penetrations and joints between fire-resisting walls and floors alike. A single leaking joint is often how a building in Stuckton first comes to us: we look at the rest while we’re there and tell you what we find.
Around smaller places like Stuckton, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Our workmanship is guaranteed for 12 months, in Stuckton as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Stuckton (SP6)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Fire stopping around Stuckton: what changes locally
For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
Schools such as Hyde Church of England Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards. Hospital estates such as Fordingbridge Hospital, 1 mile to the north-west of Stuckton, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. For a hotel such as Greyhound Hotel, 0.9 miles north-west of Stuckton, penetration seals are worth checking after any refit or services upgrade.
Stuckton is in Hampshire. Stuckton sits inside our coverage and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 723 places in Hampshire. Southampton is covered too, some 17 miles away.
Work on service penetrations is covered throughout SP6, for business premises of every kind. Nearby places we also cover include Criddlestyle (1 mile north), Horseport (1 mile north-west), Hungerford (1 mile south-east), Frogham (1 mile east) and Blissford (1 mile east). Nearby towns on our patch include Totton (12 miles east), Lymington (15 miles south-east), Romsey (14 miles east), New Milton (12 miles south-east), Ringwood (5 miles south) and Barton on Sea (13 miles south).
What’s near Stuckton
Around Stuckton, our work takes us to commercial buildings near The George Inn and The Burgate School and Sixth Form, among other places. A little further out are Godshill Castle Hill (1.8 miles north) and Fordingbridge Doll Museum (0.8 miles north-west). Open spaces near Stuckton include Blashford Lakes and Linbrook Lake.
Why it’s worth doing now in Stuckton
The longer openings stay, the more there tend to be: each new service adds to the list. Keeping on top of it after each round of works keeps the job small and avoids a much larger catch-up later. One visit to deal with every failing joint makes more sense than several trips to a place like Stuckton, rather than one at a time. Photos of every joint help us quote for the whole job.
Pricing service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
What you get with us
- Joints cleaned back to sound surfaces
- Specification-led, product-correct work
- CHAS accredited
- Public liability insurance in place
Read how commercial sealant jobs are priced or our accreditations.
FAQs: Stuckton
What happens to BS 476 references for fire stopping in Stuckton?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Is Arch Farm Industrial Estate, near Stuckton, within your area?
Yes, sites like Arch Farm Industrial Estate are within our area, along with the rest of Stuckton. Photos and a short description are enough for a first look.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Places near Stuckton
What else we do in Stuckton
Building owners, agents and FMs in Stuckton
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is any of the following:
- Openings that need collars, wraps, batts or boards rather than sealant
- Approving the work on behalf of building control
- Fire doors, dampers or other fire safety equipment
If you’re not sure, just phone 01277 525 020 or use the quote form and we will give you a straight answer.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
When to bring in a specialist
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Our process
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Stuckton need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Move anything stored against the joints
- Have the specification and drawings to hand
- Tell us your opening times and when work is allowed
Getting a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to speak to us on 01277 525 020 or email us.