Fire Stopping in Barton on Sea
Fire stopping for Barton on Sea, from a contractor working since 2005. Fully insured and CHAS accredited.
- Seals that don’t match their tested detail
- Penetration schedules that need working through
- Seals disturbed by maintenance and left open
Fire stopping in Barton on Sea
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Barton on Sea
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. Most enquiries involve fire stopping installed outside its tested range and expanding foam used as fire stopping, on pipe penetrations, small duct penetrations where the tested detail allows and cable penetrations. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Barton on Sea is the same: the right product in a properly prepared joint.
In places the size of Barton on Sea, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Barton on Sea (BH25)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When to call us in Barton on Sea
Openings in fire-resisting walls typically appear when services are added or changed. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Things that typically lead to an enquiry:
- Snag lists that include open service penetrations
- Unsealed penetrations discovered above suspended ceilings
- Expanding foam used as fire stopping
- Fire-rated sealant that has cracked or shrunk back
In a school such as New Milton Infant School, fire-rated sealant goes in around service penetrations where it is specified.
Comparing quotes
- Will failed sealant be removed rather than covered?
- Proof of insurance
- How joint depth will be controlled
- Whether primer will be used where the manufacturer specifies it
Towns and villages near Barton on Sea
More services for Barton on Sea
Quoting for work in Barton on Sea
Sealant work doesn’t have a standard rate, since sites vary so much. What we take into account:
- Whether old sealant has to be cut out first
- Travel to remote or island sites
- Working within restricted access windows
- The product specified
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
Good information means a firmer quote. Helpful details to send:
- Where the site is, with the postcode
- How the joints are reached, and at what height
- Whether an asbestos survey exists
- What the building is and how it’s used
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call 01277 525 020 or email the details over.
What happens if it’s left?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. For buildings in places like Barton on Sea, one well-planned visit beats several small ones, so we’d suggest renewing all the joints that are going, not just the worst.
The product called for affects the cost, and so does the preparation. Access, phasing and site rules also count.
Why appoint us
- CHAS accredited contractor
- Fixed quotes based on photos, drawings or a visit
- One number for every site we cover
- Old sealant cut out, never sealed over
General trades versus a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Our process
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Work in places the size of Barton on Sea is planned as a single visit where we can. Clear photographs and measurements help us bring the right products.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Confirm the product named in the specification
- Explain the parking and delivery arrangements
- Flag any permit to work we will need
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
Fire stopping around Barton on Sea: what changes locally
Barton on Sea has five care or nursing homes no more than 2 miles away. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Hotels like Chewton Glen Hotel & Spa, 0.8 miles to the north-west of Barton on Sea, are refurbished in phases, and each phase can open up compartment walls. Halls and meeting rooms at places like Parish Church of St Magdalene sometimes gain new services, and any compartment wall crossed needs the specified seal.
Barton on Sea is in Hampshire. If you’re looking for fire stopping in Barton on Sea, we can help. Across Hampshire, 723 places are covered, Barton on Sea among them. We also cover Southampton, some 17 miles away.
Business premises anywhere in BH25 are within our area. For a building on Barton Drive, Heathy Close and Barton Way or nearby, send details and we will quote for service penetrations. If your building is just outside Barton on Sea, we cover New Milton (1 mile north), Ashley (2 miles north-east) and Downton (2 miles east). Further afield, our area takes in Totton (14 miles north-east), Lymington (5 miles east), Hythe (14 miles north-east), Ringwood (9 miles north-west), Dibden Purlieu (13 miles north-east) and Marchwood (14 miles north-east).
Near you in Barton on Sea
Locally, jobs take us to sites close to The Arnewood School, The Arnewood School and The George Centre pub and the streets around them. The closest station to Barton on Sea is New Milton station, about 1 mile north. Nearby you will also find Highcliffe Castle (2.2 miles west) and Lymington New Forest Hospital (5.5 miles east). Open spaces near Barton on Sea include Milford on Sea LNR.
Common questions from Barton on Sea clients
Is Barton on Sea too far out for you?
Not at all. Barton on Sea is within our area. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Is Gore Road Industrial Estate, near Barton on Sea, within your area?
Yes. We cover Barton on Sea and the area around it, including industrial estates, business parks and retail parks such as Gore Road Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Do you offer coloured sealant?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Which standards are fire seals tested to?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Results are classified under BS EN 13501-2, where E is integrity, I is insulation and the number is minutes, as in EI 60. The rating applies to the product as tested.
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Fire doors, dampers or other fire safety equipment
- Approving the work on behalf of building control
- Walls or floors that aren’t fire-resisting to begin with
Not sure which it is? You can speak to us on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows