Fire stopping in Salen
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Salen and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Openings found when ceilings come down for a refit
- Fire-stopping items raised at inspection or handover
- Seals that don’t match their tested detail
Need fire stopping in Salen?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Salen, done properly
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail, not a rule of thumb. Most enquiries involve damaged fire seals in risers and voids and fire sealant pulled out of the opening, on service gaps in risers, linear gaps at wall heads and cable penetrations. Looking for mastic applicators who cover Salen? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
For a building near Salen, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Salen (PA72)
- Region
- Argyll and Bute
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Common questions from Salen clients
Do you decide the fire-stopping details for buildings in Salen?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How do the Scottish rules apply to fire-rated sealing in Salen?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
When can you be on site?
We are in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Is colour matching possible?
That depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Salen can sit alongside others in a wider programme across Argyll and Bute.
Also in Salen
Looking after the joints
Once the work is signed off, these steps help:
- Keep product data and details in the fire safety file
- Look above ceilings when tiles are lifted for other jobs
- Settle who seals which penetrations at the start of a project
- Brief every trade that openings they make must be sealed
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there, not months later.
Surface by surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest so we know it sits within the tested range.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers and the installation has to fit inside those limits.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Salen are often grouped with others in the same area, to make the most of each trip. Let us know if your dates have any give.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Let us know about inductions and permits
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Related advice
Do you need fire stopping in Salen?
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position, so it has to come out.
Site and facilities staff are often the first to spot these:
- Snag lists that include open service penetrations
- Expanding foam used as fire stopping
- Fire seals cut back for extra cables and never reinstated
- Fire stopping installed outside its tested range
Hotels like The Salen Hotel (under half a mile north of Salen) are refurbished in phases, and each phase can open up compartment walls.
What to look for in a quote
- Their pre-qualification and accreditations
- The named product and why it was chosen
- How long is the guarantee, and what does it include?
- How the joint faces will be prepared and primed
Where services cross fire walls in Salen
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
For buildings in and around Salen, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Salen is in Argyll and Bute. If you’re looking for fire stopping in Salen, we can help, as we do across Argyll and Bute. Salen is one of 124 places in Argyll and Bute on our list. There’s a separate page for Glasgow, about 79 miles away.
If you need fire stopping in PA72, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Jarvisfield Road, Jarvisfield Place and Dunaros Gardens or close by, we can quote for service penetrations. Close to Salen, our area also takes in Lochaline (7 miles east), Baliscate (8 miles north-west), Ballygown (9 miles west), Tobermory (9 miles north-west) and Craignure (9 miles east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or email a schedule or drawings.
Around Salen
Nearby you’ll also find Aros Castle (1.3 miles north-west). For a walk, there’s Cruach Tòrr an Lochain and Loch na Dàiridh.
Quoting for work in Salen
Your fixed quote is built from the real scope. It takes account of:
- How much there is to seal
- The site’s rules and procedures
- Specialist products, such as fire-rated or hygienic sealants
- Whether old sealant has to be cut out first
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Rough lengths or quantities, or drawings if you have them
- Clear photographs of the problem areas
- Whether the building will be occupied during the work
- Where the site is, with the postcode
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or email us.